Document Center List of Standards on Playgrounds Including Amusement Rides And Devices
ICS Code 97.200.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F1148 - Standard Consumer Safety Performance Specification for Home Playground Equipment
- ASTM-F1292 - Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
- ASTM-F1487 - Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- ASTM-F1918 - Standard Safety Performance Specification for Soft Contained Play Equipment
- ASTM-F1951 - Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
- ASTM-F2075 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
- ASTM-F2375 - Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
- ASTM-F2376 - Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- ASTM-F2479 - Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
- ASTM-F3012 - Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
- ASTM-F3158 - Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device
- ASTM-F3168 - Standard Practice for Hayride Attractions
- ASTM-F3313 - Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
- ASTM-F355 - Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
- ASTM-PS83 - Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment (Withdrawn 1997)
BSI:
- BS-5696-1 - Play Equipment Intended for Permanent Installation Outdoors,General Safety Requirement
- BS-7188 - Impact absorbing playground surfacing. Performance requirements and test methods
- BS-8409 - Fully enclosed play facilities. Code of practice
- BS-EN-1176-1 - Playground equipment and surfacing
- BS-EN-1176-10 - Playground equipment and surfacing
- BS-EN-1176-10-TC - Tracked Changes. Playground equipment and surfacing
- BS-EN-1176-11 - Playground equipment and surfacing
- BS-EN-1176-2 - Playground equipment and surfacing
- BS-EN-1176-3 - Playground equipment and surfacing
- BS-EN-1176-3-TC - Tracked Changes. Playground equipment and surfacing
- BS-EN-1176-4 - Playground equipment and surfacing
- BS-EN-1176-5 - Playground equipment and surfacing
- BS-EN-1176-6 - Playground equipment and surfacing
- BS-EN-1176-7 - Playground equipment and surfacing
- BS-EN-1177 - Impact attenuating playground surfacing. Methods of test for determination of impact attenuation
- BS-EN-IEC-60335-2-82 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60335-2-82-TC - Tracked Changes. Household and similar electrical appliances. Safety
- BS-ISO-17842-1 - Safety of amusement rides and amusement devices
- BS-ISO-17842-2 - Safety of amusement rides and amusement devices
- BS-ISO-17842-2-TC - Tracked Changes. Safety of amusement rides and amusement devices
- BS-ISO-17842-3 - Safety of amusement rides and amusement devices
- BS-ISO-17842-3-TC - Tracked Changes. Safety of amusement rides and amusement devices
- PAS-018 - Specification for children's playground equipment
- PD-CEN-16396 - Playground equipment for children. Replies to requests for interpretation of EN 1176 and its parts
- PD-CEN-16467 - Playground equipment accessible for all children
- PD-CEN-16598 - Collection of rationales for EN 1176. Requirements
- PD-CEN-16598-TC - Tracked Changes. Collection of rationales for EN 1176. Requirements
- PD-CEN-16879 - Siting of Playground and other recreational facilities. Advice on methods for positioning and separation
- PD-CEN-17207 - Playground and recreational areas. Framework for the competence of playground inspectors
- PD-CEN-17842-1 - Playground equipment for children
- PD-CEN-17994 - One post equipment. Inspection guidance
- PD-CEN-18042 - Safety of amusement rides and amusement devices. Replies to requests for interpretation of EN 13814:2019 and its parts
- PD-ISO-17929 - Biomechanical effects on amusement ride passengers
- PD-ISO-24666 - Sports and recreational facilities. Probes for entrapment/entanglement on playground equipment. Collection of data
- PD-ISO-24666-TC - Tracked Changes. Sports and recreational facilities. Probes for entrapment/entanglement on playground equipment. Collection of data
IEC:
- IEC-60335-2-82 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
ISO:
- ISO-17842-1 - Safety of amusement rides and amusement devices - Part 1: Design and manufacture
- ISO-17842-2 - Safety of amusement rides and amusement devices - Part 2: Operation and use
- ISO-17842-3 - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
- ISO-17929 - Biomechanical effects on amusement ride passengers
- ISO-24666 - Sports and recreational facilities - Probes for entrapment/entanglement on playground equipment - Collection of data
- ISO-24667 - Sports and recreational facilities - Impact surfacing testing device
Other SDOs:
- DIN-EN-1176-1 - Part 1: General Safety Requirements & Test Methods, Playground Equipment & Surfacing
- DIN-EN-1176-1/A1 - Amendment 1 To Din-En-1176-1, Playground Equipment, Part 1:General Safety Requirement
- DIN-EN-1176-2 - Part 2: Additional Specific Safety Requirements & Test Methods for Swings, Playground
- DIN-EN-1176-3 - Part 3: Additional Specific Safety Requirements & Test Methods for Slides, Playground
- DIN-EN-1176-4 - Part 4: Additional Specific Safety Requirements & Test Methods for Cableways, Playgrou
- DIN-EN-1176-5 - Part 5: Additional Specific Safety Requirements & Test Methods for Carousels, Playgrou
- DIN-EN-1176-5/A1 - Amendment 1 To Din-En-1176-5, Playground Equipment, Part 5:Additional Specific Safety
- DIN-EN-1176-6 - Part 6: Additional Specific Safety Requirements & Test Methods for Rocking Equipment,
- DIN-EN-1176-6/A1 - Amendment 1 To Din-En-1176-6, Playground Equipment, Part 6:Additional Specific Safety
- DIN-EN-1177 - Impact Absorbing Playground Surfacing, Safety Requirements & Test Methods
- EN-1176-1 - Playground equipment and surfacing - Part 1: General safety requirements and test methods
- EN-1176-10 - Part 10: Additional Specific Safety Requirements & Test Methods for Fully Enclosed Pla
- EN-1176-11 - Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network
- EN-1176-2 - Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
- EN-1176-3 - Part 3: Additional Specific Safety Requirements & Test Methods for Slides, Playground
- EN-1176-4 - Part 4: Additional Specific Safety Requirements & Test Methods for Cableways, Playgrou
- EN-1176-5 - Part 5: Additional Specific Safety Requirements & Test Methods for Carousels, Playgrou
- EN-1176-6 - Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
- EN-1176-7 - Playground Equipment & Surfacing, Guidance on Installation, Inspection, Maintenance &
- EN-1177 - Impact Attenuating Playground Surfacing, Determination of Critical Fall Height
- EN-13814-1 - Safety of amusement rides and amusement devices - Part 1: Design and manufacture
- EN-13814-2 - Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
- EN-13814-3 - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
- SIS-CEN/TR-16396 - Playground equipment for children - Replies to requests for interpretation of EN 1176:2008 and its parts
- SIS-CEN/TR-16467 - Playground equipment accessible for all children
- SIS-CEN/TR-16598 - Collection of rationales for EN 1176 - Requirements
- SIS-CEN/TR-16879 - Siting of Playground and other recreational facilities - Advice on methods for positioning and separation
- SIS-CEN/TR-17842-1 - Playground equipment for children - Part 1: Replies to requests for interpretation of EN 1176:2017 and its parts (2018-2019)
- SIS-CEN/TR-17994 - One post equipment - Inspection guidance
- SS-EN-1176-1 - Playground equipment and surfacing - Part 1: General safety requirements and test methods
- SS-EN-1176-10 - Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
- SS-EN-1176-11 - Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network
- SS-EN-1176-1-AM1 - Playground equipment - Part 1: General safety requirements and test methods
- SS-EN-1176-1-AM2 - Playground equipment - Part 1: General safety requirements and test methods
- SS-EN-1176-2 - Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
- SS-EN-1176-2-AM1 - Playground equipment - Part 2: Additional specific safety requirements and test methods for swings
- SS-EN-1176-3 - Playground equipment and surfacing Part 3: Additional specific safety requirements and test methods for slides
- SS-EN-1176-3-AM1 - Playground equipment - Part 3: Additional specific safety requirements and test methods for slides
- SS-EN-1176-4 - Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
- SS-EN-1176-4-AM1 - Playground equipment - Part 4: Additional specific safety requirements and test methods for runways
- SS-EN-1176-5 - Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels
- SS-EN-1176-5-AM1 - Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels
- SS-EN-1176-5-AM2 - Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels
- SS-EN-1176-6 - Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
- SS-EN-1176-6-AM1 - Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment
- SS-EN-1176-7 - Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation
- SS-EN-1177 - Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
- SS-EN-1177-AM1 - Impact absorbing playground surfacing - Safety requirements and test methods
- SS-EN-13814-1 - Safety of amusement rides and amusement devices - Part 1: Design and manufacture
- SS-EN-13814-2 - Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
- SS-EN-13814-3 - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
- SS-EN-17109 - Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods
- SS-EN-17164 - Climbing/bouldering walls for use in the water area of swimming pools of public use - Safety and operational requirements
- SS-EN-17232 - Water play equipment and features - Safety requirements, test methods and operational requirements