FSC 1560: Airframe Structural Components
The following documents are a part of this series:- A-A-52686 - Maintenance Kit, Acrylic Plastic Window Refinishing, Aircraft
- AFGS-87222 - Mechanical Systems for Aircraft Doors and Canopies
- AN-4122 - Adapter - Fuel or Oil Tank Filler Cap, Flux, 3 Inch I.D.
- AS-33601 - Track and Stud Fitting for Cargo Transport Aircraft, Standard Dimensions For (STABILIZED Nov 2011)
- MIL-A-25896 - Adapter, Pressure Fuel Servicing, Nominal 2.5-Inch DiameterCH DIAMETER
- MIL-A-27345 - Adapter, Pressure Fuel Servicing, Aircraft, Nominal 4-Inch Diameter
- MIL-A-6425 - Adapter, Pressure Fuel Servicing, Aircraft, General Specification for
- MIL-A-6445 - Adapter, Pressure Fuel Servicing, Type A-3 (See Notice 3 for Replacement Information)
- MIL-B-7010 - Bracket, Gun Trunnion, Type A-1A
- MIL-B-87162 - Baffle Material, Explosion Suppression, Expanded Aluminum Mesh, for Aircraft Fuel Tanks (No Superseding Document)
- MIL-C-27480 - Cap, Safety, Pressure Fuel Servicing, Aircraft Nominal 4-Inch Diameter
- MIL-C-38373 - Cap, Fluid Tank Filler
- MIL-C-7244 - Cap and Adapter Unit, Tank Filler (Superseded by MIL-C-38373)
- MIL-C-81590 - Cockpit Canopy System, Fixed Wing Single and Multi-Place, Fighter, Attack, and Trainer Aircraft, General Specification For
- MIL-C-8605 - Cap; Pressure Fuel Servicing
- MIL-D-5162 - Dome, Navigator S Ovserving, Type A-1B (Supersedes 21112)
- MIL-D-6728 - Damper, Engine Exhaust Flame and Glare (No Superseding Document)
- MIL-DTL-27422 - Tank, Fuel, Crash-Resistant, Ballistic-Tolerant, Aircraft
- MIL-DTL-32331 - Lanyard, Fluid Tank Cap
- MIL-DTL-5578 - Tanks, Fuel, Aircraft, Self-Sealing
- MIL-DTL-6396 - Tanks, Fuel, Oil, Cooling Fluids, Internal, Removable Non-Self-Sealing
- MIL-DTL-87161 - Wire Strand, Nonflexible, for Aircraft Application
- MIL-F-26364 - Fitting, Tank, High Temperature, Non-Self-Sealing, Aircraft and Missile (No Superseding Document)
- MIL-F-26527 - Flange, Adapter Locking, Pressure Fuel Servicing, Aircraft (Superseded by MIL-A-25896)
- MIL-F-5577 - Fitting, Tank, Powerplant Fluid, Removable
- MIL-G-6641 - Gearbox, Aircraft Accessory Drive, General Specification for (No Superseding Document)
- MIL-G-6642 - Gearbox, Aircraft Accessory Drive, Model Specification for (Outline and Instructions for Preparation) (Superseded by MIL-G-6641)
- MIL-H-87990 - Aluminum Honeycomb Sandwich Assemblies, Manufacture of (No Superseding Document)
- MIL-HDBK-349 - Manufacture and Inspection of Adhesive Bonded, Aluminum Honeycomb Sandwich Assemblies for Aircraft
- MIL-HDBK-5 - Metallic Materials and Elements for Aerospace Vehicle Structures (See Notice 2 for Replacement Information)
- MIL-HDBK-5/1 - Volume 1 of 2 Volumes, Metallic Materials and Elements for Aerospace Vehicle Structures
- MIL-HDBK-5/2 - Volume 2 of 2 Volumes, Metallic Materials and Elements for Aerospace Vehicle Structures
- MIL-M-58091 - Maintenance Kit, Acrylic Plastic Window Refinishing, Aircraft (Superseded by A-A-52686)
- MIL-M-87222 - Mechanical Systems for Aircraft Doors and Canopies (Controlled Distribution)
- MIL-P-25996 - Procedure for the Developement of a Cockpit Subsystem and the Accomplishment of System Integration
- MIL-P-7094 - Plastic Parts, Aircraft Exterior, General Requirements and Tests for Rain-Erosion Protection of (No Superseding Document)
- MIL-P-9793 - Pylon Assembly, Outboard SUU-1/a
- MIL-S-25015 - Spinning Requirements for Airplanes (Superseded by MIL-S-83691)
- MIL-S-5704 - Structural Criteria, Piloted Airplanes Wing (Superseded by MIL-A-8861)
- MIL-S-5705 - Structural Criteria, Piloted Airplanes Fuselage, Booms, Engine Mounts and Nacelles (Superseded by MIL-A-8865)
- MIL-S-5706 - Structural Criteria, Piloted Airplanes Empennage and Control Surfaces (Superseded by MIL-A-8861)
- MIL-S-6144 - Sound and Thermal Insulation for Aircraft General Specification for the Installation of (Superseded by SAE as-6144)
- MIL-STD-801 - Inspection and Acceptance Standards for Flexible Fuel Cells and Fittings
- MIL-T-25783 - Tank, Fuel, Aircraft and Missile Non Self Sealing, High Temperature, Removable (No Superseding Document)
- MIL-T-27422 - Tank, Fuel, Crash-Resistant Aircraft
- MIL-T-27711 - Tank, Fuel, Aircraft, Integral Pylon, 650 Gallon, External Jettisonable, Fuselage, Class I
- MIL-T-38044 - Tank, Fuel, Aircraft, Integral Pylon, 450-Gallon, External Jettisonable, Wing, Class 1
- MIL-T-38236 - Tank Assembly, 200 Gallon, External Wing Pylon, Jettisonable, Class 1
- MIL-T-5578 - Tanks, Fuel, Aircraft, Self-Sealing
- MIL-T-5579 - Tank, Self-Sealing Oil, Aircraft (No Superseding Document)
- MIL-T-6396 - Tanks, Aircraft Propulsion Fluid System, Internal, Removable, Non-Self-Sealing
- MIL-T-7378 - Tank, Fuel, Aircraft, External, Auxiliary, Removeable (No Superseding Document)
- MIL-T-81571 - Thermal Protective System, Aircraft Cockpit, General Specification for (No Superseding Document)
- MIL-T-81838 - Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D
- MIL-V-27393 - Valve, Safety, Fuel Cell Fitting, Crash Resistant, General Specification For
- MIL-W-81752 - Windshielded Systems, Fixed Wing Aircraft - General Specification For
- MS-20658 - Terminal, Wire Rope, Swaging, Fork End
- MS-20663 - Ball End, Wire Rope, Swaging, Double Shank
- MS-20664 - Ball End, Wire Rope, Swaging, Single Shank
- MS-21252 - Clevis End, Turnbuckle, Clip Locking
- MS-21253 - Clevis End, Turnbuckle, Clip Locking (for Bearing)
- MS-21254 - Eye End, Turnbuckle, Clip Locking
- MS-21255 - Eye End, Turnbuckle, Clip Locking (for Wire Rope)
- MS-24484 - Adapter, Pressure Fuel Servicing, Nominal 2.5 Inch Diameter
- MS-24681 - Adapter - Pressure Fuel Servicing, Aircraft - Nominal 4-Inch Diameter
- MS-24683 - Housing - Pressure Fuel Servicing Adapter, Outline Of
- MS-24684 - Gasket - Pressure Fuel Servicing Adapter
- MS-27000 - Cap, Safety, Pressure Fuel Servicing, Aircraft, Nominal 4-Inch Diameter
- MS-27379 - Adapter, Fluid Tank Filler (No Superseding Document)
- MS-27380 - Lanyard, Fluid Tank Cap
- MS-29516 - Adapter, Pressure Fuel Servicing, Type A-2 (Use ms-24484)
- MS-29517 - Adapter, Pressure Fuel Servicing, Type A-3 (Use ms-24484)
- MS-29518 - Adapter, Pressure Fuel Servicing, Type A-4 (Use ms-24484)
- MS-29525 - Cap-Pressure Fuel Servicing, Nominal 2 1/2 Inch Diameter, Flush Type
- MS-29526 - Cap-Pressure Fuel Servicing, Nominal 2 1/2 Inch Diameter Non-Flush Type
- MS-29550 - Flange, Attachment, Molded Tank, Flush, Full Molded, Oval, 6 X 10 (No Superseding Document)
- MS-29551 - Flange, Attachment, Molded Tank, Flush, Full Molded, Rectangular, 12 X 18 (No Superseding Document)
- MS-29552 - Flange, Attachment, Molded Tank, Flush and Recessed, Full Molded, Oval, 8 X 10 (No Superseding Document)
- MS-29553 - Cover, Access, Molded Tank, Oval, 8 X 10 (No Superseding Document)
- MS-29554 - Flange, Attachment, Molded Tank, Flush, Full Molded, Rectangular, 8.38 X 14.50 (No Superseding Document)
- MS-29555 - Cover, Access, Molded Tank, Rectangular, 8.38 X 14.50 (No Superseding Document)
- MS-29556 - Flange, Attachment, Molded Tank, Flush and Recessed, Full Molded, Oval, 10 X 16 (No Superseding Document)
- MS-29557 - Cover, Access, Molded Tank, Oval, 10 X 16 (No Superseding Document)
- MS-29558 - Fitting, (O) Ring, Circular, Compression Type, Single Groove, Tank
- MS-29559 - Fitting, (O) Ring, Circular, Thru Bolt Type, Single Groove, Tank
- MS-29560 - Fitting, (O) Ring, Circular, Threaded Insert Type, Single Groove, Tank
- MS-29562 - Fitting, Attachment, Molded, Tank, Thru Hole, Flush, (O) Ring, Rectangular, 10 X 16
- MS-29563 - Fitting, Attachment, Molded, Tank, Flush 'O' Ring, Rectangular, 10 X 16 (No Superseding Document)
- MS-29564 - Fitting, Attachment, Molded Tank, Thru Hole, Flush (O) Ring, Rectangular, 12 X 18
- MS-29565 - Fitting, Attachment, Molded Tank, Flush, (O)Ring, Rectangular, 12 X 18 (No Superseding Document)
- MS-29566 - Fitting, Attachment, Molded Tank, Thru Hole, Flush, (O) Ring, Oval, 8 X 12 (No Superseding Document)
- MS-29567 - Fitting, Attachment, Molded Tank, Thru Hole, Flush, (O) Ring, Oval, 10 X 16 (No Superseding Document)
- MS-29568 - Fitting, Attachment, Molded Tank, Flush, (O) Ring, Oval (No Superseding Document)
- MS-29572 - Cover, Access, Molded Tank, Rectangular, 8.50 X 16.75 (No Superseding Document)
- MS-29573 - Flange, Attachment, Molded Tank, Two Plane, Flush, Full Molded, Circular (No Superseding Document)
- MS-29574 - Flange, Attachment, Molded Tank, Recessed, Full Molded, Oval, 600 X 10.00 (No Superseding Document)
- MS-29575 - Flange, Attachment, Molded Tank, Recessed, Full Molded, Rectangular, 8.50 X 16.75 (No Superseding Document)
- MS-29576 - Flange, Attachment, Molded Tank, Flush and Recessed, Full Molded, Circular (No Superseding Document)
- MS-29577 - Cover, Access, Molded Tank, Oval, 6.00 X 10.00 (No Superseding Document)
- MS-29578 - Cover, Access, Molded Tank, Rectangular, 12.00 X 18.00 (No Superseding Document)
- MS-29579 - Flange, Attachment, Molded Tank, Recessed, Two Plane, Circular (No Superseding Document)
- MS-29580 - Cover, Access, Molded Tank, Circular, 5.12 Dia (No Superseding Document)
- MS-29581 - Flange, Attachment, Molded Tank, Flush and Recessed, Full Molded, Oval, 3.56 X 5.70 (Booster Pump) (No Superseding Document)
- MS-29582 - Flange, Attachment, Molded Tank, Recessed, Full Molded, Rectangular 12.00 X 18.00 (No Superseding Document)
- MS-33581 - Fitting O-Ring General Features of Construction (No Superseding Document)
- MS-33595 - Cover, Access, Molded Tank, Full Molded, General Features of Construction (No Superseding Document)
- MS-33596 - Flange, Attachment, Molded Tank, Full Molded, General Features of Construction (No Superseding Document)
- NAS-23 - Terminal-Tank Strap, Plain
- NAS-24 - Terminal, Tank Strap, Forked
- NAS-25 - Trunnion, Tank Strap, Threaded
- NAS-26 - Trunnion - Tank Strap, Unthreaded
- NAS-27 - Turnbuckle, Tank Strap
- NAS-28 - Bolt-Tee Head
- NAS-29 - Strap Assembly - Tank
- NAS-6 - Manifold-Single Port De-Icer
- QPL-18847 - Tank, Fuel, Aircraft, Auxiliary External Design and Installation Of
- QPL-25896 - Adapter, Pressure Fuel Servicing, Aircraft, Nominal 2.5-Inch Diameter
- QPL-26527 - Flange, Adapter Locking, Pressure Fuel Servicing, Aircraft (Use MIL-A-25896)
- QPL-38373 - Cap, Fluid Tank Filler (No Superseding Document)
- QPL-7244 - Cap and Adapter Unit, Tank Filler
- QPL-781 - Terminal, Wire Rope Swaging, General Specification for
- QPL-8605 - Cap, Pressure Fuel Servicing
- QPL-87162 - Explosion Suppression, Expanded Aluminum Mesh, for Aircraft Fuel Tanks (No Superseding Document)
- QPL-8878 - Turnbuckles, Positive Safetying, General Specification for