Document Center List of Standards on Industrial Process Measurement And Control
ICS Code 25.040.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D7720 - Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
- ASTM-D7825 - Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer
- ASTM-E2281 - Standard Practice for Process Capability and Performance Measurement
- ASTM-E2425 - Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
- ASTM-F1576 - Guide for Selection of Security Control Systems, Part II - Defining the Central Contol System (Withdrawn 1999)
BSI:
- BS-1646-1 - Symbolic representation for process measurement control functions and instrumentation. Basic requirements
- BS-1646-2 - Symbolic representation for process measurement control functions and instrumentation
- BS-1646-3 - Symbolic representation for process measurement control functions and instrumentation
- BS-1646-4 - Symbolic representation for process measurement control functions and instrumentation
- BS-1655 - Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
- BS-3238-2 - Graphical symbols for components of servo-mechanisms
- BS-5700 - Guide to the selection of charting methods and capability assessment for use in statistical process control
- BS-5700-TC - Tracked Changes. Guide to the selection of charting methods and capability assessment for use in statistical process control
- BS-5793-4 - Industrial-process control valves. Specification for inspection and routine testing
- BS-5863-1 - Analogue signals for process control systems. Specification for direct current signals
- BS-7494-1 - Performance and testing of teleprotection equipment of power systems.
- BS-7986 - Data quality metrics for industrial measurement and control systems. Specification
- BS-EN-1349 - Industrial process control valves
- BS-EN-50325-2 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces
- BS-EN-50325-3 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Smart distributed systems (SDS)
- BS-EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
- BS-EN-60027-6 - Letter symbols to be used in electrical technology
- BS-EN-60027-7 - Letter symbols to be used in electrical technology
- BS-EN-60534-2-1 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-60534-2-3-TC - Tracked Changes. Industrial-process control valves
- BS-EN-60534-2-4 - Industrial-process control valves
- BS-EN-60534-3-1 - Industrial-process control valves
- BS-EN-60534-3-2 - Industrial-process control valves. Dimensions
- BS-EN-60534-4 - Industrial-process control valves
- BS-EN-60534-6-2 - Industrial-process control valves. Mounting details for attachment of positioners to control valves
- BS-EN-60534-8-1 - Industrial-process control valves
- BS-EN-60534-8-2 - Industrial-process control valves
- BS-EN-60534-8-3 - Industrial-process control valves
- BS-EN-60534-8-4 - Industrial-process control valves
- BS-EN-60534-8-4-TC - Tracked Changes. Industrial-process control valves
- BS-EN-60534-9 - Industrial-process control valves
- BS-EN-60770-2 - Transmitters for use in industrial-process control systems
- BS-EN-60770-3 - Transmitters for use in industrial-process control systems
- BS-EN-61003-1 - Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs
- BS-EN-61003-1-TC - Tracked Changes. Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs
- BS-EN-61003-2 - Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs
- BS-EN-61010-2-201 - Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for control equipment
- BS-EN-61010-2-202 - Safety requirements for electrical equipment for measurement, control and laboratory use
- BS-EN-61069-1 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-1-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-2 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-2-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-3 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-3-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-4 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-5 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-5-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-6 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-6-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-7 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-7-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-8 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61131-2 - Programmable controllers
- BS-EN-61131-3 - Programmable controllers
- BS-EN-61131-5 - Programmable controllers
- BS-EN-61131-6 - Programmable controllers
- BS-EN-61131-7 - Programmable controllers
- BS-EN-61131-9 - Programmable controllers
- BS-EN-61158-1 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3 - Digital data communications for measurement and control. Fieldbus for use in industrial control systems
- BS-EN-61158-3-1 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-11 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-13 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-16 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-17 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-20 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-22 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-7 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-8 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4 - Fieldbus standard for use in industrial control systems
- BS-EN-61158-4-1 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-11 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-13 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-16 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-17 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-20 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-22 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-7 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-8 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5 - Digital data communications for measurement and control. Fieldbus for use in industrial control systems
- BS-EN-61158-5-10 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-11 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-13 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-15 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-16 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-17 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-20 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-22 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-23 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-5 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-7 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-8 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5-9 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6 - Digital data communications for measurement and control. Fieldbus for use in industrial control systems
- BS-EN-61158-6-10 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-11 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-13 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-15 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-16 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-17 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-20 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-22 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-23 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-5 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-7 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-8 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-6-9 - Industrial communication networks. Fieldbus specifications
- BS-EN-61285 - Industrial-process control. Safety of analyzer houses
- BS-EN-61285-TC - Tracked Changes. Industrial-process control. Safety of analyzer houses
- BS-EN-61298-1 - Process measurement and control devices. General methods and procedures for evaluating performance
- BS-EN-61298-2 - Process measurement and control devices. General methods and procedures for evaluating performance
- BS-EN-61298-3 - Process measurement and control devices. General methods and procedures for evaluating performance
- BS-EN-61298-4 - Process measurement and control devices. General methods and procedures for evaluating performance
- BS-EN-61326-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-2 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-3 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-4 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-5 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-6 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-3-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-3-2 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61360-6 - Standard data element types with associated classification scheme for electric components
- BS-EN-61499-1 - Function blocks
- BS-EN-61499-2 - Function blocks
- BS-EN-61499-4 - Function blocks
- BS-EN-61508-1 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-2 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-3 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-5 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-6 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-7 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-P1-7 CD - Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Syst
- BS-EN-61511-1 - Functional safety. Safety instrumented systems for the process industry sector
- BS-EN-61512-1 - Batch control
- BS-EN-61512-2 - Batch control
- BS-EN-61512-3 - Batch control
- BS-EN-61514 - Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
- BS-EN-61514-2 - Industrial process control systems
- BS-EN-61557-9 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61784-3 - Industrial communication networks. Profiles
- BS-EN-61784-3-1 - Industrial communication networks. Profiles
- BS-EN-61784-3-12 - Industrial communication networks. Profiles
- BS-EN-61784-3-13 - Industrial communication networks. Profiles
- BS-EN-61784-3-14 - Industrial communication networks. Profiles
- BS-EN-61784-3-17 - Industrial communication networks. Profiles
- BS-EN-61784-3-18 - Industrial communication networks. Profiles
- BS-EN-61784-3-2 - Industrial communication networks. Profiles
- BS-EN-61784-3-2-TC - Tracked Changes. Industrial communication networks. Profiles
- BS-EN-61784-3-3 - Industrial communication networks. Profiles
- BS-EN-61784-3-6 - Industrial communication networks. Profiles
- BS-EN-61784-3-8 - Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 8
- BS-EN-61784-5-1 - Industrial communication networks. Profiles
- BS-EN-61784-5-10 - Industrial communication networks. Profiles
- BS-EN-61784-5-11 - Industrial communication networks. Profiles
- BS-EN-61784-5-12 - Industrial communication networks. Profiles
- BS-EN-61784-5-13 - Industrial communication networks. Profiles
- BS-EN-61784-5-14 - Industrial communication networks. Profiles
- BS-EN-61784-5-15 - Industrial communication networks. Profiles
- BS-EN-61784-5-16 - Industrial communication networks. Profiles
- BS-EN-61784-5-17 - Industrial communication networks. Profiles
- BS-EN-61784-5-18 - Industrial communication networks. Profiles
- BS-EN-61784-5-19 - Industrial communication networks. Profiles
- BS-EN-61784-5-2 - Industrial communication networks. Profiles
- BS-EN-61784-5-3 - Industrial communication networks. Profiles
- BS-EN-61784-5-4 - Industrial communication networks. Profiles
- BS-EN-61784-5-6 - Industrial communication networks. Profiles
- BS-EN-61784-5-8 - Industrial communication networks. Profiles
- BS-EN-61804-2 - Function blocks (FB) for process control
- BS-EN-61804-3 - Function Blocks (FB) for process control and Electronic Device Description Language (EDDL)
- BS-EN-61804-4 - Function blocks (FB) for process control and Electronic Device Description Language (EDDL)
- BS-EN-61804-5 - Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-61918 - Industrial communication networks. Installation of communication networks in industrial premises
- BS-EN-61987-1 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Measuring equipment with analogue and digital output
- BS-EN-61987-10 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-11 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-12 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-13 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-14 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-15 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-16 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-21 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-22 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-23 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-1 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-2 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-3 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-62264-2 - Enterprise-control system integration
- BS-EN-62264-3 - Enterprise-control system integration
- BS-EN-62264-3-TC - Tracked Changes. Enterprise-control system integration
- BS-EN-62339-1 - Modular component interfaces for surface-mount fluid distribution components
- BS-EN-62419 - Control technology. Rules for the designation of measuring instruments
- BS-EN-62424 - Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- BS-EN-62439 - High availability automation networks
- BS-EN-62439-1 - Industrial communication networks. High availability automation networks
- BS-EN-62439-2 - Industrial communication networks. High availability automation networks
- BS-EN-62439-4 - Industrial communication networks. High availability automation networks
- BS-EN-62439-5 - Industrial communication networks. High availability automation networks. Beacon redundancy protocol (BRP)
- BS-EN-62439-6 - Industrial communication networks. High availability automation networks
- BS-EN-62453-1 - Field Device Tool (FDT) interface specification
- BS-EN-62453-2 - Field Device Tool (FDT) Interface Specification
- BS-EN-62453-301 - Field device tool (FDT) interface specification
- BS-EN-62453-302 - Field device tool (FDT) interface specification
- BS-EN-62453-302-TC - Tracked Changes. Field device tool (FDT) interface specification
- BS-EN-62453-303-1 - Field device tool (FDT) interface specification. Communication profile integration. IEC 61784 CP 3/1 and CP 3/2
- BS-EN-62453-303-2 - Field device tool (FDT) interface specification
- BS-EN-62453-306 - Field device tool (FDT) interface specification
- BS-EN-62453-309 - Field device tool (DFT) interface specification
- BS-EN-62453-315 - Field device tool (FDT) interface specification
- BS-EN-62460 - Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations
- BS-EN-62541-10 - OPC unified architecture
- BS-EN-62541-100 - OPC unified architecture
- BS-EN-62541-11 - OPC unified architecture
- BS-EN-62541-13 - OPC unified architecture
- BS-EN-62541-3 - OPC unified architecture
- BS-EN-62541-4 - OPC unified architecture
- BS-EN-62541-5 - OPC unified architecture
- BS-EN-62541-6 - OPC unified architecture
- BS-EN-62541-7 - OPC unified architecture
- BS-EN-62541-8 - OPC unified architecture
- BS-EN-62541-9 - OPC unified architecture
- BS-EN-62591 - Industrial communication networks. Wireless communication network and communication profiles. WirelessHARTTM
- BS-EN-62601 - Industrial networks. Wireless communication network and communication profiles. WIA-PA
- BS-EN-62657-1 - Industrial communication networks. Wireless communication networks
- BS-EN-62657-2 - Industrial communication networks. Wireless communication networks
- BS-EN-62708 - Document kinds for Electrical and Instrumentation Projects in the Process Industry
- BS-EN-62714-1 - Engineering data exchange format for use in industrial automation systems engineering
- BS-EN-62714-2 - Engineering data exchange format for use in industrial automation systems engineering (AutomationML)
- BS-EN-62769-1 - Field device integration (FDI)
- BS-EN-62769-101-1 - Field Device Integration (FDI)
- BS-EN-62769-101-2 - Field Device Integration (FDI)
- BS-EN-62769-103-1 - Field Device Integration (FDI)
- BS-EN-62769-103-4 - Field Device Integration (FDI)
- BS-EN-62769-109-1 - Field Device Integration (FDI)
- BS-EN-62769-2 - Field Device Integration (FDI)
- BS-EN-62769-3 - Devices and integration in enterprise systems; Field Device Integration
- BS-EN-62769-4 - Field Device Integration (FDI)
- BS-EN-62769-5 - Field Device Integration (FDI)
- BS-EN-62769-6 - Field Device Integration (FDI)
- BS-EN-62769-7 - Field Device Integration (FDI)
- BS-EN-62828-2 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-62841-3-14 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-62948 - Industrial networks. Wireless communication network and communication profiles. WIA-FA
- BS-EN-IEC-31010-TC - Tracked Changes. Risk management. Risk assessment techniques
- BS-EN-IEC-60099-8 - Surge arresters
- BS-EN-IEC-60099-8-TC - Tracked Changes. Surge arresters
- BS-EN-IEC-60384-17 - Fixed capacitors for use in electronic equipment
- BS-EN-IEC-60534-1 - Industrial-process control valves
- BS-EN-IEC-60534-3-1 - Industrial-process control valves
- BS-EN-IEC-60684-3-116-TC - Tracked Changes. Flexible insulating sleeving
- BS-EN-IEC-60947-6-2 - Low-voltage switchgear and controlgear
- BS-EN-IEC-61131-10 - Programmable controllers
- BS-EN-IEC-61131-9 - Programmable controllers
- BS-EN-IEC-61131-9-TC - Tracked Changes. Programmable controllers
- BS-EN-IEC-61139-2 - Industrial networks. Single-drop digital communication interface
- BS-EN-IEC-61158-1-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-24-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-25 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-2-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-3-4-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-21-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-24-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-25 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-28 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-4-4-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-10 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-23 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-23-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-24-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-25 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-26 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-26-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-5-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-10 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-21 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-23 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-23-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-24-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-25 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-26 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-27 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61158-6-4-TC - Tracked Changes. Industrial communication networks. Fieldbus specifications
- BS-EN-IEC-61326-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-1-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-1-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-2 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-2-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-3 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-3-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-4 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-4-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-5 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-5-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-6 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-6-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-3-2-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61784-2-2 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-6 - Industrial networks. Profiles
- BS-EN-IEC-61784-3 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-3-13 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-3-2 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-3-3 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-3-8 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-5-12 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-5-19 - Industrial networks. Profiles
- BS-EN-IEC-61784-5-19-TC - Tracked Changes. Industrial networks. Profiles
- BS-EN-IEC-61784-5-2 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-5-20 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-5-21 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-5-3 - Industrial communication networks. Profiles
- BS-EN-IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-2-TC - Tracked Changes. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-3 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-4 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-5 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61918 - Industrial communication networks. Installation of communication networks in industrial premises
- BS-EN-IEC-61987-31 - List of Properties (LOP) of infrastructure devices for electronic data exchange. Generic structures
- BS-EN-IEC-61987-32 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-IEC-61987-92 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-IEC-62149-5 - Fibre optic active components and devices. Performance standards
- BS-EN-IEC-62264-6 - Enterprise-control system integration
- BS-EN-IEC-62381 - Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
- BS-EN-IEC-62382-TC - Tracked Changes. Control systems in the process industry. Electrical and instrumentation loop check
- BS-EN-IEC-62439-2 - Industrial communication networks. High availability automation networks
- BS-EN-IEC-62439-3 - Industrial communication networks. High availability automation networks
- BS-EN-IEC-62439-3-TC - Tracked Changes. Industrial communication networks. High availability automation networks
- BS-EN-IEC-62439-5 - Industrial communication networks. High availability automation networks
- BS-EN-IEC-62443-2-4 - Security for industrial automation and control systems
- BS-EN-IEC-62443-2-4-TC - Tracked Changes. Security for industrial automation and control systems
- BS-EN-IEC-62443-3-2 - Security for industrial automation and control systems
- BS-EN-IEC-62443-4-1 - Security for industrial automation and control systems
- BS-EN-IEC-62443-4-2 - Security for industrial automation and control systems
- BS-EN-IEC-62453-2 - Field device tool (FDT) interface specification
- BS-EN-IEC-62453-2-TC - Tracked Changes. Field device tool (FDT) interface specification
- BS-EN-IEC-62453-302-TC - Tracked Changes. Field device tool (FDT) interface specification
- BS-EN-IEC-62453-303-1 - Field device tool (FDT) interface specification
- BS-EN-IEC-62541-10 - OPC Unified Architecture
- BS-EN-IEC-62541-11 - OPC Unified Architecture
- BS-EN-IEC-62541-12 - OPC unified architecture
- BS-EN-IEC-62541-13 - OPC Unified Architecture
- BS-EN-IEC-62541-14 - OPC unified architecture
- BS-EN-IEC-62541-3 - OPC Unified Architecture
- BS-EN-IEC-62541-4 - OPC Unified Architecture
- BS-EN-IEC-62541-5 - OPC Unified Architecture
- BS-EN-IEC-62541-6 - OPC Unified Architecture
- BS-EN-IEC-62541-7 - OPC unified architecture
- BS-EN-IEC-62541-8 - OPC Unified Architecture
- BS-EN-IEC-62541-9 - OPC Unified Architecture
- BS-EN-IEC-62657-2 - Industrial networks. Coexistence of wireless systems
- BS-EN-IEC-62657-3 - Industrial networks. Coexistence of wireless systems
- BS-EN-IEC-62682-TC - Tracked Changes. Management of alarm systems for the process industries
- BS-EN-IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering. Automation Markup Language
- BS-EN-IEC-62714-2 - Engineering data exchange format for use in industrial automation systems engineering. Automation markup language
- BS-EN-IEC-62714-4 - Engineering data exchange format for use in industrial automation systems engineering. Automation markup language
- BS-EN-IEC-62769-1 - Field Device Integration (FDI)
- BS-EN-IEC-62769-100 - Field device integration (FDI)
- BS-EN-IEC-62769-101-1 - Field device Integration (FDI)
- BS-EN-IEC-62769-101-1-TC - Tracked Changes. Field device Integration (FDI)
- BS-EN-IEC-62769-101-2 - Field Device Integration (FDI)
- BS-EN-IEC-62769-101-2-TC - Tracked Changes. Field Device Integration (FDI)
- BS-EN-IEC-62769-103-1 - Field Device Integration (FDI)
- BS-EN-IEC-62769-103-4 - Field Device Integration (FDI)
- BS-EN-IEC-62769-109-1 - Field devices integration (FDI)
- BS-EN-IEC-62769-109-1-TC - Tracked Changes. Field device integration (FDI)
- BS-EN-IEC-62769-115-2 - Field device integration (FDI)
- BS-EN-IEC-62769-150-1 - Field device integration (FDI)
- BS-EN-IEC-62769-150-1-TC - Tracked Changes. Field device integration (FDI)
- BS-EN-IEC-62769-2 - Field Device Integration (FDI)
- BS-EN-IEC-62769-2-TC - Tracked Changes. Field Device Integration (FDI)
- BS-EN-IEC-62769-3 - Field Device Integration (FDI)
- BS-EN-IEC-62769-4 - Field Device Integration (FDI)
- BS-EN-IEC-62769-4-TC - Tracked Changes. Field Device Integration (FDI)
- BS-EN-IEC-62769-5 - Field device integration (FDI)
- BS-EN-IEC-62769-5-TC - Tracked Changes. Field device integration (FDI)
- BS-EN-IEC-62769-6 - Field Device Integration (FDI)
- BS-EN-IEC-62769-6-100 - Field Device Integration (FDI)
- BS-EN-IEC-62769-6-200 - Field Device Integration (FDI)
- BS-EN-IEC-62769-6-TC - Tracked Changes. Field Device Integration (FDI)
- BS-EN-IEC-62769-7 - Field Device Integration (FDI)
- BS-EN-IEC-62828-1 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-2 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-3 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-4 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62828-5 - Reference conditions and procedures for testing industrial and process measurement transmitters
- BS-EN-IEC-62832-1 - Industrial-process measurement, control and automation. Digital factory framework
- BS-EN-IEC-62832-2 - Industrial-process measurement, control and automation. Digital factory framework
- BS-EN-IEC-62832-3 - Industrial-process measurement, control and automation. Digital factory framework
- BS-EN-IEC-62881 - Cause and Effect Matrix
- BS-EN-IEC-62890 - Industrial-process measurement, control and automation. Life-cycle-management for systems and components
- BS-EN-ISO-10303-210 - Industrial automation systems and integration. Product data representation and exchange. Application protocol. Electronic assembly, interconnection, and packaging design
- BS-EN-ISO-11064-1 - Ergonomic design of control centres
- BS-EN-ISO-11064-2 - Ergonomic design of control centres
- BS-EN-ISO-11064-3 - Ergonomic design of control centres
- BS-EN-ISO-16739-1 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
- BS-EN-ISO-16739-1-CD - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
- BS-EN-ISO-19439 - Enterprise integration. Framework for enterprise modelling
- BS-EN-ISO-19440 - Enterprise integration. Constructs for enterprise modelling
- BS-IEC-61360-7 - Standard data element types with associated classification scheme
- BS-IEC-61511-1 - Functional Safety, Safety Instrumented Systems for the Process Industry Sector, Framew
- BS-IEC-61511-3 - Functional Safety, Safety Instrumented Systems for the Process Industry Sector, Guidan
- BS-IEC-61520 - Metal thermowells for thermometer sensors. Functional dimension
- BS-IEC-61588 - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- BS-IEC-61588-TC - Tracked Changes. Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- BS-IEC-62264-2 - Enterprise-Control System Integration, Object Model Attributes
- BS-IEC-62443-2-1 - Industrial communication networks. Network and system security. Establishing an industrial automation and control system security program
- BS-IEC-62443-3-3 - Industrial communication networks. Network and system security
- BS-IEC-62601 - Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile
- BS-ISO-10303-14 - Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-10303-1-TC - Tracked Changes. Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-10303-2 - Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-10303-232 - Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-10303-235 - Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-11462-1 - Guidelines for implementation of statistical process control (SPC)
- BS-ISO-13584-102 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-20 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-25 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-26 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-31 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-32 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-42-TC - Tracked Changes. Industrial automation systems and integration. Parts library
- BS-ISO-13584-501 - Industrial automation systems and integration. Parts library
- BS-ISO-13584-511 - Industrial automation systems and integration. Parts library
- BS-ISO-14306 - Industrial automation systems and integration. JT file format specification for 3D visualization
- BS-ISO-15531-31 - Industrial automation systems and integration. Industrial manufacturing management data
- BS-ISO-15531-42 - Industrial automation systems and integration. Industrial manufacturing management data
- BS-ISO-15531-43 - Industrial automation systems and integration. Industrial manufacturing management data
- BS-ISO-15531-44 - Industrial automation systems and integration. Industrial manufacturing management data
- BS-ISO-15746-1 - Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems
- BS-ISO-15746-2 - Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems
- BS-ISO-15926-1 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- BS-ISO-15926-10 - Industrial automation systems and integration. Integration of life cycle data for process plants including oil and gas production facilities
- BS-ISO-15926-13 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- BS-ISO-15926-2 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- BS-ISO-16739 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
- BS-ISO-17506 - Industrial automation systems and integration. COLLADA digital asset schema specification for 3D visualization of industrial data
- BS-ISO-18435-2 - Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration
- BS-ISO-18435-3 - Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration
- BS-ISO-18629-1 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-13 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-14 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-41 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-42 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-43 - Industrial automation systems and integration. Process specification language
- BS-ISO-18629-44 - Industrial automation systems and integration. Process specification language
- BS-ISO-18828-4 - Industrial automation systems and integration. Standardized procedures for production systems engineering
- BS-ISO-18828-5 - Industrial automation systems and integration. Standardized procedures for production systems engineering
- BS-ISO-19440 - Enterprise modelling and architecture. Constructs for enterprise modelling
- BS-ISO-20242-5 - Industrial automation systems and integration. Service interface for testing applications
- BS-ISO-23247-1 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-2 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-3 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-4 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23952 - Automation systems and integration. Quality information framework (QIF). An integrated model for manufacturing quality information
- BS-ISO-8000-1 - Data quality
- BS-ISO-8000-110 - Data quality
- BS-ISO-8000-114 - Data quality
- BS-ISO-8000-115 - Data quality
- BS-ISO-8000-115-TC - Tracked Changes. Data quality
- BS-ISO-8000-116 - Data quality
- BS-ISO-8000-117 - Data quality
- BS-ISO-8000-150 - Data quality
- BS-ISO-8000-2 - Data quality
- BS-ISO-8000-62 - Data quality
- BS-ISO-8000-63 - Data quality
- BS-ISO-8000-64 - Data quality
- BS-ISO-8000-66 - Data quality
- BS-ISO-8000-8 - Data quality
- DD-238-1 - Fieldbus. Guide to system architecture
- DD-238-2 - Fieldbus
- DD-ENV-1954 - Internal and external fault behaviour of safety related electronic parts of gas appliances
- DD-IEC-61804-1 - Function blocks (FB) for process control. Overview of system aspects
- DD-IEC-62492-1 - Industrial process control devices. Radiation thermometers. Technical data for radiation thermometers
- DD-IEC/PAS-61499-4 - Function blocks for industrial-process measurement and control systems
- DD-IEC-PAS-61512-3 - Batch Control, General & Site Recipe Models & Representation
- DD-IEC/PAS-61512-3 - Batch control
- DD-IEC/PAS-61512-4 - Batch Control, Batch Production Records
- DD-IEC/PAS61784-3-18 - Industrial communication networks. Profiles
- DD-IEC/PAS-62443-3 - Security for industrial process measurement and control
- DD-IEC/PAS-62573 - Real-time Ethernet. Real-time automation protocol for industrial Ethernet (RAPIEnet)
- DD-IEC/PAS-62591 - Industrial Communication Networks, Fieldbus Specifications, Wirelesshart Communicatio
- DD-IEC/PAS-62601 - Industrial communication networks. Fieldbus Specifications. WIA-PA communication network and communication profile
- DD-IEC/PAS-62633 - Industrial communication networks. Profiles. Additional Fieldbus profiles for real-time networks based on ISO/IEC 8802-3. SNpTYPE
- KIT-127 - Functional Safety, Safety Instrumented Systems (Sis) Kit
- KIT-66 - Functional Safety Set (BS-IEC-61508)
- PAS-1085 - Manufacturing. Establishing and implementing a security-minded approach. Specification
- PD-CLC-61158-1 - Industrial communication networks. Fieldbus specifications
- PD-CLC-61804-4 - Function blocks (FB) for process control
- PD-CLC-62453-41 - Field device tool (FDT) interface specification
- PD-CLC-62453-501 - Field device tool (FDT) interface specification
- PD-CLC-62453-502 - Field device tool (FDT) interface specification
- PD-CLC-62453-503-1 - Field device tool (FDT) interface specification
- PD-CLC-62453-503-2 - Field device tool (FDT) interface specification
- PD-CLC-62453-506 - Field device tool (FDT) interface specification
- PD-CLC-62453-509 - Field device tool (FDT) interface specification
- PD-CLC-62453-51-20 - Field device tool (FDT) interface specification
- PD-CLC-62453-51-31 - Field device tool (FDT) interface specification
- PD-CLC-62453-51-32 - Field device tool (FDT) interface specification
- PD-CLC-62453-515 - Field device tool (FDT) interface specification
- PD-CLC-62453-51-60 - Field device tool (FDT) interface specification
- PD-CLC-62453-51-90 - Field device tool (FDT) interface specification
- PD-CLC-62453-61 - Field device tool interface (FDT) specification
- PD-CLC-62603-1 - Industrial process control systems. Guideline for evaluating process control systems
- PD-CLC-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-CLC-IEC-62443-1-5 - Security for industrial automation and control systems
- PD-CLC-IEC-62453-41 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-42 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-51-10 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-51-150 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-52-150 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-52-31 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-52-32 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-52-90 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62453-62 - Field device tool (FDT) interface specification
- PD-CLC-IEC-62541-1 - OPC unified architecture
- PD-CLC-IEC-62541-2 - OPC unified architecture
- PD-CLC-IEC-63069 - Industrial-process measurement, control and automation. Framework for functional safety and security
- PD-IEC-61131-4 - Programmable controllers
- PD-IEC-61131-8 - Industrial-process measurement and control. Programmable controllers
- PD-IEC-61131-8-TC - Tracked Changes. Industrial-process measurement and control. Programmable controllers
- PD-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems. Functional safety and IEC 61508
- PD-IEC-61508-3-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-IEC-61508-3-2 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-IEC-61832 - Design and installation of on-line analyser systems. Guide to technical enquiry and bid evaluation
- PD-IEC-62390 - Common automation device. Profile guideline
- PD-IEC-62443-1-1 - Industrial communication networks. Network and system security
- PD-IEC-62443-2-3 - Security for industrial automation and control systems
- PD-IEC-62443-6-1 - Security for industrial automation and control systems
- PD-IEC-62453-42 - Field device tool (FDT) interface specification
- PD-IEC-62453-51-31 - Field device tool (FDT) interface specification
- PD-IEC-62453-51-90 - Field device tool (FDT) interface specification
- PD-IEC-62453-62 - Field device tool (FDT) interface specification
- PD-IEC-62492-2 - Industrial process control devices. Radiation thermometers
- PD-IEC-62541-1 - OPC unified architecture
- PD-IEC-62541-2 - OPC unified architecture
- PD-IEC-62603-1 - Industrial process control systems. Guideline for evaluating process control systems. Specifications
- PD-IEC-62794 - Industrial-process measurement, control and automation. Reference modelfor representation of production facilities (digital factory)
- PD-IEC-62795 - Interoperation guide for field device tool (FDT)/device type manager (DTM) and electronic device description language (EDDL)
- PD-IEC-62829-1 - Chemometrics for process analytical technologies
- PD-IEC-62832-1 - Industrial-process measurement, control and automation. Digital factory framework
- PD-IEC-62872 - Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- PD-IEC-62872-1 - Industrial-process measurement, control and automation
- PD-IEC-62967 - Methods for calculating the main static performance indicators of transducers and transmitters
- PD-IEC-63069 - Industrial-process measurement, control and automation. Framework for functional safety and security
- PD-IEC-63144-1 - Industrial process control devices. Thermographic cameras
- PD-IEC-63176 - Process analysis technology systems as part of safety instrumented systems
- PD-IEC-63283-1 - Industrial-process measurement, control and automation. Smart manufacturing
- PD-IEC-63283-2 - Industrial-process measurement, control and automation. Smart manufacturing
- PD-IEC-63283-3 - Industrial-process measurement, control and automation. Smart manufacturing
- PD-IEC/PAS-62734 - Industrial communication networks. Fieldbus specifications. Wireless systems for industrial automation: process control and related applications
- PD-IEC/PAS-62948 - Industrial networks. Wireless communication network and communication profiles. WIA-FA
- PD-IEC/PAS-62953 - Industrial communication networks. Fieldbus specifications
- PD-IEC/PAS-63131 - System control diagram
- PD-IEC/PAS-63178 - Smart manufacturing service platform. Service-oriented integration requirements of the manufacturing resource/capability
- PD-ISO-10303-15 - Industrial automation systems and integration. Product data representation and exchange
- PD-ISO-10303-16 - Industrial automation systems and integration. Product data representation and exchange
- PD-ISO-10303-27 - Industrial automation systems and integration. Product data representation and exchange
- PD-ISO-15926-11 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-11-TC - Tracked Changes. Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-12 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-4 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-4-TC - Tracked Changes. Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-6 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-7 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-15926-8 - Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities
- PD-ISO-16161 - Automation systems and integration. Use case of capability profiles for cooperation between manufacturing software units
- PD-ISO-18101-1 - Automation systems and integration. Oil and gas interoperability
- PD-ISO-18828-1 - Industrial automation systems and integration. Standardized procedures for production systems engineering. Overview
- PD-ISO-18876-1 - Industrial automation systems and integration. Integration of industrial data for exchange, access and sharing
- PD-ISO-18876-2 - Industrial automation systems and integration. Integration of industrial data for exchange, access and sharing
- PD-ISO-23301 - STEP geometry visualization services
- PD-ISO-23301-TC - Tracked Changes. STEP geometry visualization services
- PD-ISO-24064 - Document management. Portable document format. RichMedia annotations conforming to the ISO 10303-242 (STEP AP 242) specification
- PD-ISO-24463 - Digital validation by effective use of simulation
- PD-ISO-24464 - Automation systems and integration. Industrial data. Visualization elements of digital twins
- PD-ISO-8000-60 - Data quality
- PD-ISO-8000-65 - Data quality
- PD-ISO-8000-82 - Data quality
- PD-ISO/IEC-30166 - Internet of things (IoT). Industrial IoT
- PD-ISO/PAS-24644-1 - Mass customization value chain management
- PD-ISO/PAS-8329 - Extended master connection file (MCF). Description of mechanical connections and joints in structural systems
IEC:
- IEC-1069-1 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1: General considerations and methodology
- IEC-1069-2 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
- IEC-1069-3 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
- IEC-1069-5 - Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
- IEC-1297 - Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
- IEC-382 - Analogue pneumatic signal for process control systems
- IEC-60050-351 - International Electrotechnical Vocabulary - Part 351: Control technology
- IEC-60050-351-AM1 - Amendment 1 - International Electrotechnical Vocabulary - Part 351: Control technology
- IEC-60488-2 - Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands
- IEC-60534-1 - Industrial-process control valves - Part 1: Control valve terminology and general considerations
- IEC-60534-1-RL - Industrial-process control valves - Part 1: Control valve terminology and general considerations
- IEC-60534-2-1 - Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
- IEC-60534-2-3 - Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
- IEC-60534-2-4 - Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
- IEC-60534-3-1 - Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
- IEC-60534-3-2 - Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
- IEC-60534-3-3 - Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
- IEC-60534-6-1 - Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
- IEC-60534-6-2 - Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators
- IEC-60534-7 - Industrial-process control valves - Part 7: Control valve data sheet
- IEC-60534-8-1 - Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
- IEC-60534-8-2 - Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
- IEC-60534-8-3 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
- IEC-60534-8-4 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
- IEC-60534-9 - Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
- IEC-60546-1 - Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance
- IEC-60546-2 - Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
- IEC-60770-1 - Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
- IEC-60770-2 - Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
- IEC-60770-3 - Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
- IEC-60873-1 - Electrical and pneumatic analogue chart recorders for use in industrial-process systems - Part 1: Methods for performance evaluation
- IEC-60873-2 - Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing
- IEC-61003-1 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
- IEC-61003-2 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing
- IEC-61010-2-201 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
- IEC-61010-2-201-RL - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
- IEC-61010-2-202 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
- IEC-61069-1 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
- IEC-61069-2 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
- IEC-61069-3 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
- IEC-61069-4 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
- IEC-61069-5 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
- IEC-61069-6 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability
- IEC-61069-7 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
- IEC-61069-8 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties
- IEC-61131-1 - Programmable controllers - Part 1: General information
- IEC-61131-10 - Programmable controllers . Part 10: PLC open XML exchange format
- IEC-61131-2 - Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
- IEC-61131-4 - Programmable controllers - Part 4: User guidelines
- IEC-61131-5 - Programmable controllers - Part 5: Communications
- IEC-61131-6 - Programmable controllers - Part 6: Functional safety
- IEC-61131-7 - Programmable controllers - Part 7: Fuzzy control programming
- IEC-61131-8 - Industrial-process measurement and control - Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages
- IEC-61131-9 - Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
- IEC-61158-1 - Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
- IEC-61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
- IEC-61158-3-1 - Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
- IEC-61158-3-11 - Industrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11 elements
- IEC-61158-3-12 - Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
- IEC-61158-3-13 - Industrial communication networks - Fieldbus specifications - Part 3-13: Data link layer service definition - Type 13 elements
- IEC-61158-3-14 - Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
- IEC-61158-3-16 - Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements
- IEC-61158-3-17 - Industrial communication networks - Fieldbus specifications - Part 3-17: Data-link layer service definition - Type 17 elements
- IEC-61158-3-18 - Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 elements
- IEC-61158-3-19 - Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
- IEC-61158-3-2 - Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
- IEC-61158-3-20 - Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements
- IEC-61158-3-21 - Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements
- IEC-61158-3-22 - Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elements
- IEC-61158-3-24 - Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements
- IEC-61158-3-25 - Industrial communication networks - Fieldbus specifications - Part 3-25: Data-link layer service definition - Type X elements
- IEC-61158-3-2-AM1 - Amendment 1 - Industrial communication networks - Fieldbus specifications - Part 3 - 2: Data-link layer service definition - Type 2 elements
- IEC-61158-3-3 - Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements
- IEC-61158-3-4 - Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
- IEC-61158-3-7 - Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements
- IEC-61158-3-8 - Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements
- IEC-61158-4-1 - Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements
- IEC-61158-4-11 - Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specificationn - Type 11 elements
- IEC-61158-4-12 - Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements
- IEC-61158-4-13 - Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specificationn - Type 13 elements
- IEC-61158-4-14 - Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specificationn - Type 14 elements
- IEC-61158-4-16 - Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements
- IEC-61158-4-17 - Industrial communication networks - Fieldbus specifications - Part 4-17: Data-link layer protocol specification - Type 17 elements
- IEC-61158-4-18 - Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements
- IEC-61158-4-19 - Industrial communication networks - Fieldbus specifications - Part 4 -19: Data-link layer protocol specification - Type 19 elements
- IEC-61158-4-2 - Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements
- IEC-61158-4-20 - Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements
- IEC-61158-4-21 - Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements
- IEC-61158-4-22 - Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specificationn - Type 22 elements
- IEC-61158-4-24 - Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements
- IEC-61158-4-25 - Industrial communication networks - Fieldbus specifications - Part 4-25: Data-link layer protocol specification - Type 25 elements
- IEC-61158-4-3 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements
- IEC-61158-4-4 - Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements
- IEC-61158-4-7 - Part 4-7: Data-Link Layer Protocol Specification - Type 7 Elements, Industrial Communi
- IEC-61158-4-8 - Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 elements
- IEC-61158-5 - Part 5: Application Layer Service Definition, Digital Data Communications for Measurement
- IEC-61158-5-10 - Industrial communication networks . Fieldbus specifications . Part 5-10: Application layer service definition . Type 10 elements
- IEC-61158-5-11 - Industrial communication networks - Fieldbus specifications - Part 5-11: Application layer service definition - Type 11 elements
- IEC-61158-5-12 - Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
- IEC-61158-5-13 - Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements
- IEC-61158-5-14 - Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
- IEC-61158-5-15 - Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements
- IEC-61158-5-16 - Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements
- IEC-61158-5-17 - Industrial communication networks - Fieldbus specifications - Part 5-17: Application layer service definition - Type 17 elements
- IEC-61158-5-18 - Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements
- IEC-61158-5-19 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
- IEC-61158-5-2 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
- IEC-61158-5-20 - Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements
- IEC-61158-5-21 - Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements
- IEC-61158-5-22 - Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 elements
- IEC-61158-5-23 - Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements
- IEC-61158-5-24 - Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements
- IEC-61158-5-25 - Industrial communication networks - Fieldbus specifications - Part 5-25: Application layer service definition - Type 25 elements
- IEC-61158-5-26 - Industrial communication networks - Fieldbus specifications - Part 5-26: Application layer service definition - Type 26 elements
- IEC-61158-5-3 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
- IEC-61158-5-4 - Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements
- IEC-61158-5-5 - Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements
- IEC-61158-5-7 - Industrial communication networks - Fieldbus specifications - Part 5-7: Application layer service definition - Type 7 elements
- IEC-61158-5-8 - Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8 elements
- IEC-61158-5-9 - Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements
- IEC-61158-6 - Part 6: Application Layer Protocol Specification, Digital Data Communications for Measurem
- IEC-61158-6-10 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
- IEC-61158-6-11 - Industrial communication networks - Fieldbus specifications - Part 6-11: Application layer protocol specification - Type 11 elements
- IEC-61158-6-12 - Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification . Type 12 elements
- IEC-61158-6-13 - Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements
- IEC-61158-6-14 - Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements
- IEC-61158-6-15 - Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements
- IEC-61158-6-16 - Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements
- IEC-61158-6-17 - Industrial communication networks - Fieldbus specifications - Part 6-17: Application layer protocol specification - Type 17 elements
- IEC-61158-6-18 - Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18 elements
- IEC-61158-6-19 - Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification . Type 19 elements
- IEC-61158-6-2 - Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements
- IEC-61158-6-20 - Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements
- IEC-61158-6-21 - Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification . Type 21 elements
- IEC-61158-6-22 - Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 elements
- IEC-61158-6-23 - Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements
- IEC-61158-6-24 - Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type 24 elements
- IEC-61158-6-25 - Industrial communication networks - Fieldbus specifications - Part 6-25: Application layer protocol specification . Type 25 elements
- IEC-61158-6-26 - Industrial communication networks - Fieldbus specifications - Part 6-26: Application layer protocol specification - Type 26 elements
- IEC-61158-6-3 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification . Type 3 elements
- IEC-61158-6-4 - Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements
- IEC-61158-6-5 - Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements
- IEC-61158-6-7 - Industrial communication networks - Fieldbus specifications - Part 6-7: Application layer protocol specification - Type 7 elements
- IEC-61158-6-8 - Industrial communication networks - Fieldbus specifications - Part 6-8: Application layer protocol specification - Type 8 elements
- IEC-61158-6-9 - Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
- IEC-61158-SERIES - Digital Data Communications for Measurement & Control - Fieldbus for Use in Industrial
- IEC-61285 - Industrial-process control - Safety of analyser houses
- IEC-61298-1 - Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations
- IEC-61298-2 - Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
- IEC-61298-3 - Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
- IEC-61298-4 - Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content
- IEC-61326 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-1-1 - Amendment 1: Electrical Equipment for Measurement, Control &Laboratory Use - Emc Requi
- IEC-61326-1-2 - Amendment 2: Electrical Equipment for Measurement, Control & Laboratory Use - Emc Requ
- IEC-61326-1-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-2-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
- IEC-61326-2-1-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
- IEC-61326-2-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
- IEC-61326-2-2-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
- IEC-61326-2-3 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
- IEC-61326-2-3-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
- IEC-61326-2-4 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
- IEC-61326-2-4-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
- IEC-61326-2-5 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
- IEC-61326-2-5-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
- IEC-61326-2-6 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
- IEC-61326-2-6-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
- IEC-61326-3-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
- IEC-61326-3-1-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applica
- IEC-61326-3-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
- IEC-61326-3-2-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications wi
- IEC-61360-6 - Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data Dictionary (IEC CDD) quality guidelines
- IEC-61360-7 - Standard data element types with associated classification scheme - Part 7: Data dictionary of cross-domain concepts
- IEC-61499-3 - Part 3: Tutorial Information, Function Blocks for Industrial-Process Measurement & Control
- IEC-61499-4 - Function blocks - Part 4: Rules for compliance profiles
- IEC-61506 - Industrial-process measurement and control - Documentation of application software
- IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508
- IEC-61508-2 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
- IEC-61508-3 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
- IEC-61508-3-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety function
- IEC-61508-3-2 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-2: Requirements and guidance in the use of mathematical and logical techniques for establishing exact properties of software and its documentation
- IEC-61508-4 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
- IEC-61508-5 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
- IEC-61508-6 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
- IEC-61508-7 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
- IEC-61508 CMV - Functional safety of electrical/electronic/programmable electronic safety-related systems - Parts 1 to 7 together with a Commented version (see Functional Safety and IEC 61508)
- IEC-61508-SER - IEC 61508-1, IEC 61508-2, IEC 61508-3, IEC 61508-4, IEC 61508-5, IEC 61508-6 and IEC 61508-7
- IEC-61512-1 - Batch control - Part 1: Models and terminology
- IEC-61512-3 - Batch control - Part 3: General and site recipe models and representation
- IEC-61514 - Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
- IEC-61514-2 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
- IEC-61520 - Metal thermowells for thermometer sensors - Functional dimensions
- IEC-61557-9 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
- IEC-61557-9-CMV - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
- IEC-61588 - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- IEC-61784-3 - Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
- IEC-61784-3-1 - Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
- IEC-61784-3-12 - Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
- IEC-61784-3-12-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
- IEC-61784-3-13 - Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
- IEC-61784-3-14 - Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
- IEC-61784-3-17 - Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
- IEC-61784-3-18 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
- IEC-61784-3-18-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
- IEC-61784-3-2 - Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
- IEC-61784-3-3 - Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
- IEC-61784-3-6 - Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
- IEC-61784-3-8 - Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF8
- IEC-61784-3-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
- IEC-61784-3-RL - Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
- IEC-61784-5-1 - Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1
- IEC-61784-5-10 - Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
- IEC-61784-5-10-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
- IEC-61784-5-11 - Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
- IEC-61784-5-12 - Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
- IEC-61784-5-12-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
- IEC-61784-5-13 - Industrial communication networks - Profiles - Part 5-13: installation of fieldbuses - Installation profiles for CPF 13
- IEC-61784-5-14 - Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14
- IEC-61784-5-15 - Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15
- IEC-61784-5-15-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15
- IEC-61784-5-16 - Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16
- IEC-61784-5-17 - Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17
- IEC-61784-5-18 - Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18
- IEC-61784-5-19 - Industrial communication networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
- IEC-61784-5-2 - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
- IEC-61784-5-20 - Industrial communication networks - Profiles - Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20
- IEC-61784-5-21 - Industrial communication networks - Profiles - Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21
- IEC-61784-5-3 - Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
- IEC-61784-5-3-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
- IEC-61784-5-4 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
- IEC-61784-5-4-AM1 - Amendment 1 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
- IEC-61784-5-6 - Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
- IEC-61784-5-8 - Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8
- IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept
- IEC-61804-3 - Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 3: EDDL syntax and semantics
- IEC-61804-4 - Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 4: EDD interpretation
- IEC-61804-5 - Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
- IEC-61832 - Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation
- IEC-61918 - Industrial communication networks - Installation of communication networks in industrial premises
- IEC-61918-AM1 - Amendment 1 - Industrial communication networks - Installation of communication networks in industrial premises
- IEC-61918-AM2 - Amendment 2 - Industrial communication networks - Installation of communication networks in industrial premises
- IEC-61987-1 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output
- IEC-61987-10 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: List of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals
- IEC-61987-11 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures
- IEC-61987-12 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
- IEC-61987-13 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for pressure measuring equipment for electronic data exchange
- IEC-61987-14 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
- IEC-61987-15 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange
- IEC-61987-16 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: List of properties (LOPs) for density measuring equipment for electronic data exchange
- IEC-61987-21 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
- IEC-61987-22 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
- IEC-61987-23 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
- IEC-61987-24-1 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: List of Properties (LOPs) of positioners and I/P converters for electronic data exchange
- IEC-61987-24-2 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
- IEC-61987-24-3 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
- IEC-61987-31 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 31: List of Properties (LOPs) of infrastructure devices for electronic data exchange . Generic structures
- IEC-61987-92 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 92: Lists of properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs
- IEC-62098 - Evaluation methods for microprocessor- based instruments
- IEC-62140-2 - Part 2: Drum-Level Control, Fossil-Fired Steam Power Stations
- IEC-62140-3 - Part 3: Steam-Temperature Control, Fossil-Fired Steam Powerstations
- IEC-62264-2 - Enterprise-control system integration - Part 2: Object and attributes for enterprise-control system integration
- IEC-62264-3 - Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
- IEC-62264-6 - Enterprise-control system integration . Part 6: Messaging service model
- IEC-62337 - Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
- IEC-62339-1 - Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals
- IEC-62381 - Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
- IEC-62382 - Control systems in the process industry - Electrical and instrumentation loop check
- IEC-62390 - Common automation device - Profile guideline
- IEC-62419 - Control Technology - Rules for the Designation of Measuring Instruments
- IEC-62424 - Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- IEC-62439-1-AM1 - Amendment 1 - Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods
- IEC-62439-2 - Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP)
- IEC-62439-3 - Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)
- IEC-62443-1-1 - Industrial communication networks - Network and system security - Part 1-1: Terminology, concepts and models
- IEC-62443-1-5 - Security for industrial automation and control systems - Part 1-5: Scheme for IEC 62443 security profiles
- IEC-62443-2-1 - Security for industrial automation and control systems - Part 2-1: Security program requirements for IACS asset owners
- IEC-62443-2-3 - Security for industrial automation and control systems - Part 2-3: Patch management in the IACS environment
- IEC-62443-2-4 - Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers
- IEC-62443-2-4-AM1 - Amendment 1 - Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers
- IEC-62443-3-1 - Industrial communication networks - Network and system security - Part 3-1: Security technologies for industrial automation and control systems
- IEC-62443-3-2 - Security for industrial automation and control systems - Part 3-2: Security risk assessment for system design
- IEC-62443-3-3 - Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels
- IEC-62443-4-1 - Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements
- IEC-62443-4-2 - Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components
- IEC-62453-1 - Field device tool (FDT) interface specification - Part 1: Overview and guidance
- IEC-62453-2 - Field device tool (FDT) interface specification - Part 2: Concepts and detailed description
- IEC-62453-2-RL - Field device tool (FDT) interface specification - Part 2: Concepts and detailed description
- IEC-62453-301 - Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1
- IEC-62453-301-AM1 - Amendment 1 - Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1
- IEC-62453-302 - Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
- IEC-62453-302-RL - Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2
- IEC-62453-303-1 - Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
- IEC-62453-303-1-AM1 - Amendment 1 - Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
- IEC-62453-303-2 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
- IEC-62453-303-2-AM1 - Amendment 1 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
- IEC-62453-306 - Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6
- IEC-62453-309 - Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
- IEC-62453-309-RL - Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
- IEC-62453-315 - Field device tool (FDT) Interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15
- IEC-62453-315-AM1 - Amendment1 - Field device tool (FDT) Interface specification - Part 315: Communication profile integration - IEC 61784 CPF 15
- IEC-62453-41 - Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model
- IEC-62453-42 - Field device tool (FDT) interface specification - Part 42: Object model integration profile - Common Language Infrastructure
- IEC-62453-501 - Field device tool (FDT) interface specification - Part 501: Communication implementation for common object model - IEC 61784 CPF 1
- IEC-62453-51-10 - Field device tool (FDT) interface specification - Part 51-10: Communication implementation for common object model - IEC 61784 CPF 1
- IEC-62453-51-150 - Field device tool (FDT) interface specification - Part 51-150: Communication implementation for common object model - IEC 61784 CPF 15
- IEC-62453-51-20 - Field device tool (FDT) interface specification - Part 51-20: Communication implementation for common object model - IEC 61784 CPF 2
- IEC-62453-51-31 - Field device tool (FDT) interface specification - Part 51-31: Communication implementation for common object model - IEC 61784 CP 3/1 and CP 3/2
- IEC-62453-51-32 - Field device tool (FDT) interface specification - Part 51-32: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
- IEC-62453-51-60 - Field device tool (FDT) interface specification - Part 51-60: Communication implementation for common object model - IEC 61784 CPF 6
- IEC-62453-51-90 - Field device tool (FDT) interface specification - Part 51-90: Communication implementation for common object model - IEC 61784 CPF 9
- IEC-62453-52-150 - Field device tool (FDT) interface specification - Part 52-150: Communication implementation for common language infrastructure - IEC 61784 CPF 15
- IEC-62453-52-31 - Field device tool (FDT) interface specification - Part 52-31: Communication implementation for common language infrastructure - IEC 61784 CP 3/1 and CP 3/2
- IEC-62453-52-32 - Field device tool (FDT) interface specification - Part 52-32: Communication implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
- IEC-62453-52-90 - Field device tool (FDT) interface specification - Part 52-90: Communication implementation for common language infrastructure - IEC 61784 CPF 9
- IEC-62453-61 - Field device tool interface specification - Device Type Manager (DTM) Styleguide for common object model
- IEC-62453-62 - Field device tool (FDT) interface specification - Part 62: Field device tool (FDT) styleguide for common language infrastructure
- IEC-62460 - Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations
- IEC-62492-1 - Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers
- IEC-62492-2 - Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical data for radiation thermometers
- IEC-62541-1 - OPC unified architecture - Part 1: Overview and concepts
- IEC-62541-10 - OPC Unified Architecture - Part 10: Programs
- IEC-62541-100 - OPC Unified Architecture - Part 100: Device Interface
- IEC-62541-10-RL - OPC Unified Architecture - Part 10: Programs
- IEC-62541-11 - OPC Unified Architecture - Part 11: Historical Access
- IEC-62541-11-RL - OPC Unified Architecture - Part 11: Historical Access
- IEC-62541-12 - OPC unified architecture - Part 12: Discovery and global services
- IEC-62541-13 - OPC Unified Architecture - Part 13: Aggregates
- IEC-62541-13-RL - OPC Unified Architecture - Part 13: Aggregates
- IEC-62541-14 - OPC unified architecture . Part 14: PubSub
- IEC-62541-1-RL - OPC unified architecture - Part 1: Overview and concepts
- IEC-62541-2 - OPC unified architecture - Part 2: Security Model
- IEC-62541-2-RL - OPC unified architecture - Part 2: Security Model
- IEC-62541-3 - OPC Unified Architecture - Part 3: Address Space Model
- IEC-62541-3-RL - OPC Unified Architecture - Part 3: Address Space Model
- IEC-62541-4 - OPC Unified Architecture - Part 4: Services
- IEC-62541-4-RL - OPC Unified Architecture - Part 4: Services
- IEC-62541-5 - OPC Unified Architecture - Part 5: Information Model
- IEC-62541-5-RL - OPC Unified Architecture - Part 5: Information Model
- IEC-62541-6 - OPC Unified Architecture - Part 6: Mappings
- IEC-62541-6-RL - OPC Unified Architecture - Part 6: Mappings
- IEC-62541-7 - OPC unified architecture - Part 7: Profiles
- IEC-62541-7-RL - OPC unified architecture - Part 7: Profiles
- IEC-62541-8 - OPC Unified Architecture - Part 8: Data Access
- IEC-62541-8-RL - OPC Unified Architecture - Part 8: Data Access
- IEC-62541-9 - OPC Unified Architecture - Part 9: Alarms and Conditions
- IEC-62541-9-RL - OPC Unified Architecture - Part 9: Alarms and Conditions
- IEC-62591 - Industrial networks - Wireless communication network and communication profiles - WirelessHART™
- IEC-62601 - Industrial networks - Wireless communication network and communication profiles - WIA-PA
- IEC-62603-1 - Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
- IEC-62657-2 - Industrial communication networks - Coexistence of wireless systems - Part 2: Coexistence management
- IEC-62657-2-AM1 - Amendment 1 - Industrial communication networks - Wireless communication networks - Part 2: Coexistence management
- IEC-62682 CMV - Management of alarm systems for the process industries
- IEC-62708 - Documents kinds for electrical and instrumentation projects in the process industry
- IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
- IEC-62714-1-RL - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
- IEC-62714-2 - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 2: Semantics libraries
- IEC-62714-4 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 4: Logic
- IEC-62769-1 - Field Device Integration (FDI®) - Part 1: Overview
- IEC-62769-100 - Field device integration (FDI®) - Part 100: Profiles - Generic protocols
- IEC-62769-100-RL - Field device integration (FDI®) - Part 100: Profiles - Generic protocols
- IEC-62769-101-1 - Field device Integration (FDI)® - Part 101-1: Profiles - Foundation Fieldbus H1
- IEC-62769-101-1-RL - Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1
- IEC-62769-101-2 - Field Device Integration (FDI)® - Part 101-2: Profiles - Foundation Fieldbus HSE
- IEC-62769-101-2-RL - Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE
- IEC-62769-103-1 - Field Device Integration (FDI)® - Part 103-1: Profiles - PROFIBUS
- IEC-62769-103-1-RL - Field Device Integration (FDI)® - Part 103-1: Profiles - PROFIBUS
- IEC-62769-103-4 - Field Device Integration (FDI)® - Part 103-4: PROFINET
- IEC-62769-103-4-RL - Field Device Integration (FDI)® - Part 103-4: PROFINET
- IEC-62769-109-1 - Field device integration (FDI)® - Part 109-1: Profiles - HART® and WirelessHART®
- IEC-62769-109-1-RL - Field device integration (FDI)® - Part 109-1: Profiles - HART® and WirelessHART®
- IEC-62769-115-2 - Field device integration (FDI) - Part 115-2: Profiles - Modbus-RTU
- IEC-62769-150-1 - Field device integration (FDI)® - Part 150-1: Profiles - ISA100
- IEC-62769-150-1-RL - Field device integration (FDI)® - Part 150-1: Profiles - ISA100
- IEC-62769-1-RL - Field Device Integration (FDI) - Part 1: Overview
- IEC-62769-2 - Field Device Integration (FDI®) - Part 2: Client
- IEC-62769-2-RL - Field Device Integration (FDI) - Part 2: FDI Client
- IEC-62769-3 - Field Device Integration (FDI®) - Part 3: Server
- IEC-62769-3-RL - Field Device Integration (FDI) - Part 3: Server
- IEC-62769-4 - Field Device Integration (FDI®) - Part 4: FDI Packages
- IEC-62769-4-RL - Field Device Integration (FDI) - Part 4: FDI Packages
- IEC-62769-5 - Field Device Integration (FDI®) - Part 5: FDI Information Model
- IEC-62769-5-RL - Field Device Integration (FDI) - Part 5: Information Model
- IEC-62769-6 - Field Device Integration (FDI®) - Part 6: FDI Technology Mappings
- IEC-62769-6-100 - Field Device Integration (FDI®) - Part 6-100: Technology Mapping - .Net
- IEC-62769-6-200 - Field Device Integration (FDI®) - Part 6-200: Technology Mapping - HTML5
- IEC-62769-6-RL - Field Device Integration (FDI) - Part 6: Technology Mapping
- IEC-62769-7 - Field Device Integration (FDI®) - Part 7: Communication Devices
- IEC-62769-7-RL - Field Device Integration (FDI) - Part 7: Communication Devices
- IEC-62794 - Industrial-process measurement, control and automation - Reference model for representation of production facilities (digital factory)
- IEC-62795 - Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
- IEC-62828-1 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
- IEC-62828-2 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
- IEC-62828-4 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
- IEC-62828-5 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters
- IEC-62829-1 - Chemometrics for process analytical technologies - Part 1: General provisions, and methods for univariate statistics and chemometric processing of data
- IEC-62832-1 - Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles
- IEC-62832-2 - Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements
- IEC-62832-3 - Industrial-process measurement, control and automation - Digital factory framework - Part 3: Application of Digital Factory for life cycle management of production systems
- IEC-62872 - Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- IEC-62872-1 - Industrial-process measurement, control and automation - Part 1: System interface between industrial facilities and the smart grid
- IEC-62881 - Cause and effect matrix
- IEC-62890 - Industrial-process measurement, control and automation - Life-cycle-management for systems and components
- IEC-62948 - Industrial networks - Wireless communication network and communication profiles - WIA-FA
- IEC-62967 - Methods for calculating the main static performance indicators of transducers and transmitters
- IEC-63069 - Industrial-process measurement, control and automation - Framework for functional safety and security
- IEC-63082-1 - Intelligent device management - Part 1: Concepts and terminology
- IEC-63144-1 - Industrial process control devices - Thermographic cameras - Part 1: Metrological characterization
- IEC-63176 - Process analysis technology systems as part of safety instrumented systems
- IEC-63283-1 - Industrial-process measurement, control and automation - Smart manufacturing - Part 1: Terms and definitions
- IEC-63283-2 - Industrial-process measurement, control and automation - Smart Manufacturing - Part 2: Use cases
- IEC-63283-3 - Industrial-process measurement, control and automation - Smart Manufacturing - Part 3: Challenges for cybersecurity
- IEC-63303 - Human machine interfaces for process automation systems
- IEC-654-1 - Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
- IEC-654-2 - Operating conditions for industrial-process measurement and control equipment. Part 2: Power
- IEC-654-2-1 - Amendment No. 1
- IEC-654-3 - Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
- IEC-654-4 - Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences
- IEC-946 - Binary direct voltage signals for process measurement and control systems
- IEC/PAS-60027-6 - Letter Symbols To Be Used in Electrical Technology - Control Technology
- IEC/PAS-61158-3-22 - Part 3-22: Data-Link Layer Service Definition - Type Snptype Elements, Industrial Comm
- IEC/PAS-61158-5-22 - Part 5-22: Application Layer Service Definition - Type Snptype Elements, Industrial Co
- IEC/PAS-61499-1 - Part 1: Architecture, Function Blocks for Industrial-Processmeasurement & Control Systems
- IEC/PAS-61499-2 - Part 2: Software Tools Requirements, Function Blocks for Industrial-Process Measurement &
- IEC/PAS-61499-4 - Part 4: Rules for Compliance Profiles, Function Blocks for Industrial-Process Measurement
- IEC/PAS-61512-3 - Part 3: General & Site Recipe Models & Representation, Batch Control
- IEC/PAS-61512-4 - Part 4: Batch Production Records (Nppas), Batch Control
- IEC/PAS-61784-3-18 - Part 3-18: Functional Safety Fieldbuses - Additional Specifications for Cpf Snpfamily,
- IEC/PAS-61804-1 - Part 1: Overview of System Aspects, Function Blocks (Fb) Forprocess Control
- IEC/PAS-61804-2 - Part 2: Specification of Fb Concept & Electronic Device Description Language (Eddl), Funct
- IEC/PAS-61987-1 - Part 1: Measuring Equipment With Analogue & Digital Output - Industrial Process Measur
- IEC/PAS-62030 - Section 1: Modbus Application Protocol, Specification V1.1A- Section 2: Real-Time Publis
- IEC/PAS-62240 - Use of Semiconductor Devices Outside Manufacturer's Specified Temperature Ranges
- IEC/PAS-62339-1 - Part 1: Elastomeric Seals, Modular Component Interfaces for Surface-Mount Fluid Distr
- IEC-PAS-62381 - Activities During the Factory Acceptance Test (Fat), Site Acceptance Test (Sat), & Site In
- IEC-PAS-62382 - Electrical & Instrumentation Loop Check
- IEC/PAS-62405 - Real-Time Ethernet Vnet/IP Specification
- IEC/PAS-62406 - Real-Time Ethernet Tcnet (Time-Critical Control Network)
- IEC/PAS-62407 - Real-Time Ethernet Control Automation Technology (Ethercat)
- IEC/PAS-62408 - Real-Time Ethernet Powerlink (Epl)
- IEC/PAS-62409 - Real-Time Ethernet for Plant Automation (Epa)
- IEC/PAS-62411 - Real-Time Ethernet Profinet Io
- IEC/PAS-62412 - Real-Time Ethernet P-Net on IP Specification
- IEC/PAS-62413 - Real-Time Ethernet - Ethernet/IP With Time Synchronization
- IEC/PAS-62419 - Control Technology - Rules for the Designation of Measuring Instruments
- IEC/PAS-62424 - Representation of Process Control Engineering Requests in P&I Diagrams & Data Exchange
- IEC/PAS-62443-3 - Security for industrial process measurement and control - Network and system security
- IEC/PAS-62453-1 - Part 1: Concepts & Detailed Description, Field Device Tool (Fdt) Interface Specificati
- IEC/PAS-62453-2 - Part 2: Interbus Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-3 - Part 3: Profibus Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-4 - Part 4: Hart Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-5 - Part 5: Foundation Fieldbus Communication, Field Device Tool (Fdt) Interface Specifica
- IEC/PAS-62573 - Real-Time Ehternet - Real-Time Automation Protocol for Industrial Ethernet (Rapienet)
- IEC/PAS-62591 - Industrial Communication Networks - Fieldbus Specifications - Wirelesshart Communicat
- IEC/PAS-62601 - Industrial Communication Networks - Fieldbus Specifications - WIA-Pa Communication Ne
- IEC/PAS-62633 - Industrial Communication Networks - Profiles - Additional Fieldbus Profiles for Real-T
- IEC/PAS-62734 - Industrial communication networks - Fieldbus specifications - Wireless systems for industrial automation: process control and related applications
- IEC/PAS-62948 - Industrial networks - Wireless communication network and communication profiles - WIA-FA
- IEC/PAS-62953 - Industrial communication networks - Fieldbus specifications
- IEC/PAS-63131 - System control diagram
- IEC/PAS-63178 - Smart manufacturing service platform - Service-oriented integration requirements of the manufacturing resource/capability
ISO:
- ISO-10303 - Industrial Automation Systems and Integration - Product Data Representation and Exchange,
- ISO-10303-1 - Industrial automation systems and integration - Product data representation and exchange - Part 1: Overview and fundamental principles
- ISO-10303-1001 - Part 1001: Application Module: Appearence Assignmentautomation Systems and Integ
- ISO-10303-1002 - Industrial automation systems and integration - Product data representation and exchange - Part 1002: Application module: Colour
- ISO-10303-1003 - Part 1003: Application Module: Curve Appearance, Industrial Automation Systems and Inte
- ISO-10303-1004 - Part 1004: Application Module: Industrial Automation Systems & Integration - Product D
- ISO-10303-1005 - Part 1005: Application Module: Elemental Topology, Industrial Automation Systems and Integra
- ISO-10303-1006 - Part 1006: Application Module: Industrial Automation Systems and Integration - Product D
- ISO-10303-1007 - Part 1007: Application Module: General Surface Appearance, Industrial Automation Systems &
- ISO-10303-1008 - Industrial automation systems and integration - Product data representation and exchange - Part 1008: Application module: Layer assignment
- ISO-10303-1009 - Part 1009: Application Module: Shape Appearance and Layers - Industrial Automation Systems &
- ISO-10303-101 - Part 101: Integrated Application Resources: Draughting, Industrial Automation Systems & In
- ISO-10303-1010 - Industrial automation systems and integration - Product data representation and exchange - Part 1010: Application module: Date time
- ISO-10303-1011 - Industrial automation systems and integration - Product data representation and exchange - Part 1011: Application module: Person organization
- ISO-10303-1012 - Part 1012: Application Module: Approval, Industrial Automation Systems and Integration -
- ISO-10303-1013 - Part 1013: Application Module: Person Organization Assignemautomation Systems and Integ
- ISO-10303-1014 - Industrial automation systems and integration - Product data representation and exchange - Part 1014: Application module: Date time assignment
- ISO-10303-1015 - Industrial automation systems and integration - Product data representation and exchange - Part 1015: Application module: Security classification
- ISO-10303-1016 - Part 1016: Application Module: Product Categorizationautomation Systems and Integ
- ISO-10303-1017 - Part 1017: Application Module: Product Identificationautomation Systems and Integ
- ISO-10303-1018 - Industrial automation systems and integration - Product data representation and exchange - Part 1018: Application module: Product version
- ISO-10303-1019 - Industrial automation systems and integration - Product data representation and exchange - Part 1019: Application module: Product view definition
- ISO-10303-1020 - Industrial automation systems and integration - Product data representation and exchange - Part 1020: Application module: Product version relationship
- ISO-10303-1021 - Part 1021: Application Module: Identification Assignmentautomation Systems and Integ
- ISO-10303-1022 - Part 1022: Application Module:Part and Version Identificatautomation Systems and Integ
- ISO-10303-1023 - Industrial automation systems and integration - Product data representation and exchange - Part 1023: Application module: Part view definition
- ISO-10303-1024 - Industrial automation systems and integration - Product data representation and exchange - Part 1024: Application module: Product relationship
- ISO-10303-1025 - Part 1025: Application Module: Alias Identificationautomation Systems and Integ
- ISO-10303-1026 - Part 1026: Application Module: Assembly Structure, Industrial Automation Systems and Int
- ISO-10303-1027 - Part 1027: Application Module: Contextual Shape Positioningautomation Systems and Integ
- ISO-10303-1030 - Industrial automation systems and integration - Product data representation and exchange - Part 1030: Application module: Property assignment
- ISO-10303-1032 - Part 1032: Application Module: Shape Property Assignmentautomation Systems and Integ
- ISO-10303-1033 - Industrial automation systems and integration - Product data representation and exchange - Part 1033: Application module: External model
- ISO-10303-1034 - Industrial automation systems and integration - Product data representation and exchange - Part 1034: Application module: Product view definition properties
- ISO-10303-1036 - Industrial automation systems and integration - Product data representation and exchange - Part 1036: Application module: Independent property
- ISO-10303-1038 - Industrial automation systems and integration - Product data representation and exchange - Part 1038: Application module: Independent property representation
- ISO-10303-1039 - Industrial automation systems and integration - Product data representation and exchange - Part 1039: Application module: Geometric validation property representation
- ISO-10303-104 - Industrial automation systems and integration -- Product data representation and exchange -- Part 104: Integrated application resource: Finite element analysis
- ISO-10303-1040 - Industrial automation systems and integration - Product data representation and exchange - Part 1040: Application module: Process property assignment
- ISO-10303-1041 - Industrial automation systems and integration - Product data representation and exchange - Part 1041: Application module: Product view definition relationship
- ISO-10303-1042 - Industrial automation systems and integration - Product data representation and exchange - Part 1042: Application module: Work request
- ISO-10303-1043 - Industrial automation systems and integration - Product data representation and exchange - Part 1043: Application module: Work order
- ISO-10303-1044 - Industrial automation systems and integration - Product data representation and exchange - Part 1044: Application module: Certification
- ISO-10303-1046 - Industrial automation systems and integration - Product data representation and exchange - Part 1046: Application module: Product replacement
- ISO-10303-1047 - Part 1047: Application Module: Activityautomation Systems and Integ
- ISO-10303-1049 - Industrial automation systems and integration - Product data representation and exchange - Part 1049: Application module: Activity method
- ISO-10303-105 - Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics
- ISO-10303-1050 - Part 1050: Dimension Tolerance, Industrial Autometion Systems and Integration - Product
- ISO-10303-1051 - Part 1051: Application Module: Geometric Tolerance, Industrial Automation Systems and In
- ISO-10303-1052 - Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1052: Application Module: Default Tolerance
- ISO-10303-1054 - Industrial automation systems and integration - Product data representation and exchange - Part 1054: Application module: Value with unit
- ISO-10303-1055 - Industrial automation systems and integration - Product data representation and exchange - Part 1055: Application module: Part definition relationship
- ISO-10303-1056 - Part 1056: Application Module: Configuration Itemautomation Systems and Integ
- ISO-10303-1057 - Industrial automation systems and integration - Product data representation and exchange - Part 1057: Application module: Effectivity
- ISO-10303-1058 - Part 1058: Application Module: Configuration Effectivityautomation Systems & Integ
- ISO-10303-1059 - Industrial automation systems and integration - Product data representation and exchange - Part 1059: Application module: Effectivity application
- ISO-10303-1060 - Industrial automation systems and integration - Product data representation and exchange - Part 1060: Application module: Product concept identification
- ISO-10303-1061 - Industrial automation systems and integration - Product data representation and exchange - Part 1061: Application module: Project
- ISO-10303-1062 - Part 1062: Application Module: Contractautomation Systems and Integ
- ISO-10303-1063 - Industrial automation systems and integration - Product data representation and exchange - Part 1063: Application module: Product occurrence
- ISO-10303-1064 - Industrial automation systems and integration - Product data representation and exchange - Part 1064: Application module: Event
- ISO-10303-1065 - Industrial automation systems and integration - Product data representation and exchange - Part 1065: Application module: Time interval
- ISO-10303-1068 - Part 1068: Application Module: Constructive Solid Geometryautomation Systems and Integ
- ISO-10303-107 - Industrial automation systems and integration - Product data representation and exchange - Part 107: Integrated application resource - Finite element analysis definition relationships
- ISO-10303-1070 - Industrial automation systems and integration - Product data representation and exchange - Part 1070: Application module: Class
- ISO-10303-1071 - Industrial automation systems and integration - Product data representation and exchange - Part 1071: Application module: Class of activity
- ISO-10303-1074 - Industrial automation systems and integration - Product data representation and exchange - Part 1074: Application module: Property condition
- ISO-10303-1077 - Industrial automation systems and integration - Product data representation and exchange - Part 1077: Application module: Class of product
- ISO-10303-108 - Industrial automation systems and integration - Product data representation and exchange - Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models
- ISO-10303-1080 - Industrial automation systems and integration - Product data representation and exchange - Part 1080: Application module: Property space
- ISO-10303-1085 - Industrial automation systems and integration - Product data representation and exchange - Part 1085: Application module: Property identification
- ISO-10303-109 - Industrial automation systems and integration - Product data representation and exchange - Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models
- ISO-10303-1091 - Industrial automation systems and integration - Product data representation and exchange - Part 1091: Application module: Maths space
- ISO-10303-1092 - Industrial automation systems and integration - Product data representation and exchange - Part 1092: Application module: Maths value
- ISO-10303-1099 - Industrial automation systems and integration - Product data representation and exchange - Part 1099: Application module: Independent property definition
- ISO-10303-11 - Industrial automation systems and integration - Product data representation and exchange - Part 11: Description methods: The EXPRESS language reference manual
- ISO-10303-1101 - Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1101: Application Module: Product Property Feature Definition
- ISO-10303-1102 - Industrial automation systems and integration - Product data representation and exchange - Part 1102: Application module: Assembly feature definition
- ISO-10303-1103 - Part 1103: Application Module: Product Class, Industrial Automation Systems & Integrat
- ISO-10303-1104 - Industrial automation systems and integration - Product data representation and exchange - Part 1104: Application module: Specified product
- ISO-10303-1105 - Industrial automation systems and integration - Product data representation and exchange - Part 1105: Application module: Multi linguism
- ISO-10303-1106 - Industrial automation systems and integration - Product data representation and exchange - Part 1106: Application module: Extended measure representation
- ISO-10303-1108 - Industrial automation systems and integration - Product data representation and exchange - Part 1108: Application module: Specification based configuration
- ISO-10303-1109 - Industrial automation systems and integration - Product data representation and exchange - Part 1109: Application module: Alternative solution
- ISO-10303-111 - Industrial automation systems and integration - Product data representation and exchange - Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes
- ISO-10303-1110 - Part 1110: Application Module: Surface Conditions, Industrial Automation Systems & Int
- ISO-10303-1111 - Industrial automation systems and integration - Product data representation and exchange - Part 1111: Application module: Classification with attributes
- ISO-10303-1112 - Part 1112: Application Module: Specification Control, Industrial Automation Systems &
- ISO-10303-1113 - Industrial automation systems and integration - Product data representation and exchange - Part 1113: Application module: Group
- ISO-10303-1114 - Industrial automation systems and integration - Product data representation and exchange - Part 1114: Application module: Classification assignment
- ISO-10303-1115 - Part 1115: Application Module: Part Collection, Industrial Automation Systems & Integr
- ISO-10303-1116 - Part 1116: Application Module: Pdm Material Aspects, Industrial Automation Systems & I
- ISO-10303-1118 - Industrial automation systems and integration - Product data representation and exchange - Part 1118: Application module: Measure representation
- ISO-10303-112 - Industrial automation systems and integration - Product data representation and exchange - Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models
- ISO-10303-1121 - Part 1121: Application Module: Document and Version Identifautomation Systems & Integ
- ISO-10303-1122 - Industrial automation systems and integration - Product data representation and exchange - Part 1122: Application module: Document assignment
- ISO-10303-1123 - Industrial automation systems and integration - Product data representation and exchange - Part 1123: Application module: Document definition
- ISO-10303-1124 - Industrial automation systems and integration - Product data representation and exchange - Part 1124: Application module: Document structure
- ISO-10303-1126 - Part 1126: Application Module: Document Properties, Industrial Automation Systems & In
- ISO-10303-1127 - Industrial automation systems and integration - Product data representation and exchange - Part 1127: Application module: File identification
- ISO-10303-1128 - Industrial automation systems and integration - Product data representation and exchange - Part 1128: Application module: External item identification assignment
- ISO-10303-1129 - Part 1129: Application Module: External Properties, Industrial Automation Systems & In
- ISO-10303-113 - Industrial automation systems and integration - Product data representation and exchange - Part 113: Integrated application resource: Mechanical features
- ISO-10303-1130 - Industrial automation systems and integration - Product data representation and exchange - Part 1130: Application module: Derived shape element
- ISO-10303-1131 - Industrial automation systems and integration - Product data representation and exchange - Part 1131: Application module: Construction geometry
- ISO-10303-1132 - Part 1132: Application Module: Associative Textautomation Systems & Integ
- ISO-10303-1133 - Part 1133: Application Module: Singlepart Representationautomation Systems & Integ
- ISO-10303-1134 - Industrial automation systems and integration - Product data representation and exchange - Part 1134: Application module: Product structure
- ISO-10303-1136 - Industrial automation systems and integration - Product data representation and exchange - Part 1136: Application module: Text appearance
- ISO-10303-1140 - Part 1140: Application Module: Requirement Identification Aautomation Systems & Integ
- ISO-10303-1141 - Part 1141: Requirement View Definition, Industrial Automation Systems and Integration -
- ISO-10303-1142 - Part 1142: Application Module: Requirement View Definitionautomation Systems & Integ
- ISO-10303-1143 - Industrial automation systems and integration - Product data representation and exchange - Part 1143: Application module: Building component
- ISO-10303-1144 - Industrial automation systems and integration - Product data representation and exchange - Part 1144: Application module: Building item
- ISO-10303-1145 - Industrial automation systems and integration - Product data representation and exchange - Part 1145: Application module: Building structure
- ISO-10303-1146 - Industrial automation systems and integration - Product data representation and exchange - Part 1146: Application module: Location in building
- ISO-10303-1147 - Industrial automation systems and integration - Product data representation and exchange - Part 1147: Application module: Manufacturing configuration effectivity
- ISO-10303-1151 - Industrial automation systems and integration - Product data representation and exchange - Part 1151: Application module: Functional data
- ISO-10303-1156 - Industrial automation systems and integration - Product data representation and exchange - Part 1156: Application module: Product structure and classification
- ISO-10303-1157 - Industrial automation systems and integration - Product data representation and exchange - Part 1157: Application module: Class of product structure
- ISO-10303-1158 - Industrial automation systems and integration - Product data representation and exchange - Part 1158: Application module: Class of composition of product
- ISO-10303-1159 - Industrial automation systems and integration - Product data representation and exchange - Part 1159: Application module: Class of connection of product
- ISO-10303-1160 - Industrial automation systems and integration - Product data representation and exchange - Part 1160: Application module: Class of containment of product
- ISO-10303-1161 - Industrial automation systems and integration - Product data representation and exchange - Part 1161: Application module: Class of involvement of product in connection
- ISO-10303-1162 - Industrial automation systems and integration - Product data representation and exchange - Part 1162: Application module: Class of product library
- ISO-10303-1163 - Industrial automation systems and integration - Product data representation and exchange - Part 1163: Application module: Individual product structure
- ISO-10303-1164 - Part 1164: Application Module: Product as Individualautomation Systems & Integ
- ISO-10303-1165 - Industrial automation systems and integration - Product data representation and exchange - Part 1165: Application module: Involvement of individual product in connection
- ISO-10303-1166 - Industrial automation systems and integration - Product data representation and exchange - Part 1166: Application module: Composition of individual product
- ISO-10303-1167 - Industrial automation systems and integration - Product data representation and exchange - Part 1167: Application module: Connection of individual product
- ISO-10303-1168 - Industrial automation systems and integration - Product data representation and exchange - Part 1168: Application module: Containment of individual product
- ISO-10303-1169 - Industrial automation systems and integration - Product data representation and exchange - Part 1169: Application module: Activity structure and classification
- ISO-10303-1170 - Industrial automation systems and integration - Product data representation and exchange - Part 1170: Application module: Class of activity structure
- ISO-10303-1171 - Industrial automation systems and integration - Product data representation and exchange - Part 1171: Application module: Class of composition of activity
- ISO-10303-1172 - Industrial automation systems and integration - Product data representation and exchange - Part 1172: Application module: Class of connection of activity
- ISO-10303-1173 - Industrial automation systems and integration - Product data representation and exchange - Part 1173: Application module: Class of involvement in activity
- ISO-10303-1174 - Industrial automation systems and integration - Product data representation and exchange - Part 1174: Application module: Class of activity library
- ISO-10303-1175 - Industrial automation systems and integration - Product data representation and exchange - Part 1175: Application module: Individual activity structure
- ISO-10303-1176 - Industrial automation systems and integration - Product data representation and exchange - Part 1176: Application module: Individual activity
- ISO-10303-1177 - Industrial automation systems and integration - Product data representation and exchange - Part 1177: Application module: Composition of individual activity
- ISO-10303-1178 - Industrial automation systems and integration - Product data representation and exchange - Part 1178: Application module: Connection of individual activity
- ISO-10303-1179 - Industrial automation systems and integration - Product data representation and exchange - Part 1179: Application module: Individual involvement in activity
- ISO-10303-1188 - Industrial automation systems and integration - Product data representation and exchange - Part 1188: Application module: Class of person
- ISO-10303-1198 - Industrial automation systems and integration - Product data representation and exchange - Part 1198: Application module: Property and property assignment
- ISO-10303-1199 - Industrial automation systems and integration - Product data representation and exchange - Part 1199: Application module: Possession of property
- ISO-10303-1203 - Industrial automation systems and integration - Product data representation and exchange - Part 1203: Application module: Schematic and symbolization
- ISO-10303-1204 - Industrial automation systems and integration - Product data representation and exchange - Part 1204: Application module: Schematic drawing
- ISO-10303-1205 - Industrial automation systems and integration - Product data representation and exchange - Part 1205: Application module: Schematic element
- ISO-10303-1206 - Industrial automation systems and integration - Product data representation and exchange - Part 1206: Application module: Draughting annotation
- ISO-10303-1207 - Industrial automation systems and integration - Product data representation and exchange - Part 1207: Application module: Drawing structure and administration
- ISO-10303-1208 - Industrial automation systems and integration - Product data representation and exchange - Part 1208: Application module: Schematic element library
- ISO-10303-1209 - Industrial automation systems and integration - Product data representation and exchange - Part 1209: Application module: Symbolization by schematic element
- ISO-10303-1210 - Industrial automation systems and integration - Product data representation and exchange - Part 1210: Application module: Set theory
- ISO-10303-1211 - Industrial automation systems and integration - Product data representation and exchange - Part 1211: Application module: Cardinality of relationship
- ISO-10303-1212 - Industrial automation systems and integration - Product data representation and exchange - Part 1212: Application module: Classification
- ISO-10303-1213 - Industrial automation systems and integration - Product data representation and exchange - Part 1213: Application module: Reference data library
- ISO-10303-1214 - Industrial automation systems and integration - Product data representation and exchange - Part 1214: Application module: System breakdown
- ISO-10303-1215 - Industrial automation systems and integration - Product data representation and exchange - Part 1215: Application module: Physical breakdown
- ISO-10303-1216 - Industrial automation systems and integration - Product data representation and exchange - Part 1216: Application module: Functional breakdown
- ISO-10303-1217 - Industrial automation systems and integration - Product data representation and exchange - Part 1217: Application module: Zonal breakdown
- ISO-10303-1218 - Industrial automation systems and integration - Product data representation and exchange - Part 1218: Application module: Hybrid breakdown
- ISO-10303-1228 - Industrial automation systems and integration - Product data representation and exchange - Part 1228: Application module: Representation with uncertainty
- ISO-10303-1230 - Industrial automation systems and integration - Product data representation and exchange - Part 1230: Application module: Configuration controlled 3D parts and assemblies
- ISO-10303-1231 - Part 1231: Application Module: Product Data Management, Industrial Automation Systems
- ISO-10303-1233 - Part 1233: Application Module: Requirement Assignment Automation Systems & Inte
- ISO-10303-1240 - Industrial automation systems and integration - Product data representation and exchange - Part 1240: Application module: Organization type
- ISO-10303-1241 - Part 1241: Application Module: Information Rightsautomation Systems & Integ
- ISO-10303-1242 - Industrial automation systems and integration - Product data representation and exchange - Part 1242: Application module: Position in organization
- ISO-10303-1243 - Industrial automation systems and integration - Product data representation and exchange - Part 1243: Application module: Experience
- ISO-10303-1244 - Industrial automation systems and integration - Product data representation and exchange - Part 1244: Application module: Qualifications
- ISO-10303-1245 - Industrial automation systems and integration - Product data representation and exchange - Part 1245: Application module: Type of person
- ISO-10303-1246 - Industrial automation systems and integration - Product data representation and exchange - Part 1246: Application module: Attribute classification
- ISO-10303-1248 - Industrial automation systems and integration - Product data representation and exchange - Part 1248: Application module: Product breakdown
- ISO-10303-1249 - Industrial automation systems and integration - Product data representation and exchange - Part 1249: Application module: Activity method assignment
- ISO-10303-1250 - Industrial automation systems and integration - Product data representation and exchange - Part 1250: Application module: Attachment slot
- ISO-10303-1251 - Part 1251: Application Module: Interfaceautomation Systems & Integ
- ISO-10303-1252 - Part 1252: Application Module: Probabilityautomation Systems & Integ
- ISO-10303-1253 - Industrial automation systems and integration - Product data representation and exchange - Part 1253: Application module: Condition
- ISO-10303-1254 - Industrial automation systems and integration - Product data representation and exchange - Part 1254: Application module: Condition evaluation
- ISO-10303-1255 - Part 1255: Application Module: State Definitionautomation Systems & Integ
- ISO-10303-1256 - Part 1256: Application Module: State Observedautomation Systems & Integ
- ISO-10303-1257 - Industrial automation systems and integration - Product data representation and exchange - Part 1257: Application module: Condition characterized
- ISO-10303-1258 - Part 1258: Application Module: Observationautomation Systems & Integ
- ISO-10303-1259 - Part 1259: Application Module: Activity as Realizedautomation Systems & Integ
- ISO-10303-1260 - Industrial automation systems and integration - Product data representation and exchange - Part 1260: Application module: Scheme
- ISO-10303-1261 - Industrial automation systems and integration - Product data representation and exchange - Part 1261: Application module: Activity method implementation
- ISO-10303-1262 - Part 1262: Application Module: Task Specificationautomation Systems & Integ
- ISO-10303-1263 - Part 1263: Application Module: Justificationautomation Systems & Integ
- ISO-10303-1265 - Industrial automation systems and integration - Product data representation and exchange - Part 1265: Application module: Envelope
- ISO-10303-1266 - Part 1266: Application Module: Resource Managementautomation Systems & Integ
- ISO-10303-1267 - Part 1267: Application Module: Required Resourceautomation Systems & Integ
- ISO-10303-1268 - Part 1268: Application Module: Resource Itemautomation Systems & Integ
- ISO-10303-1269 - Part 1269: Application Module: Resource as Realizedautomation Systems & Integ
- ISO-10303-1270 - Part 1270: Application Module: Messageautomation Systems & Integ
- ISO-10303-1271 - Part 1271: Application Module: State Characterizedautomation Systems & Integ
- ISO-10303-1272 - Industrial automation systems and integration - Product data representation and exchange - Part 1272: Application module: Activity characterized
- ISO-10303-1273 - Industrial automation systems and integration - Product data representation and exchange - Part 1273: Application module: Resource property assignment
- ISO-10303-1274 - Part 1274: Application Module: Probability Distributionautomation Systems & Integ
- ISO-10303-1275 - Industrial automation systems and integration - Product data representation and exchange - Part 1275: Application module: External class
- ISO-10303-1276 - Industrial automation systems and integration - Product data representation and exchange - Part 1276: Application module: Location
- ISO-10303-1277 - Industrial automation systems and integration - Product data representation and exchange - Part 1277: Application module: Location assignment
- ISO-10303-1278 - Industrial automation systems and integration - Product data representation and exchange - Part 1278: Application module: Product group
- ISO-10303-1280 - Part 1280: Application Module: Required Resource Characteriautomation Systems & Integ
- ISO-10303-1281 - Part 1281: Application Module: Resource Item Characterizedautomation Systems & Integ
- ISO-10303-1282 - Part 1282: Application Module: Resource Management Characteautomation Systems & Integ
- ISO-10303-1283 - Part 1283: Application Module: Resource as Realized Charactautomation Systems & Integ
- ISO-10303-1285 - Industrial automation systems and integration - Product data representation and exchange - Part 1285: Application module: Work request characterized
- ISO-10303-1286 - Industrial automation systems and integration - Product data representation and exchange - Part 1286: Application module: Work order characterized
- ISO-10303-1287 - Part 1287: Application Module: Ap239 Activity Recording, Industrial Automation Systems
- ISO-10303-1288 - Industrial automation systems and integration - Product data representation and exchange - Part 1288: Application module: Management resource information
- ISO-10303-1289 - Part 1289: Application Module: Ap239 Management Resource Inautomation Systems & Integ
- ISO-10303-1290 - Part 1290: Application Module: Document Managementautomation Systems & Integ
- ISO-10303-1291 - Industrial automation systems and integration - Product data representation and exchange - Part 1291: Application module: Plib class reference
- ISO-10303-1292 - Part 1292: Ap239 Product Definition Information, Industrialautomation Systems & Integ
- ISO-10303-1293 - Part 1293: Ap239 Part Definition Information, Industrial Automation Systems & Integrat
- ISO-10303-1294 - Industrial automation systems and integration - Product data representation and exchange - Part 1294: Application module: Application module: Interface lifecycle
- ISO-10303-1295 - Industrial automation systems and integration - Product data representation and exchange - Part 1295: Application module: AP239 properties
- ISO-10303-1296 - Industrial automation systems and integration - Product data representation and exchange - Part 1296: Application module: Condition evaluation characterized
- ISO-10303-1297 - Part 1297: Application Module: Ap239 Document Managementautomation Systems & Integ
- ISO-10303-1298 - Industrial automation systems and integration - Product data representation and exchange - Part 1298: Application module: Activity method characterized
- ISO-10303-1300 - Industrial automation systems and integration - Product data representation and exchange - Part 1300: Application module: Work output
- ISO-10303-1301 - Industrial automation systems and integration - Product data representation and exchange - Part 1301: Application module: Work output characterized
- ISO-10303-1304 - Industrial automation systems and integration - Product data representation and exchange - Part 1304: Application module: AP239 product status recording
- ISO-10303-1306 - Part 1306: Application Module: Ap239 Task Specification Resourced, Industrial Automati
- ISO-10303-1307 - Part 1307: Application Module: Ap239 Work Definition, Industrial Automation Systems &
- ISO-10303-1313 - Industrial automation systems and integration - Product data representation and exchange - Part 1313: Application module: Mechanical design geometric presentation
- ISO-10303-1314 - Industrial automation systems and integration - Product data representation and exchange - Part 1314: Application module: Mechanical design shaded presentation
- ISO-10303-1317 - Industrial automation systems and integration - Product data representation and exchange - Part 1317: Application module: Procedural shape model
- ISO-10303-1318 - Industrial automation systems and integration - Product data representation and exchange - Part 1318: Application module: Procedural solid model
- ISO-10303-1319 - Industrial automation systems and integration - Product data representation and exchange - Part 1319: Application module: Solid with local modification
- ISO-10303-1320 - Industrial automation systems and integration - Product data representation and exchange - Part 1320: Application module: Thickened face solid
- ISO-10303-1321 - Industrial automation systems and integration - Product data representation and exchange - Part 1321: Application module: Swept solid
- ISO-10303-1322 - Industrial automation systems and integration - Product data representation and exchange - Part 1322: Application module: Modified swept solid
- ISO-10303-1324 - Industrial automation systems and integration - Product data representation and exchange - Part 1324: Application module: Non manifold surface
- ISO-10303-1329 - Industrial automation systems and integration - Product data representation and exchange - Part 1329: Application module: Elementary boundary representation
- ISO-10303-1330 - Industrial automation systems and integration - Product data representation and exchange - Part 1330: Application module: Presentation hierarchy
- ISO-10303-1331 - Industrial automation systems and integration - Product data representation and exchange - Part 1331: Application module: External source
- ISO-10303-1340 - Industrial automation systems and integration - Product data representation and exchange - Part 1340: Application module: Name assignment
- ISO-10303-1341 - Industrial automation systems and integration - Product data representation and exchange - Part 1341: Application module: Generic expression
- ISO-10303-1342 - Part 1342: Application Module: Expression, Industrial Automation Systems & Integration
- ISO-10303-1343 - Part 1343: Application Module: Product Placement, Industrial Automation Systems & Inte
- ISO-10303-1344 - Industrial automation systems and integration - Product data representation and exchange - Part 1344: Application module: Numerical interface
- ISO-10303-1345 - Part 1345: Application Module: Item Definition Structure, Industrial Automation System
- ISO-10303-1346 - Industrial automation systems and integration - Product data representation and exchange - Part 1346: Application module: Numeric function
- ISO-10303-1347 - Industrial automation systems and integration - Product data representation and exchange - Part 1347: Application module: Wireframe 2d
- ISO-10303-1348 - Part 1348: Application Module: Requirement Managementautomation Systems & Integ
- ISO-10303-1349 - Industrial automation systems and integration - Product data representation and exchange - Part 1349: Application module: Incomplete data reference mechanism
- ISO-10303-1350 - Industrial automation systems and integration - Product data representation and exchange - Part 1350: Application module: Inertia characteristics
- ISO-10303-1351 - Part 1351: Application Module: Catalog Data Information, Industrial Automation Systems
- ISO-10303-1352 - Industrial automation systems and integration - Product data representation and exchange - Part 1352: Application module: Catalog data information and shape representation
- ISO-10303-1353 - Industrial automation systems and integration - Product data representation and exchange - Part 1353: Application module: Parameterized catalog data information
- ISO-10303-1354 - Industrial automation systems and integration - Product data representation and exchange - Part 1354: Application module: Furniture interior decoration
- ISO-10303-1355 - Industrial automation systems and integration - Product data representation and exchange - Part 1355: Application module: Parameterized catalog data and shape representation
- ISO-10303-1357 - Industrial automation systems and integration - Product data representation and exchange - Part 1357: Application module: Selected item
- ISO-10303-1358 - Industrial automation systems and integration - Product data representation and exchange - Part 1358: Application module: Location assignment characterized
- ISO-10303-1362 - Industrial automation systems and integration - Product data representation and exchange - Part 1362: Application module: Dimension and tolerance callouts
- ISO-10303-1364 - Industrial automation systems and integration - Product data representation and exchange - Part 1364: Application module: Event assignment
- ISO-10303-1365 - Industrial automation systems and integration - Product data representation and exchange - Part 1365: Application module: Time interval assignment
- ISO-10303-1366 - Industrial automation systems and integration - Product data representation and exchange - Part 1366: Application module: Tagged text representation
- ISO-10303-1369 - Industrial automation systems and integration - Product data representation and exchange - Part 1369: Application module: Binary representation
- ISO-10303-14 - Industrial automation systems and integration - Product data representation and exchange - Part 14: Description methods: The EXPRESS-X language reference manual
- ISO-10303-142 - Industrial automation systems and integration - Product data representation and exchange - Part 1342: Application module: Expression
- ISO-10303-1467 - Industrial automation systems and integration -- Product data representation and exchange -- Part 1467: Risk management
- ISO-10303-15 - Industrial automation systems and integration - Product data representation and exchange - Part 15: Description methods: SysML XMI to XSD transformation
- ISO-10303-1501 - Industrial automation systems and integration - Product data representation and exchange - Part 1501: Application module: Edge based wireframe
- ISO-10303-1502 - Industrial automation systems and integration - Product data representation and exchange - Part 1502: Application module: Shell based wireframe
- ISO-10303-1507 - Industrial automation systems and integration - Product data representation and exchange - Part 1507: Application module: Geometrically bounded surface
- ISO-10303-1509 - Part 1509: Application Module: Manifold Surfaceautomation Systems & Integ
- ISO-10303-1510 - Industrial automation systems and integration - Product data representation and exchange - Part 1510: Application module: Geometrically bounded wireframe
- ISO-10303-1511 - Industrial automation systems and integration - Product data representation and exchange - Part 1511: Application module: Topologically bounded surface
- ISO-10303-1512 - Industrial automation systems and integration - Product data representation and exchange - Part 1512: Application module: Faceted boundary representation
- ISO-10303-1514 - Part 1514: Application Module: Advanced Boundary Representaautomation Systems & Integ
- ISO-10303-16 - Industrial automation systems and integration - Product data representation and exchange - Part 16: Description methods: SysML XMI to EXPRESS transformation
- ISO-10303-1601 - Part 1601: Application Module: Altered Package, Industrial Automation Systems & Integr
- ISO-10303-1602 - Industrial automation systems and integration - Product data representation and exchange - Part 1602: Application module: Altered part
- ISO-10303-1603 - Part 1603: Application Module: Analytical Model, Industrialautomation Systems & Integ
- ISO-10303-1604 - Industrial automation systems and integration - Product data representation and exchange - Part 1604: Application module: AP210 assembly functional interface requirements
- ISO-10303-1605 - Industrial automation systems and integration - Product data representation and exchange - Part 1605: Application module: AP210 assembly functional requirements
- ISO-10303-1606 - Industrial automation systems and integration - Product data representation and exchange - Part 1606: Application module: AP210 assembly physical design
- ISO-10303-1607 - Industrial automation systems and integration - Product data representation and exchange - Part 1607: Application module: AP210 assembly physical interface requirements
- ISO-10303-1608 - Industrial automation systems and integration - Product data representation and exchange - Part 1608: Application module: AP210 assembly physical requirements
- ISO-10303-1609 - Industrial automation systems and integration - Product data representation and exchange - Part 1609: Application module: AP210 assembly requirement allocation
- ISO-10303-1610 - Industrial automation systems and integration - Product data representation and exchange - Part 1610: Application module: AP210 assembly technology constraints
- ISO-10303-1611 - Industrial automation systems and integration - Product data representation and exchange - Part 1611: Application module: AP210 connection zone based model extraction
- ISO-10303-1612 - Industrial automation systems and integration - Product data representation and exchange - Part 1612: Application module: AP210 device functional and physical characterization
- ISO-10303-1613 - Part 1613: Physical Unit Non Planar Design View, Industrialautomation Systems & Integ
- ISO-10303-1614 - Industrial automation systems and integration - Product data representation and exchange - Part 1614: Application module: AP210 functional decomposition
- ISO-10303-1615 - Industrial automation systems and integration - Product data representation and exchange - Part 1615: Application module: AP210 functional requirement allocation
- ISO-10303-1616 - Industrial automation systems and integration - Product data representation and exchange - Part 1616: Application module: AP210 functional specification
- ISO-10303-1617 - Industrial automation systems and integration - Product data representation and exchange - Part 1617: Application module: AP210 interconnect design
- ISO-10303-1618 - Industrial automation systems and integration - Product data representation and exchange - Part 1618: Application module: AP210 interconnect design for microwave
- ISO-10303-1619 - Industrial automation systems and integration - Product data representation and exchange - Part 1619: Application module: AP210 interconnect functional requirements
- ISO-10303-1620 - Industrial automation systems and integration - Product data representation and exchange - Part 1620: Application module: AP210 interconnect physical requirements
- ISO-10303-1621 - Industrial automation systems and integration - Product data representation and exchange - Part 1621: Application module: AP210 interconnect requirement allocation
- ISO-10303-1622 - Industrial automation systems and integration - Product data representation and exchange - Part 1622: Application module: AP210 interconnect technology constraints
- ISO-10303-1623 - Industrial automation systems and integration - Product data representation and exchange - Part 1623: Application module: AP210 laminate assembly design
- ISO-10303-1624 - Industrial automation systems and integration - Product data representation and exchange - Part 1624: Application module: AP210 package functional and physical characterization
- ISO-10303-1625 - Industrial automation systems and integration - Product data representation and exchange - Part 1625: Application module: AP210 packaged part white box model
- ISO-10303-1626 - Industrial automation systems and integration - Product data representation and exchange - Part 1626: Application module: AP210 physical unit physical characterization
- ISO-10303-1627 - Industrial automation systems and integration - Product data representation and exchange - Part 1627: Application module: AP210 printed part functional and physical characterization
- ISO-10303-1628 - Part 1628: Application Module: Design Product Data Management, Industrial Automation S
- ISO-10303-1630 - Industrial automation systems and integration - Product data representation and exchange - Part 1630: Application module: AP210 product rule
- ISO-10303-1631 - Part 1631: Application Module: Area 2D, Industrial Automation Systems & Integration -
- ISO-10303-1632 - Part 1632: Application Module: Assembly 2D Shape, Industrial Automation 2D Shape, Indu
- ISO-10303-1633 - Part 1633: Application Module: Assembly 3D Shape, Industrial Automation Systems & Inte
- ISO-10303-1634 - Part 1634: Assembly Component Placement Requirements, Industrial Automation Systems &
- ISO-10303-1635 - Part 1635: Application Module: Assembly Functional Interface Requirement, Industrial A
- ISO-10303-1636 - Part 1636: Application Module: Assembly Module Design, Industrial Automation Systems &
- ISO-10303-1637 - Part 1637: Application Module: Assembly Module Macro Definition, Industrial Automation
- ISO-10303-1638 - Part 1638: Application Module: Assembly Module With Cable Component 2D, Industrial Aut
- ISO-10303-1639 - Part 1639: Application Module: Assembly Module With Cable Component 3D, Industrial Aut
- ISO-10303-1640 - Part 1640: Application Module: Assembly Module With Macro Component, Industrial Automa
- ISO-10303-1641 - Part 1641: Application Module: Assembly Module With Subassembly, Industrial Automation
- ISO-10303-1642 - Part 1642: Application Module: Assembly Module Usage View, Industrial Automation Syste
- ISO-10303-1643 - Part 1643: Application Module: Assembly Module With Interconnect Component, Industrial
- ISO-10303-1644 - Part 1644: Application Module: Assembly Module With Cable Component, Industrial Automa
- ISO-10303-1645 - Part 1645: Application Module: Assembly Module With Packaged Connector Component, Indu
- ISO-10303-1646 - Part 1646: Footprint Definition, Industrial Automation Systems & Integration - Product
- ISO-10303-1647 - Part 1647: Application Module: Assembly Physical Interface Requirement, Industrial Aut
- ISO-10303-1648 - Part 1648: Application Module: Assembly Physical Requirement Allocation, Industrial Au
- ISO-10303-1649 - Part 1649: Application Module: Assembly Technology, Industral Automation Systems & Int
- ISO-10303-1650 - Part 1650: Application Module: Bare Die, Industrial Automation Systems & Integration -
- ISO-10303-1651 - Part 1651: Basic Curve, Industrial Automation Systems & Integration - Product Data Rep
- ISO-10303-1652 - Part 1652: Application Module: Basic Geometry, Industrial Automation Systems & Integra
- ISO-10303-1653 - Part 1653: Application Module: Cable, Industrial Automationsystems & Integration - Pr
- ISO-10303-1654 - Part 1654: Application Module: Characteristic, Industrial Automation Systems & Integra
- ISO-10303-1655 - Part 1655: Application Module: Chemical Substance, Industrial Automation Systems & Int
- ISO-10303-1656 - Part 1656: Component Grouping, Industrial Automation Systems & Integration - Product D
- ISO-10303-1657 - Part 1657: Application Module: Component Feature, Industrial Automation Systems & Inte
- ISO-10303-1658 - Industrial automation systems and integration - Product data representation and exchange - Part 1658: Application module: Connectivity allocation to physical network
- ISO-10303-1659 - Industrial automation systems and integration - Product data representation and exchange - Part 1659: Application module: Curve swept solid
- ISO-10303-1660 - Part 1660: Application Module: Datum Difference Based Model, Industrial Automation Sys
- ISO-10303-1661 - Industrial automation systems and integration - Product data representation and exchange - Part 1661: Application module: Design management
- ISO-10303-1662 - Part 1662: Application Module: Design Specific Assignment To Assembly Usage View, Indu
- ISO-10303-1663 - Part 1663: Application Module: Design Specific Assignment To Interconnect Usage View,
- ISO-10303-1664 - Part 1664: Application Module: Device Marking, Industrial Automation Systems & Integra
- ISO-10303-1665 - Industrial automation systems and integration - Product data representation and exchange - Part 1665: Applciation module: Electrical network definition
- ISO-10303-1666 - Part 1666: Application Module: Extended Geometric Tolerance, Industrial Automation Sys
- ISO-10303-1667 - Part 1667: Application Module: Extended Basic Geometry, Industrial Automation Systems
- ISO-10303-1668 - Part 1668: Fabrication Joint, Industrial Automation Systems& Integration - Product Da
- ISO-10303-1669 - Part 1669: Application Module: Fabrication Requirement, Industrial Automation Systems
- ISO-10303-1670 - Part 1670: Application Module: Fabrication Technology, Industrial Automation Systems &
- ISO-10303-1671 - Part 1671: Feature & Connection Zone, Industrial Automationsystems & Integration -
- ISO-10303-1672 - Part 1672: Application Module: Fill Area Style, Industrial Automation Systems & Integr
- ISO-10303-1673 - Industrial automation systems and integration - Product data representation and exchange - Part 1673: Application module: Edge shape feature
- ISO-10303-1674 - Part 1674: Application Module: Functional Assignment To Part, Industrial Automation Sy
- ISO-10303-1675 - Industrial automation systems and integration - Product data representation and exchange - Part 1675: Application module: Functional decomposition to assembly design
- ISO-10303-1676 - Part 1676: Application Module: Functional Decomposition To Design, Industrial Automati
- ISO-10303-1677 - Industrial automation systems and integration - Product data representation and exchange - Part 1677: Application module: Functional decomposition to interconnect design
- ISO-10303-1678 - Industrial automation systems and integration - Product data representation and exchange - Part 1678: Application module: Functional decomposition with nodal representation to packaged mapping
- ISO-10303-1679 - Part 1679: Application Module: Functional Specification, Industrial Automation Systems
- ISO-10303-1680 - Industrial automation systems and integration - Product data representation and exchange - Part 1680: Application module: Functional unit requirement allocation
- ISO-10303-1681 - Industrial automation systems and integration - Product data representation and exchange - Part 1681: Application module: Generic material aspects
- ISO-10303-1682 - Part 1682: Interconnect 2D Shape, Industrial Automation Systems & Integration - Produc
- ISO-10303-1684 - Part 1684: Application Module: Interconnect Module Connection Routing, Industrial Auto
- ISO-10303-1685 - Part 1685: Application Module: Interconnect Module To Assembly Module Relationship, In
- ISO-10303-1686 - Part 1686: Application Module: Interconnect Module Usage View, Industrial Automation S
- ISO-10303-1687 - Part 1687: Application Module: Interconnect Module With Macros, Industrial Automation
- ISO-10303-1688 - Part 1688: Application Module: Interconnect Non Planar Shape, Industrial Automation Sy
- ISO-10303-1689 - Part 1689: Interconnect Physical Requirement Allocation, Industrial Automation System
- ISO-10303-1690 - Part 1690: Application Module: Interconnect Placement Requirements, Industrial Automat
- ISO-10303-1691 - Part 1691: Application Module: Interface Component, Industrial Automation Systems & In
- ISO-10303-1692 - Part 1692: Land, Industrial Automation Systems & Integration - Product Data Representa
- ISO-10303-1693 - Part 1693: Application Module: Layered 2D Shape, Industrialautomation Systems & Integ
- ISO-10303-1694 - Part 1694: Application Module: Layered 3D Shape, Industrialautomation Systems & Integ
- ISO-10303-1695 - Part 1695: Application Module: Layered Interconnect Module 2D Design, Industrial Autom
- ISO-10303-1696 - Part 1696: Layered Interconnect Module 3D Design, Industrial Automation Systems & Inte
- ISO-10303-1698 - Part 1698: Application Module: Layered Interconnect Module Design, Industrial Automati
- ISO-10303-17 - Industrial automation systems and integration - Product data representation and exchange - Part 17: Description methods: EXPRESS to SysML CXMI transformation
- ISO-10303-1700 - Part 1700: Layered Interconnect Module With Printed Component Design, Industrial Autom
- ISO-10303-1701 - Part 1701: Application Module: Layout Macro Definition, Industrial Automation Systems
- ISO-10303-1702 - Industrial automation systems and integration - Product data representation and exchange - Part 1702: Application module: Manifold subsurface
- ISO-10303-1703 - Part 1703: Model Parameter, Industrial Automation Systems &Integration - Product Data
- ISO-10303-1704 - Part 1704: Application Module: Network Functional Design View, Industrial Automation S
- ISO-10303-1705 - Part 1705: Functional Usage View, Industrial Automation Systems & Integration - Produc
- ISO-10303-1706 - Part 1706: Application Module: Non Feature Shape Element, Industrial Automation System
- ISO-10303-1707 - Part 1707: Package, Industrial Automation Systems & Integration - Product Data Represe
- ISO-10303-1708 - Part 1708: Application Module: Packaged Connector Model, Industrial Automation Systems
- ISO-10303-1709 - Part 1709: Application Module: Packaged Part White Box Model, Industrial Automation Sy
- ISO-10303-1710 - Part 1710: Application Module: Packaged Part Black Box Model, Industrial Automation Sy
- ISO-10303-1711 - Part 1711: Application Module: Part External Reference, Industrial Automation Systems
- ISO-10303-1712 - Part 1712: Application Module: Part Feature Function, Industrial Automation Systems &
- ISO-10303-1713 - Part 1713: Part Feature Grouping, Industrial Automation Systems & Integration - Produc
- ISO-10303-1714 - Part 1714: Part Feature Location Related Publications, Industrial Automation Systems &
- ISO-10303-1715 - Industrial automation systems and integration - Product data representation and exchange - Part 1715: Application module: Part occurrence
- ISO-10303-1716 - Part 1716: Layered Interconnect Complex Template, Industrial Automation Systems & Inte
- ISO-10303-1717 - Part 1717: Application Module: Part Template 3D Shape, Industrial Automation Systems &
- ISO-10303-1718 - Part 1718: Layered Interconnect Simple Template, Industrialautomation Systems & Integ
- ISO-10303-1719 - Part 1719: Application Module: Part Template Non Planar Shape, Industrial Automation S
- ISO-10303-1720 - Part 1720: Part Template Shape With Parameters, Industrial Automation Systems & Inte
- ISO-10303-1721 - Part 1721: Application Module: Physical Component Feature, Industrial Automation Syste
- ISO-10303-1722 - Part 1722: Application Module: Part Template, Industrial Automation Systems & Integrat
- ISO-10303-1723 - Part 1723: Application Module: Physical Node Requirement Toimplementing Component All
- ISO-10303-1724 - Part 1724: Physical Unit 2D Design View, Industrial Automation Systems & Integration -
- ISO-10303-1725 - Part 1725: Physical Unit 3D Design View, Industrial Automation Systems & Integration -
- ISO-10303-1726 - Part 1726: Application Module: Physical Unit 2D Shape, Industrial Automation Systems &
- ISO-10303-1727 - Part 1727: Application Module: Physical Unit 3D Shape, Industrial Automation Systems &
- ISO-10303-1728 - Part 1728: Physical Unit Design View, Industrial Automationsystems & Integration - Pr
- ISO-10303-1729 - Part 1729: Application Module: Physical Unit Interconnect Definition, Industrial Autom
- ISO-10303-1730 - Part 1730: Physical Unit Shape With Parameters, Industrial Automation Systems & Integr
- ISO-10303-1731 - Part 1731: Constructive Solid Geometry 2D, Industrial Automation Systems & Integration
- ISO-10303-1732 - Part 1732: Physical Unit Usage View, Industrial Automation Systems & Integration
- ISO-10303-1733 - Industrial automation systems and integration - Product data representation and exchange - Part 1733: Application module: Planned characteristic
- ISO-10303-1734 - Part 1734: Application Module: Pre Defined Datum Symbol, Industrial Automation System
- ISO-10303-1735 - Part 1735: Application Module: Pre Defined Datum 2D Symbol,Industrial Automation Syst
- ISO-10303-1736 - Part 1736: Application Module: Pre Defined Datum 3D Symbol,Industrial Automation Syst
- ISO-10303-1737 - Part 1737: Printed Physical Layout Template, Industrial Automation Systems & Integrati
- ISO-10303-1738 - Industrial automation systems and integration - Product data representation and exchange - Part 1738: Application module: Product identification extension
- ISO-10303-1739 - Part 1739: Production Rule, Industrial Automation Systems &Integration - Product Data
- ISO-10303-1740 - Part 1740: Requirement Decomposition, Industrial Automationsystems & Integration - Pr
- ISO-10303-1741 - Part 1741: Sequential Laminate Assembly Design, Industrial Automation Systems & Integr
- ISO-10303-1742 - Industrial automation systems and integration - Product data representation and exchange - Part 1742: Application module: Shape composition
- ISO-10303-1743 - Part 1743: Application Module: Shape Parameters, Industrialautomation Systems & Integ
- ISO-10303-1744 - Part 1744: Application Module: Discrete Shield, Industrial Automation Systems & Integr
- ISO-10303-1745 - Industrial automation systems and integration - Product data representation and exchange - Part 1745: Application module: Signal
- ISO-10303-1746 - Part 1746: Application Module: Software, Industrial Automation Systems & Integration -
- ISO-10303-1747 - Part 1747: Application Module: Specification Document, Industrial Automation Systems &
- ISO-10303-1748 - Part 1748: Application Module: Stratum Non Planar Shape, Industrial Automation Systems
- ISO-10303-1749 - Part 1749: Styled Curve Related Publications, Industrial Automation Systems & Integrat
- ISO-10303-1750 - Part 1750: Application Module: Text Representation, Industrial Automation Systems & In
- ISO-10303-1751 - Industrial automation systems and integration - Product data representation and exchange - Part 1751: Application module: Test requirement allocation
- ISO-10303-1752 - Part 1752: Thermal Network Definition, Industrial Automation Systems & Integration - P
- ISO-10303-1753 - Industrial automation systems and integration - Product data representation and exchange - Part 1753: Application module: Value with unit extension
- ISO-10303-1754 - Part 1754: Application Module: via Component, Industrial Automation Systems & Integrat
- ISO-10303-1755 - Part 1755: Application Module: Physical Connectivity Definition, Industrial Automation
- ISO-10303-1756 - Part 1756: Conductivity Material Aspects, Industrial Automation Systems & Integration
- ISO-10303-1757 - Industrial automation systems and integration - Product data representation and exchange - Part 1757: Application module: Test select product
- ISO-10303-1759 - Industrial automation systems and integration - Product data representation and exchange - Part 1759: Application module: AP210 datum difference based model definition
- ISO-10303-1760 - Industrial automation systems and integration - Product data representation and exchange - Part 1760: Application module: Pre defined product data management specializations
- ISO-10303-1761 - Part 1761: Application Module: Information Product, Industrial Automation Systems & In
- ISO-10303-1762 - Industrial automation systems and integration - Product data representation and exchange - Part 1762: Application module: Generic product occurrence
- ISO-10303-1763 - Part 1763: Application Module: Integral Shield, Industrial Automation Systems & Integr
- ISO-10303-1764 - Part 1764: Shape Feature Related Publications, Industrial Automation Systems & Integra
- ISO-10303-1765 - Part 1765: Characterizable Object, Industrial Automation Systems & Integration - Produ
- ISO-10303-1772 - Industrial automation systems and integration - Product data representation and exchange - Part 1772: Application module: Ply orientation specification
- ISO-10303-1775 - Industrial automation systems and integration - Product data representation and exchange - Part 1775: Application module: Currency
- ISO-10303-1776 - Industrial automation systems and integration - Product data representation and exchange - Part 1776: Application module: Extended date
- ISO-10303-1777 - Industrial automation systems and integration - Product data representation and exchange - Part 1777: Application module: External currency
- ISO-10303-1779 - Industrial automation systems and integration - Product data representation and exchange - Part 1779: Application module: External representation item
- ISO-10303-1780 - Industrial automation systems and integration - Product data representation and exchange - Part 1780: Application module: External unit
- ISO-10303-18 - Industrial automation systems and integration - Product data representation and exchange - Part 18: Description methods: SysML XMI to Web services transformation
- ISO-10303-2 - Industrial automation systems and integration - Product data representation and exchange - Part 2: Vocabulary
- ISO-10303-201 - Industrial automation systems and integration - Product data representation and exchange - Part 201: Application protocol: Explicit draughting
- ISO-10303-202 - Industrial automation systems and integration - Product data representation and exchange - Part 202: Application protocol: Associative draughting
- ISO-10303-203 - Industrial automation systems and integration - Product data representation and exchange - Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies
- ISO-10303-203-1 - Amendment 1
- ISO-10303-203 APPLIC - Application Modules for ISO-10303-203, Industrial Automation Systems & Integration - P
- ISO-10303-204 - Industrial automation systems and integration - Product data representation and exchange - Part 204: Application protocol: Mechanical design using boundary representation
- ISO-10303-207 - Industrial automation systems and integration -- Product data representation and exchange -- Part 207: Application protocol: Sheet metal die planning and design
- ISO-10303-209 - Industrial automation systems and integration - Product data representation and exchange - Part 209: Application protocol: Multidisciplinary analysis and design
- ISO-10303-21 - Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure
- ISO-10303-210 - Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnect and packaging design
- ISO-10303-212 - Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation
- ISO-10303-214 - Industrial automation systems and integration - Product data representation and exchange - Part 214: Application protocol: Core data for automotive mechanical design processes
- ISO-10303-215 - Industrial automation systems and integration - Product data representation and exchange - Part 215: Application protocol: Ship arrangement
- ISO-10303-216 - Industrial automation systems and integration - Product data representation and exchange - Part 216: Application protocol: Ship moulded forms
- ISO-10303-218 - Industrial automation systems and integration - Product data representation and exchange - Part 218: Application protocol: Ship structures
- ISO-10303-219 - Industrial automation systems and integration - Product data representation and exchange - Part 219: Application protocol: Dimensional inspection information exchange
- ISO-10303-22 - Industrial automation systems and integration - Product data representation and exchange - Part 22: Implementation methods: Standard data access interface
- ISO-10303-221 - Industrial automation systems and integration - Product data representation and exchange - Part 221: Application protocol: Functional data and their schematic representation for process plants
- ISO-10303-223 - Industrial automation systems and integration - Product data representation and exchange - Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts
- ISO-10303-224 - Industrial automation systems and integration - Product data representation and exchange - Part 224: Application protocol: Mechanical product definition for process planning using machining features
- ISO-10303-225 - Industrial automation systems and integration -- Product data representation and exchange -- Part 225: Application protocol: Building elements using explicit shape representation
- ISO-10303-227 - Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant spatial configuration
- ISO-10303-23 - Industrial automation systems and integration -- Product data representation and exchange -- Part 23: Implementation methods: C++ language binding to the standard data access interface
- ISO-10303-232 - Industrial automation systems and integration - Product data representation and exchange - Part 232: Application protocol: Technical data packaging core information and exchange
- ISO-10303-233 - Industrial automation systems and integration - Product data representation and exchange - Part 233: Application protocol: Systems engineering
- ISO-10303-235 - Industrial automation systems and integration - Product data representation and exchange - Part 235: Application protocol: Engineering properties and materials information
- ISO-10303-236 - Industrial automation systems and integration - Product data representation and exchange - Part 236: Application protocol: Furniture catalog and interior design
- ISO-10303-238 - Industrial automation systems and integration - Product data representation and exchange - Part 238: Application protocol: Model based integrated manufacturing
- ISO-10303-239 - Industrial automation systems and integration - Product data representation and exchange - Part 239: Application protocol: Product life cycle support
- ISO-10303-24 - Industrial automation systems and integration - Product data representation and exchange - Part 24: Implementation methods: C language binding of standard data access interface
- ISO-10303-240 - Industrial automation systems and integration - Product data representation and exchange - Part 240: Application protocol: Process plans for machined products
- ISO-10303-242 - Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering
- ISO-10303-243 - Industrial automation systems and integration - Product data representation and exchange - Part 243: Application protocol: For modelling and simulation information in a collaborative systems engineering context (MoSSEC)
- ISO-10303-25 - Industrial automation systems and integration - Product data representation and exchange - Part 25: Implementation methods: EXPRESS to XMI binding
- ISO-10303-26 - Industrial automation systems - Product data representation and exchange - Part 26: Implementation methods: Binary representation of EXPRESS-driven data
- ISO-10303-27 - Industrial automation systems and integration -- Product data representation and exchange -- Part 27: Implementation methods: Java TM programming language binding to the standard data access interface with Internet/Intranet extensions
- ISO-10303-28 - Industrial automation systems and integration - Product data representation and exchange - Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas
- ISO-10303-304 - Industrial automation systems and integration -- Product data representation and exchange -- Part 304: Abstract test suite: Mechanical design using boundary representation
- ISO-10303-307 - Industrial automation systems and integration - Product data representation and exchange - Part 307: Abstract test suite: Sheet metal die planning and design
- ISO-10303-31 - Industrial automation systems and integration - Product data representation and exchange - Part 31: Conformance testing methodology and framework: General concepts
- ISO-10303-32 - Industrial automation systems and integration - Product data representation and exchange - Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
- ISO-10303-325 - Industrial automation systems and integration - Product data representation and exchange - Part 325: Abstract test suite: Building elements using explicit shape representation
- ISO-10303-332 - Industrial automation systems and integration - Product data representation and exchange - Part 332: Abstract test suite: Technical data packaging core information and exchange
- ISO-10303-34 - Industrial automation systems and integration -- Product data representation and exchange -- Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations
- ISO-10303-35 - Industrial automation systems and integration - Product data representation and exchange - Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations
- ISO-10303-35-CD - Industrial automation systems and integration -- Product data representation and exchange -- Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations
- ISO-10303-4000 - Industrial automation systems and integration - Product data representation and exchange - Part 4000: Core model
- ISO-10303-403 - Part 403: Application Module: Ap203 Configuration Controlled 3D Design of Mechanical P
- ISO-10303-41 - Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support
- ISO-10303-410 - Part 410: Application Module: Ap210 Electronic Assembly Interconnect & Packaging Desig
- ISO-10303-42 - Industrial automation systems and integration -- Product data representation and exchange -- Part 42: Integrated generic resource: Geometric and topological representation
- ISO-10303-421 - Industrial automation systems and integration - Product data representation and exchange - Part 421: Application module: Functional data and schematic representation
- ISO-10303-43 - Part 43: Integrated Generic Resource: Representation Structures, Industrial Automation Sys
- ISO-10303-436 - Industrial automation systems and integration - Product data representation and exchange - Part 436: Application module: AP236 furniture catalog and interior design
- ISO-10303-439 - Part 439: Ap239 Product Life Cycle Support, Industrial Automation Systems & Integratio
- ISO-10303-44 - Industrial automation systems and integration -- Product data representation and exchange -- Part 44: Integrated generic resource: Product structure configuration
- ISO-10303-4439 - Industrial automation systems and integration - Product data representation and exchange - Part 4439: Application domain model: Product life cycle support
- ISO-10303-45 - Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties
- ISO-10303-46 - Part 46: Integrated Generic Resources: Visual Presentation, Industrial Automation Sys
- ISO-10303-47 - Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances
- ISO-10303-49 - Industrial automation systems and integration - Product data representation and exchange - Part 49: Integrated generic resources: Process structure and properties
- ISO-10303-50 - Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resource: Mathematical constructs
- ISO-10303-5001 - Industrial automation systems and integration - Product data representation and exchange - Part 5001: Guidance on the usage of ISO 10303-214 for gear units
- ISO-10303-501 - Industrial automation systems and integration - Product data representation and exchange - Part 501: Application interpreted construct: Edge-based wireframe
- ISO-10303-502 - Industrial automation systems and integration - Product data representation and exchange - Part 502: Application interpreted construct: Shell-based wireframe
- ISO-10303-503 - Industrial automation systems and integration - Product data representation and exchange - Part 503: Application interpreted construct: Geometrically bounded 2D wireframe
- ISO-10303-504 - Industrial automation systems and integration -- Product data representation and exchange -- Part 504: Application interpreted construct: Draughting annotation
- ISO-10303-505 - Industrial automation systems and integration -- Product data representation and exchange -- Part 505: Application interpreted construct: Drawing structure and administration
- ISO-10303-506 - Industrial automation systems and integration -- Product data representation and exchange -- Part 506: Application interpreted construct: Draughting elements
- ISO-10303-507 - Industrial automation systems and integration -- Product data representation and exchange -- Part 507: Application interpreted construct: Geometrically bounded surface
- ISO-10303-508 - Industrial automation systems and integration -- Product data representation and exchange -- Part 508: Application interpreted construct: Non-manifold surface
- ISO-10303-509 - Industrial automation systems and integration -- Product data representation and exchange -- Part 509: Application interpreted construct: Manifold surface
- ISO-10303-51 - Industrial automation systems and integration - Product data representation and exchange - Part 51: Integrated generic resource: Mathematical representation
- ISO-10303-510 - Industrial automation systems and integration - Product data representation and exchange - Part 510: Application interpreted construct: Geometrically bounded wireframe
- ISO-10303-511 - Industrial automation systems and integration -- Product data representation and exchange -- Part 511: Application interpreted construct: Topologically bounded surface
- ISO-10303-512 - Industrial automation systems and integration -- Product data representation and exchange -- Part 512: Application interpreted construct: Faceted boundary representation
- ISO-10303-513 - Industrial automation systems and integration -- Product data representation and exchange -- Part 513: Application interpreted construct: Elementary boundary representation
- ISO-10303-514 - Industrial automation systems and integration -- Product data representation and exchange -- Part 514: Application interpreted construct: Advanced boundary representation
- ISO-10303-515 - Industrial automation systems and integration - Product data representation and exchange - Part 515: Application interpreted construct: Constructive solid geometry
- ISO-10303-517 - Industrial automation systems and integration - Product data representation and exchange - Part 517: Application interpreted construct: Mechanical design geometric presentation
- ISO-10303-518 - Industrial automation systems and integration - Product data representation and exchange - Part 518: Application interpreted construct: Mechanical design shaded presentation
- ISO-10303-519 - Industrial automation systems and integration - Product data representation and exchange - Part 519: Application interpreted construct: Geometric tolerances
- ISO-10303-52 - Industrial automation systems and integration - Product data representation and exchange - Part 52: Integrated generic resource: Mesh-based topology
- ISO-10303-520 - Industrial automation systems and integration -- Product data representation and exchange -- Part 520: Application interpreted construct: Associative draughting elements
- ISO-10303-521 - Industrial automation systems and integration - Product data representation and exchange - Part 521: Application interpreted construct: Manifold subsurface
- ISO-10303-522 - Industrial automation systems and integration - Product data representation and exchange - Part 522: Application interpreted construct: Machining features
- ISO-10303-523 - Industrial automation systems and integration -- Product data representation and exchange -- Part 523: Application interpreted construct: Curve swept solid
- ISO-10303-54 - Industrial automation systems and integration - Product data representation and exchange - Part 54: Integrated generic resource: Classification and set theory
- ISO-10303-55 - Industrial automation systems - Product data representation and exchange - Part 55: Integrated generic resource : Procedural and hybrid representation
- ISO-10303-56 - Industrial automation systems and integration -- Product data representation and exchange -- Part 56: Integrated generic resource: State
- ISO-10303-57 - Industrial automation systems and integration - Product data representation and exchange - Part 57: Integrated generic resource: Persistent identification of elements in procedural shape modelling
- ISO-10303-59 - Industrial automation systems and integration - Product data representation and exchange - Part 59: Integrated generic resource: Quality of product shape data
- ISO-10303-62 - Industrial automation systems and integration - Product data representation and exchange - Part 62: Integrated generic resource: Equivalence validation of product data
- ISO-10314-1 - Industrial automation - Shop floor production - Part 1: Reference model for standardization and a methodology for identification of requirements
- ISO-10314-2 - Industrial automation - Shop floor production - Part 2: Application of the reference model for standardization and methodology
- ISO-12178 - Industrial automation -- Time-critical communications architectures -- User requirements
- ISO-12186 - Manufacturing automation programming language environment overview (MAPLE)
- ISO-13281 - Industrial automation systems - Manufacturing Automation Programming Environment (MAPLE) - Functional architecture
- ISO-13281-2 - Industrial automation systems and integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and interfaces
- ISO-1346 - Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes
- ISO-13584-1 - Industrial automation systems and integration -- Parts library -- Part 1: Overview and fundamental principles
- ISO-13584-101 - Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program
- ISO-13584-102 - Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification
- ISO-13584-20 - Industrial automation systems and integration - Parts library - Part 20: Logical resource: Logical model of expressions
- ISO-13584-24 - Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library
- ISO-13584-25 - Industrial automation systems and integration - Parts library - Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content
- ISO-13584-26 - Industrial automation systems and integration - Parts library - Part 26: Logical resource: Information supplier identification
- ISO-13584-26-1 - Industrial automation systems and integration - Parts library - Part 26: Logical resource: Information supplier identification - Amendment 1
- ISO-13584-31 - Industrial automation systems and integration -- Parts library -- Part 31: Implementation resources: Geometric programming interface
- ISO-13584-32 - Industrial automation systems and integration - Parts library - Part 32: Implementation resources: OntoML: Product ontology markup language
- ISO-13584-35 - Industrial automation systems and integration - Parts library - Part 35: Implementation resources: Spreadsheet interface for parts library
- ISO-13584-42 - Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring parts families
- ISO-13584-501 - Industrial automation systems and integration - Parts library - Part 501: Reference dictionary for measuring instruments - Registration procedure
- ISO-13584-511 - Industrial automation systems and integration - Parts library - Part 511: Mechanical systems and components for general use - Reference dictionary for fasteners
- ISO-14306 - Industrial automation systems and integration - JT file format specification for 3D visualization
- ISO-15531-1 - Industrial automation systems and integration - Industrial manufacturing management data - Part 1: General overview
- ISO-15531-31 - Industrial automation systems and integration - Industrial manufacturing management data - Part 31: Resource information model
- ISO-15531-32 - Industrial automation systems and integration - Industrial manufacturing management data: Resources usage management - Part 32: Conceptual model for resources usage management data
- ISO-15531-42 - Industrial automation systems and integration - Industrial manufacturing management data - Part 42: Time Model
- ISO-15531-43 - Industrial automation systems and integration - Industrial manufacturing management data - Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange
- ISO-15531-44 - Industrial automation systems and integration - Industrial manufacturing management data - Part 44: Information modelling for shop floor data acquisition
- ISO-15745-1 - Industrial automation systems and integration - Open systems application integration framework - Part 1: Generic reference description
- ISO-15745-1-1 - Industrial automation systems and integration - Open systems application integration framework - Part 1: Generic reference description - Amendment 1
- ISO-15745-2 - Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems
- ISO-15745-3 - Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems
- ISO-15745-4 - Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems
- ISO-15745-4-1 - Amendment 1: PROFINET profiles
- ISO-15745-4-2 - - Amendment 2: Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink
- ISO-15745-4-AM2 - - Amendment 2: Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink
- ISO-15745-5 - Industrial automation systems and integration - Open systems application integration framework - Part 5: Reference description for HDLC-based control systems
- ISO-15746-1 - Automation systems and integration - Integration of advanced process control and optimization capabilities for manufacturing systems - Part 1: Framework and functional model
- ISO-15746-2 - Automation systems and integration - Integration of advanced process control and optimization capabilities for manufacturing systems - Part 2: Activity models and information exchange
- ISO-15746-3 - Automation systems and integration - Integration of advanced process control and optimization capabilities for manufacturing systems - Part 3: Verification and validation
- ISO-15926-1 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 1: Overview and fundamental principles
- ISO-15926-10 - Industrial automation systems and integration - Integration of life cycle data for process plants including oil and gas production facilities - Part 10: Conformance testing
- ISO-15926-11 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 11: Simplified industrial usage of reference data based on RDFS methodology
- ISO-15926-12 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 12: Life-cycle integration ontology represented in Web Ontology Language (OWL)
- ISO-15926-13 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 13: Integrated asset planning life-cycle
- ISO-15926-2 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 2: Data model
- ISO-15926-3 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 3: Reference data for geometry and topology
- ISO-15926-4 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Core reference data
- ISO-15926-4-AM1 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Initial reference data - Amendment 1
- ISO-15926-6 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 6: Methodology for the development and validation of reference data
- ISO-15926-7 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 7: Implementation methods for the integration of distributed systems: Template methodology
- ISO-15926-8 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 8: Implementation methods for the integration of distributed systems: Web Ontology Language (OWL) implementation
- ISO-16161 - Automation systems and integration - Use case of capability profiles for cooperation between manufacturing software units
- ISO-16739 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
- ISO-16739-1 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema
- ISO-17506 - Industrial automation systems and integration - COLLADATM digital asset schema specification for 3D visualization of industrial data
- ISO-18101-1 - Automation systems and integration - Oil and gas interoperability - Part 1: Overview and fundamental principles
- ISO-18435-1 - Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 1: Overview and general requirements
- ISO-18435-2 - Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 2: Descriptions and definitions of application domain matrix elements
- ISO-18435-3 - Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 3: Applications integration description method
- ISO-18629-1 - Industrial automation systems and integration - Process specification language - Part 1: Overview and basic principles
- ISO-18629-11 - Industrial automation systems and integration - Process specification language - Part 11: PSL core
- ISO-18629-12 - Industrial automation systems and integration - Process specification language - Part 12: Outer core
- ISO-18629-13 - Industrial automation systems and integration - Process specification language - Part 13: Duration and ordering theories
- ISO-18629-14 - Industrial automation systems and integration - Process specification language - Part 14: Resource theories
- ISO-18629-41 - Industrial automation systems and integration - Process specification language - Part 41: Definitional extension: Activity extensions
- ISO-18629-42 - Industrial automation systems and integration - Process specification language - Part 42: Definitional extension: Temporal and state extensions
- ISO-18629-43 - Industrial automation systems and integration - Process specification language - Part 43: Definitional extension: Activity ordering and duration extensions
- ISO-18629-44 - Industrial automation systems and integration - Process specification language - Part 44: Definitional extension: Resource extensions
- ISO-18828-1 - Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 1: Overview
- ISO-18828-2 - Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 2: Reference process for seamless production planning
- ISO-18828-3 - Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 3: Information flows in production planning processes
- ISO-18828-4 - Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 4: Key performance indicators (KPIs) in production planning processes
- ISO-18828-5 - Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 5: Manufacturing change management
- ISO-18876-1 - Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 1: Architecture overview and description
- ISO-18876-2 - Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 2: Integration and mapping methodology
- ISO-19439 - Enterprise integration - Framework for enterprise modelling
- ISO-19440 - Enterprise modelling and architecture - Constructs for enterprise modelling
- ISO-19450 - Automation systems and integration - Object-Process Methodology
- ISO-20123 - Automation systems and integration - Industrial data - Nuclear digital ecosystem specifications
- ISO-20242-1 - Industrial automation systems and integration - Service interface for testing applications - Part 1: Overview
- ISO-20242-2 - Industrial automation systems and integration - Service interface for testing applications - Part 2: Resource management service interface
- ISO-20242-3 - Industrial automation systems and integration - Service interface for testing applications - Part 3: Virtual device service interface
- ISO-20242-4 - Industrial automation systems and integration - Service interface for testing applications - Part 4: Device capability profile template
- ISO-20242-5 - Industrial automation systems and integration - Service interface for testing applications - Part 5: Application program service interface
- ISO-20534 - Industrial automation systems and integration - Formal semantic models for the configuration of global production networks
- ISO-22093 - Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
- ISO-23247-1 - Automation systems and integration - Digital twin framework for manufacturing - Part 1: Overview and general principles
- ISO-23247-2 - Automation systems and integration - Digital twin framework for manufacturing - Part 2: Reference architecture
- ISO-23247-3 - Automation systems and integration - Digital twin framework for manufacturing - Part 3: Digital representation of manufacturing elements
- ISO-23247-4 - Automation systems and integration - Digital twin framework for manufacturing - Part 4: Information exchange
- ISO-23301 - STEP geometry visualization services
- ISO-23952 - Automation systems and integration - Quality information framework (QIF) - An integrated model for manufacturing quality information
- ISO-24064 - Document management - Portable document format - RichMedia annotations conforming to the ISO 10303-242 (STEP AP 242) specification
- ISO-24463 - Digital validation by effective use of simulation
- ISO-24464 - Automation systems and integration - Industrial data - Visualization elements of digital twins
- ISO-29002-10 - Industrial automation systems and integration - Exchange of characteristic data - Part 10: Characteristic data exchange format
- ISO-29002-20 - Industrial automation systems and integration - Exchange of characteristic data - Part 20: Concept dictionary resolution services
- ISO-29002-31 - Industrial automation systems and integration - Exchange of characteristic data - Part 31: Query for characteristic data
- ISO-29002-4 - Industrial automation systems and integration - Exchange of characteristic data - Part 4: Basic entities and types
- ISO-29002-5 - Industrial automation systems and integration - Exchange of characteristic data - Part 5: Identification scheme
- ISO-29002-6 - Industrial automation systems and integration - Exchange of characteristic data - Part 6: Concept dictionary terminology reference model
- ISO-3151-1 - Visualization elements of PLM-MES interface - Part 1: Overview
- ISO-3511-1 - Process measurement control functions and instrumentation - Symbolic representation - Part 1: Basic requirements
- ISO-3511-2 - Process measurement control functions and instrumentation - Symbolic representation - Part 2 : Extension of basic requirements
- ISO-3511-3 - Process measurement control functions and instrumentation - Symbolic representation - Part 3 : Detailed symbols for instrument interconnection diagrams
- ISO-3511-4 - Industrial process measurement control functions and instrumentation - Symbolic representation - Part 4 : Basic symbols for process computer, interface, and shared display/control functions
- ISO-8000-1 - Data quality - Part 1: Overview
- ISO-8000-100 - Data quality - Part 100: Master data: Exchange of characteristic data: Overview
- ISO-8000-102 - Data quality - Part 102: Master data: Exchange of characteristic data: Vocabulary
- ISO-8000-110 - Data quality - Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification
- ISO-8000-114 - Data quality - Part 114: Master data: Application of ISO/IEC 21778 and ISO 8000-115 to portable data
- ISO-8000-115 - Data quality - Part 115: Master data: Exchange of quality identifiers: Syntactic, semantic and resolution requirements
- ISO-8000-116 - Data quality - Part 116: Master data: Exchange of quality identifiers: Application of ISO 8000-115 to authoritative legal entity identifiers
- ISO-8000-117 - Data quality - Part 117: Application of ISO 8000-115 to identifiers in distributed ledgers including blockchains
- ISO-8000-120 - Data quality - Part 120: Master data: Exchange of characteristic data: Provenance
- ISO-8000-130 - Data quality - Part 130: Master data: Exchange of characteristic data: Accuracy
- ISO-8000-140 - Data quality - Part 140: Master data: Exchange of characteristic data: Completeness
- ISO-8000-150 - Data quality - Part 150: Data quality management: Roles and responsibilities
- ISO-8000-2 - Data quality - Part 2: Vocabulary
- ISO-8000-2-AM1 - - Amendment 1
- ISO-8000-311 - Data quality - Part 311: Guidance for the application of product data quality for shape (PDQ-S)
- ISO-8000-51 - Data quality - Part 51: Data governance: Exchange of data policy statements
- ISO-8000-60 - Data quality - Part 60: Data quality management: Overview
- ISO-8000-61 - Data quality - Part 61: Data quality management: Process reference model
- ISO-8000-62 - Data quality - Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
- ISO-8000-63 - Data quality - Part 63: Data quality management: Process measurement
- ISO-8000-64 - Data quality - Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
- ISO-8000-65 - Data quality - Part 65: Data quality management: Process measurement questionnaire
- ISO-8000-66 - Data quality - Part 66: Data quality management: Assessment indicators for data processing in manufacturing operations
- ISO-8000-8 - Data quality - Part 8: Information and data quality: Concepts and measuring
- ISO-8000-81 - Data quality - Part 81: Data quality assessment: Profiling
- ISO-8000-82 - Data quality - Part 82: Data quality assessment: Creating data rules
- ISO-9506-1 - Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition
- ISO-9506-2 - Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification
- ISO/IEC-30166 - Internet of things (IoT) - Industrial IoT
- ISO/IEC-9506-5 - Industrial automation systems -- Manufacturing message specification -- Part 5: Companion standard for programmable controllers
- ISO/IEC-9506-6 - Industrial automation systems - Manufacturing message specification - Part 6 : Companion Standard for Process Control
- ISO/IEC-GUIDE 77-1 - Guide for specification of product properties and classes - Part 1: Fundamental benefits
- ISO/IEC-GUIDE 77-2 - Guide for specification of product properties and classes - Part 2: Technical principles and guidance
- ISO/IEC-GUIDE 77-3 - Guide for specification of product properties and classes - Part 3: Experience gained
- ISO/PAS-14306 - Industrial automation systems and integration - JT file format specification for 3D visualization
- ISO/PAS-16739 - Industry Foundation Classes, Release 2x, Platform Specification(IFC2x Platform)
- ISO/PAS-17506 - Industrial automation systems and integration - COLLADA digital asset schema specification for 3D visualization of industrial data
- ISO/PAS-20542 - Industrial automation systems and integration - Product data representation and exchange - Reference model for systems engineering
- ISO/PAS-24644-1 - Mass customization value chain management - Part 1: Framework
- ISO/PAS-26183 - SASIG Product data quality guidelines for the global automotive industry
- ISO/TC-10303-1344 - See: ISO-10303-1344
- ISO/TS-10303-1145 - See: ISO-10303-1145
- ISO/TS-10303-1156 - See: ISO-10303-1156
- ISO/TS-10303-1175 - See: ISO-10303-1175
- ISO/TS-10303-1204 - See: ISO-10303-1204
- ISO/TS-10303-1205 - Industrial automation systems and integration - Product data representation and exchange - Part 1205: Application module: Schematic element
- ISO/TS-10303-1604 - See: ISO-10303-1604
- ISO/TS-10303-1634 - See: ISO-10303-1634
- ISO/TS-10303-1656 - See: ISO-10303-1656
- ISO/TS-10303-1738 - See: ISO-10303-1738
Other SDOs:
- DS-EN-62381 - Automation systems in the process industry - Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and Site Integration Test (SIT)
- EN-12053 - Safety of Industrial Trucks - Test Methods for Measuring Noise Emissions
- EN-1349 - Industrial Process Control Valves
- EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4
- EN-60027-6 - Letter Symbols To Be Used in Electrical Technology, Control Technology
- EN-60534-2-1 - Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
- EN-60534-2-3 - Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
- EN-60534-2-4 - Industrial-Process Control Valves, Flow Capacity, Inherent Flow Characteristics & Rang
- EN-60534-4 - Industrial-Process Control Valves, Inspection & Routine Testing
- EN-60534-7 - Industrial-process control valves - Part 7: Control valve data sheet
- EN-60534-8-1 - Industrial-Process Control Valves, Noise Considerations, Laboratory Measurement of Noi
- EN-60534-8-2 - Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
- EN-60534-8-3 - Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
- EN-60534-8-4 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
- EN-60534-9 - Industrial-Process Control Valves, Test Procedure for Response Measurements From Step
- EN-60546-1 - Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance
- EN-60770-1 - Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
- EN-60770-2 - Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
- EN-60770-3 - Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
- EN-61003-1 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
- EN-61003-2 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing
- EN-61010-2-201 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
- EN-61010-2-202 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
- EN-61069-1 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
- EN-61069-2 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
- EN-61069-3 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
- EN-61069-4 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
- EN-61069-5 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
- EN-61069-6 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability
- EN-61069-7 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
- EN-61069-8 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties
- EN-61131-2 - Programmable Controllers, Equipment Requirements & Tests
- EN-61131-6 - Programmable controllers - Part 6: Functional safety
- EN-61131-9 - Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
- EN-61158-1 - Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
- EN-61158-3-1 - Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
- EN-61158-3-11 - Industrial Communication Networks, Fieldbus Specification, Data-Link Layer Service Def
- EN-61158-3-12 - Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
- EN-61158-3-13 - Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements
- EN-61158-3-14 - Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
- EN-61158-3-16 - Part 3-16: Data-Link Layer Service Definition - Type 16 Elements, Industrial Communica
- EN-61158-3-17 - Part 3-17: Data-Link Layer Service Definition - Type 17 Elements, Industrial Communica
- EN-61158-3-18 - Industrial Communication Networks, Fieldbus Specifications, Data-Link Layer Service D
- EN-61158-3-19 - Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
- EN-61158-3-2 - Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
- EN-61158-3-20 - Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 elements
- EN-61158-3-21 - Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements
- EN-61158-3-22 - Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elements
- EN-61158-3-24 - Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 elements
- EN-61158-3-3 - Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements
- EN-61158-3-4 - Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
- EN-61158-3-7 - Part 3-7: Data-Link Layer Service Definition - Type 7 Elements, Industrial Communicati
- EN-61158-3-8 - Part 3-8: Data-Link Layer Service Definition - Type 8 Elements, Industrial Communicati
- EN-61158-4-1 - Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements
- EN-61158-4-11 - Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11 elements
- EN-61158-4-12 - Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements
- EN-61158-4-13 - Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements
- EN-61158-4-14 - Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements
- EN-61158-4-16 - Part 4-16: Data-Link Layer Protocol Specification - Type 16 Elements, Industrial Comm
- EN-61158-4-17 - Part 4-17: Data-Link Layer Protocol Specification - Type 17 Elements, Industrial Comm
- EN-61158-4-18 - Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements
- EN-61158-4-19 - Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements
- EN-61158-4-2 - Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements
- EN-61158-4-21 - Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements
- EN-61158-4-22 - Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22 elements
- EN-61158-4-24 - Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements
- EN-61158-4-3 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elements
- EN-61158-4-4 - Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements
- EN-61158-4-7 - Part 4-7: Data-Link Layer Protocol Specification - Type 7 Elements, Industrial Communi
- EN-61158-4-8 - Industrial Communication Networks, Fieldbus Specifications, Data-Link Layer Protocol
- EN-61158-5-10 - Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements
- EN-61158-5-11 - Part 5-11: Application Layer Service Definition - Type 11 Elements, Industrial Communi
- EN-61158-5-12 - Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
- EN-61158-5-13 - Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements
- EN-61158-5-14 - Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
- EN-61158-5-15 - Part 5-15: Application Layer Service Definition - Type 15 Elements, Industrial Communi
- EN-61158-5-16 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Service
- EN-61158-5-17 - Part 5-17: Application Layer Service Definition - Type 17 Elements, Industrial Communi
- EN-61158-5-18 - Part 5-18: Application Layer Service Definition - Type 18 Elements, Industrial Communi
- EN-61158-5-19 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
- EN-61158-5-2 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
- EN-61158-5-20 - Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements
- EN-61158-5-21 - Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements
- EN-61158-5-22 - Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 elements
- EN-61158-5-23 - Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements
- EN-61158-5-24 - Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 elements
- EN-61158-5-3 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
- EN-61158-5-4 - Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements
- EN-61158-5-5 - Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements
- EN-61158-5-7 - Part 5-7: Application Layer Service Definition - Type 7 Elements, Industrial Communica
- EN-61158-5-8 - Part 5-8: Application Layer Service Definition - Type 8 Elements, Industrial Communica
- EN-61158-5-9 - Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements
- EN-61158-6-10 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
- EN-61158-6-11 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Protoco
- EN-61158-6-12 - Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements
- EN-61158-6-13 - Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements
- EN-61158-6-14 - Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements
- EN-61158-6-15 - Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements
- EN-61158-6-16 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Protoco
- EN-61158-6-17 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Protoco
- EN-61158-6-18 - Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18 elements
- EN-61158-6-19 - Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements
- EN-61158-6-2 - Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements
- EN-61158-6-20 - Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements
- EN-61158-6-21 - Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements
- EN-61158-6-22 - Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 elements
- EN-61158-6-23 - Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements
- EN-61158-6-3 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements
- EN-61158-6-4 - Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 elements
- EN-61158-6-5 - Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements
- EN-61158-6-7 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Protoco
- EN-61158-6-8 - Industrial Communication Networks, Fieldbus Specifications, Application Layer Protoco
- EN-61158-6-9 - Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
- EN-61285 - Industrial-process control - Safety of analyzer houses
- EN-61298-1 - Process Measurement & Control Devices, General Methods & Procedures for Evaluating Per
- EN-61298-2 - Part 2: Tests Under Reference Conditions, Process Measurement & Control Devices - Gene
- EN-61298-3 - Process Measurement & Control Devices, General Methods & Procedures for Evaluating Per
- EN-61298-4 - Part 4: Evaluation Report Content, Process Measurement & Control Devices - General Met
- EN-61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- EN-61326-2-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
- EN-61326-2-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
- EN-61326-2-3 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
- EN-61326-2-4 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
- EN-61326-2-5 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
- EN-61326-2-6 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
- EN-61326-3-1 - Electrical Equipment for Measurement, Control & Laboratory Use, Emc Requirements, Immu
- EN-61326-3-2 - Electrical Equipment for Measurement, Control & Laboratory Use, Emc Requirements, Immu
- EN-61360-6 - Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data Dictionary (IEC CDD) quality guidelines
- EN-61499-4 - Function blocks - Part 4: Rules for compliance profiles
- EN-61508-1 - Part 1: General Requirements, Functional Safety of Electrical/Electronic/Programmable
- EN-61508-2 - Part 2: Requirements for Electrical/Electronic Programmable Electronic Safety-Related
- EN-61508-3 - Part 3: Software Requirements, Functional Safety of Electrical/Electronic/Programmable
- EN-61508-4 - Part 4: Definitions & Abbreviations, Functional Safety of Electrical/Electronic/Progra
- EN-61508-5 - Part 5: Examples of Methods for the Determination of Safety Integrity Levels, Functio
- EN-61508-6 - Part 6: Guidelines on the Application of IEC-61508-2 & IEC-61508-3 (IEC-61508-6:2010),
- EN-61508-7 - Part 7: Overview of Techniques & Measures (IEC-61508-7:2010), Functional Safety of Ele
- EN-61512-3 - Batch Control, General & Site Recipe Models & Representation
- EN-61514-2 - Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
- EN-61557-9 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
- EN-61784-3 - Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
- EN-61784-3-1 - Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
- EN-61784-3-12 - Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
- EN-61784-3-13 - Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
- EN-61784-3-14 - Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
- EN-61784-3-18 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
- EN-61784-3-2 - Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
- EN-61784-3-3 - Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
- EN-61784-3-6 - Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
- EN-61784-3-8 - Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
- EN-61784-5-1 - Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1
- EN-61784-5-10 - Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
- EN-61784-5-11 - Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
- EN-61784-5-12 - Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
- EN-61784-5-13 - Industrial communication networks - Profiles - Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13
- EN-61784-5-14 - Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14
- EN-61784-5-15 - Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15
- EN-61784-5-16 - Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16
- EN-61784-5-17 - Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17
- EN-61784-5-18 - Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18
- EN-61784-5-19 - Industrial communication networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19
- EN-61784-5-2 - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
- EN-61784-5-3 - Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
- EN-61784-5-4 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
- EN-61784-5-6 - Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
- EN-61784-5-8 - Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8
- EN-61804-2 - Function Blocks (Fb) for Process Control, Specification of Fb Concept & Electronic Dev
- EN-61804-3 - Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and semantics
- EN-61804-4 - Function blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 4: EDD interpretation
- EN-61804-5 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
- EN-61918 - Industrial communication networks - Installation of communication networks in industrial premises
- EN-61987-1 - Industrial-Process Measurement & Control, Data Structures & Elements in Process Equip
- EN-61987-10 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals
- EN-61987-11 - Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures
- EN-61987-12 - Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
- EN-61987-13 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
- EN-61987-14 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
- EN-61987-15 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange
- EN-61987-16 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange
- EN-61987-21 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
- EN-61987-22 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
- EN-61987-23 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
- EN-61987-24-1 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange
- EN-61987-24-2 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
- EN-61987-24-3 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
- EN-62264-2 - Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration
- EN-62264-3 - Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
- EN-62337 - Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
- EN-62339-1 - Modular Component Interfaces for Surface-Mount Fluid Distribution Components, Elastome
- EN-62382 - Control systems in the process industry - Electrical and instrumentation loop check
- EN-62419 - Control Technology, Rules for the Designation of Measuring Instruments
- EN-62424 - Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- EN-62439 - High Availability Automation Networks
- EN-62439-1 - Part 1: General Concepts & Calculation Methods, Industrial Communication Networks - Hi
- EN-62439-2 - Part 2: Media Redundancy Protocol (Mrp), Industrial Communication Networks - High Avai
- EN-62439-4 - Part 4: Cross-Network Redundancy Protocol (Crp), Industrial Communication Networks -
- EN-62439-5 - Part 5: Beacon Redundancy Protocol (Brp), Industrial Communication Networks - High Ava
- EN-62439-6 - Part 6: Distributed Redundancy Protocol (Drp), Industrial Communication Networks - Hig
- EN-62453-1 - Field Device Tool (FDT) interface specification - Part 1: Overview and guidance
- EN-62453-2 - Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description
- EN-62453-301 - Part 301: Communication Profile Integration - IEC-61784 Cpf 1, Field Device Tool (Fdt
- EN-62453-302 - Part 302: Communication Profile Integration - IEC-61784 Cpf 2, Field Device Tool (Fdt
- EN-62453-303-1 - Part 303-1: Communication Profile Integration - IEC-61784 Cp 3/1 & Cp 3/2, (IEC-62453-
- EN-62453-303-2 - Part 303-2: Communication Profile Integration - IEC-61784 Cp 3/4, Cp 3/5 & Cp 3/6 (IEC
- EN-62453-306 - Part 306: Communication Profile Integration - IEC-61784 Cpf6 6 (IEC-62453-306:2009), F
- EN-62453-309 - Part 309: Communication Profile Integration - IEC-61784 Cpf 9 (IEC-62453-309:2009), F
- EN-62453-315 - Part 315: Communication Profile Integration - IEC-61784 Cpf 15 (IEC-62453-315:2009),
- EN-62460 - Temperature, Electromotive Force (Emf) Tables for Pure-Element Thermocouple Combinatio
- EN-62541-10 - OPC unified architecture - Part 10: Programs
- EN-62541-100 - OPC unified architecture - Part 100: Device Interface
- EN-62541-11 - OPC unified architecture - Part 11: Historical Access
- EN-62541-13 - OPC unified architecture - Part 13: Aggregates
- EN-62541-3 - OPC unified architecture - Part 3: Address Space Model
- EN-62541-4 - OPC unified architecture - Part 4: Services
- EN-62541-5 - OPC unified architecture - Part 5: Information Model
- EN-62541-6 - OPC unified architecture - Part 6: Mappings
- EN-62541-7 - OPC unified architecture - Part 7: Profiles
- EN-62541-8 - OPC unified architecture - Part 8: Data Access
- EN-62541-9 - OPC unified architecture - Part 9: Alarms and conditions
- EN-62591 - Industrial communication networks - Wireless communication network and communication profiles - WirelessHART
- EN-62601 - Industrial networks - Wireless communication network and communication profiles - WIA-PA
- EN-62657-2 - Industrial communication networks - Wireless communication networks - Part 2: Coexistence management
- EN-62708 - Document kinds for Electrical and Instrumentation Projects in the Process Industry
- EN-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Part 1: Architecture and General Requirements
- EN-62714-2 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Role class libraries
- EN-62769-1 - Field device integration (FDI) - Part 1: Overview
- EN-62769-101-1 - Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1
- EN-62769-101-2 - Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE
- EN-62769-103-1 - Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS
- EN-62769-103-4 - Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET
- EN-62769-109-1 - Field Device Integration (FDI) - Part 109-1: Profiles - HART-« and WirelessHART-«
- EN-62769-2 - Field Device Integration (FDI) - Part 2: FDI Client
- EN-62769-3 - Devices and integration in enterprise systems; Field Device Integration - Part 3: FDI Server
- EN-62769-4 - Field Device Integration (FDI) - Part 4: FDI Packages
- EN-62769-5 - Field Device Integration (FDI) - Part 5: FDI Information Model
- EN-62769-6 - Field Device Integration (FDI) - Part 6: FDI Technology Mapping
- EN-62769-7 - Field Device Integration (FDI) - Part 7: FDI Communication Devices
- EN-62948 - Industrial networks. Wireless communication network and communication profiles. WIA-FA
- EN-IEC-60534-3-1 - Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2019)
- EN-IEC-61010-2-201 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
- EN-IEC-61131-10 - Programmable controllers - Part 10: PLC open XML exchange format (IEC 61131-10:2019)
- EN-IEC-61158-1 - Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series (IEC 61158-1:2019)
- EN-IEC-61158-5-12 - Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements (IEC 61158-5-12:2019)
- EN-IEC-61158-5-19 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements (IEC 61158-5-19:2019)
- EN-IEC-61158-5-2 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements (IEC 61158-5-2:2019)
- EN-IEC-61158-5-21 - Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements (IEC 61158-5-21:2019)
- EN-IEC-61158-5-23 - Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements (IEC 61158-5-23:2019)
- EN-IEC-61158-5-25 - Industrial communication networks - Fieldbus specifications - Part 5-25: Application layer service definition - Type 25 elements (IEC 61158-5-25:2019)
- EN-IEC-61158-5-26 - Industrial communication networks - Fieldbus specifications - Part 5-26: Application layer service definition - Type 26 elements (IEC 61158-5-26:2019)
- EN-IEC-61158-5-4 - Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elements (IEC 61158-5-4:2019)
- EN-IEC-61326-3-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment (IEC 61326-3-2:2017)
- EN-IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept
- EN-IEC-61918 - Industrial communication networks - Installation of communication networks in industrial premises (IEC 61918:2018)
- EN-IEC-62443-3-3 - Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels (IEC 62443-3-3:2013)
- EN-IEC-62443-4-1 - Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements
- EN-IEC-62443-4-2 - Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components (IEC 62443-4-2:2019)
- EN-IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Part 1: Architecture and General Requirements
- EN-IEC-62828-1 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
- EN-IEC-62828-2 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
- EN-IEC-62828-3 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
- EN-IEC-62881 - Cause and Effect Matrix (IEC 62881:2018)
- EN-ISO-11064-1 - Part 1: Principles for the Design of Control Centres, Ergonomic Design of Control Cent
- EN-ISO-11064-2 - Ergonomic Design of Control Centres, Principles for the Arrangement of Control Suites
- EN-ISO-19439 - Enterprise Integration, Framework for Enterprise Modeling
- EN-ISO-19440 - Enterprise Integration, Constructs for Enterprise Modelling
- IEC-61784-3-18-AM2 - Amendment 2 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
- JIS-B-0155 - Industrial-process measurement and control -- Terms and definitions
- JIS-B-2005-3-1 - Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
- JIS-B-2005-3-2 - Industrial-process control valves -- Part 3-2: Dimensions -- Face-to-face dimensions for rotary control valves except butterfly valves
- JIS-B-2005-3-3 - Industrial-process control valves -- Part 3-3: Dimensions -- End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
- JIS-B-2005-6-2 - Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to control valves -- Positioner mounting on rotary actuators
- JIS-B-3502 - Programmable Controllers - Equipment Requirements & Tests
- SIS-ISO-16161 - Automation systems and integration - Use case of capability profiles for cooperation between manufacturing software units
- SIS-ISO-18101-1 - Oil and Gas asset management and operations and maintenance interoperability (OGI) - Part 1: Overview and fundamental principles
- SIS-ISO/TR-24464 - Automation systems and integration Industrial data Visualization elements of digital twins (ISO/TR 24464:2020)
- SIS-ISO/TS-10303-15 - Industrial automation systems and integration - Product data representation and exchange - Part 15: Description methods: SysML XMI to XSD transformation (ISO/TS 10303-15:2021)
- SIS-ISO/TS-10303-16 - Industrial automation systems and integration - Product data representation and exchange - Part 16: Description methods: SysML XMI to EXPRESS transformation (ISO/TS 10303-16:2021)
- SIS-ISO/TS-10303-4000 - Industrial automation systems and integration - Product data representation and exchange - Part 4000: Core Model (ISO/TS 10303-4000:2022, IDT)
- SIS-ISO/TS-15926-12 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 12: Life-cycle integration ontology represented in Web Ontology Language (OWL) (ISO/TS 15926-12:2018, IDT)
- SIS-ISO/TS-8000-65 - Data quality - Part 65: Process Measurement Questionnaire
- SIS-ISO/TS-8000-81 - Data quality Part 81: Data quality assessment: Profiling (ISO/TS 8000-81:2021)
- SIS/TR-66 - Industrial data and interoperability -Scandinavian Smart Industry Framework (SSIF)
- SMS-Rapport-34 - IPC - In-Place-Cost - Consider IPC and reduce the fastener assembly costs
- SMS-Rapport-39 - Industrial automation - Shop floor production,Industrial automation - Shop floor production
- SS-2640 - Tabular layouts of article characteristics - Terminology and principles
- SS-EN-1060-2 - Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers
- SS-EN-13183-1 - Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method
- SS-EN-13458-2 - Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- SS-EN-13530-2 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- SS-EN-1993-1-10 - Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
- SS-EN-303-3 - Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner
- SS-EN-61508-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
- SS-EN-61784-3-3 - Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
- SS-EN-681-1 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-ISO-10303-210 - Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection and packaging design (ISO 10303-210:2001)
- SS-EN-ISO-11354-1 - Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability (ISO 11354-1:2011)
- SS-EN-ISO-13366-1 - Milk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method) (ISO 13366-1:2008)
- SS-EN-ISO-16526-2 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
- SS-EN-ISO-16739 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries (ISO 16739:2013)
- SS-EN-ISO-16739-1 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2018)
- SS-EN-ISO-19439 - Enterprise integration - Framework for enterprise modelling (ISO 19439:2006)
- SS-EN-ISO-19440 - Enterprise integration - Constructs for enterprise modelling (ISO 19440:2007)
- SS-EN-ISO-19957 - Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2021)
- SS-ENV-13550 - Advanced Manufacturing Technology - Systems Architecture - Enterprise Model Evaluation and Integrated Services
- SS-ISO-10303-1 - Industrial automation systems and integration Product data representation and exchange Part 1: Overview and fundamental principles (ISO 10303-1:2021, IDT)
- SS-ISO-10303-101 - Industrial automation systems and integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting (ISO 10303-101:2018, IDT)
- SS-ISO-10303-104 - Industrial automation systems and integration - Product data representation and exchange - Part 104: Integrated application resource: Finite element analysis
- SS-ISO-10303-105 - Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics
- SS-ISO-10303-107 - Industrial automation systems - Product data representation and exchange - Part 107: Integrated application resource: Finite element analysis definition relationships (ISO 10303-107:2006, IDT)
- SS-ISO-10303-108 - Industrial automation systems - Product data representation and exchange - Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models (ISO 10303-108:2005, IDT)
- SS-ISO-10303-109 - Industrial automation systems - Product data representation and exchange - Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models (ISO 10303-109:2004, IDT)
- SS-ISO-10303-11 - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled machine tools axes - Technical corrigendum 1
- SS-ISO-10303-112 - Industrial automation systems and integration - Product data representation and exchange - Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models (ISO 10303-112:2006, IDT)
- SS-ISO-10303-14 - Industrial automation systems and integration - Product data representation and exchange - Part 14: Description methods: The EXPRESS-X language reference manual (ISO 10303-14:2005, IDT)
- SS-ISO-10303-201 - Industrial automation systems and integration - Product data representation and exchange - Part 201: Application protocol: Explicit draughting
- SS-ISO-10303-202 - Industrial automation systems and integration - Product data representation and exchange - Part 202: Application protocol: Associative draughting
- SS-ISO-10303-203 - Industrial automation systems and integration - Product data representation and exchange - Part 203: Application protocol: Configuration controlled design (ISO 10303-203:1994/Cor 3:2004, IDT)
- SS-ISO-10303-203-AM1 - Industrial automation systems and integration - Product data representation and exchange - Part 203: Application protocol: Configuration controlled design - Amendment 1
- SS-ISO-10303-204 - Industrial automation systems and integration - Product data representation and exchange - Part 204: Application protocol: Mechanical design using boundary representation
- SS-ISO-10303-207 - Industrial automation systems and integration - Product data representation and exchange - Part 207: Application protocol: Sheet metal die planning and design
- SS-ISO-10303-209 - Industrial automation systems and integration - Product data representation and exchange - Part 209: Application protocol: Composite and metallic structural analysis and related design
- SS-ISO-10303-21 - Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure (ISO 10303-21:2016, IDT)
- SS-ISO-10303-210 - Industrial automation systems and integration Product data representation and exchange Part 210: Application protocol: Electronic assembly, interconnect and packaging design (ISO 10303-210:2021, IDT)
- SS-ISO-10303-212 - Industrial automation systems and integration - Product data representation and exchange - Part 212: Application protocol: Electrotechnical design and installation
- SS-ISO-10303-214 - Industrial automation systems and integration - Product data representation and exchange - Part 214: Application protocol: Core data for automotive mechanical design processes (ISO 10303-214:2010, IDT)
- SS-ISO-10303-215 - Industrial automation systems and integration - Product data representation and exchange - Part 215: Application protocol: Ship arrangement
- SS-ISO-10303-216 - Industrial automation systems and integration - Product data representation and exchange - Part 216: Application protocol: Ship moulded forms (ISO 10303-216:2003, IDT)
- SS-ISO-10303-218 - Industrial automation systems and integration - Product data representation and exchange - Part 218: Application protocol: Ship structures (ISO 10303-218:2004, IDT)
- SS-ISO-10303-219 - Industrial automation systems and integration - Product data representation and exchange - Part 219: Application protocol: Dimensional inspection information exchange (ISO 10303-219:2007, IDT)
- SS-ISO-10303-22 - Industrial automation systems and integration - Product data representation and exchange - Part 22: Implementation methods: Standard data access interface
- SS-ISO-10303-221 - Industrial automation systems and integration - Product data representation and exchange - Part 221: Application protocol: Functional data and their schematic representation for process plants (ISO 10303-221:2007, IDT)
- SS-ISO-10303-224 - Industrial automation systems and integration - Product data representation and exchange - Part 224: Application protocol: Mechanical product definition for process planning using machining features
- SS-ISO-10303-225 - Industrial automation systems and integration - Product data representation and exchange - Part 225: Application protocol: Building elements using explicit shape representation
- SS-ISO-10303-227 - Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant spatial configuration (ISO 10303-227:2005, IDT)
- SS-ISO-10303-23 - Industrial automation systems and integration - Product data representation and exchange - Part 23: Implementation methods: C++ language binding to the standard data access interface
- SS-ISO-10303-232 - Industrial automation systems and integration - Product data representation and exchange - Part 232: Application protocol: Technical data packaging core information and exchange
- SS-ISO-10303-235 - Industrial automation systems and integration - Product data representation and exchange - Part 235: Application protocol: Engineering properties and materials information (ISO 10303-235:2019, IDT)
- SS-ISO-10303-236 - Industrial automation systems and integration - Product data representation and exchange - Part 236: Application protocol: Furniture catalog and interior design (ISO 10303-236:2006, IDT)
- SS-ISO-10303-238 - Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Model based integrated manufacturing (ISO 10303-238:2022, IDT)
- SS-ISO-10303-239 - Industrial automation systems and integration - Product data representation and exchange - Part 239: Application protocol: Product life cycle support (ISO 10303-239:2012, IDT)
- SS-ISO-10303-24 - Industrial automation systems and integration - Product data representation and exchange - Part 24: Implementation methods: C language binding of standard data access interface
- SS-ISO-10303-240 - Industrial automation systems and integration - Product data representation and exchange - Part 240: Application Protocol: Process plans for machined products (ISO 10303-240:2005, IDT)
- SS-ISO-10303-242 - Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering (ISO 10303-242, IDT)
- SS-ISO-10303-243 - Industrial automation systems and integration Product data representation and exchange Part 243: Application protocol: For modelling and simulation information in a collaborative systems engineering context (MoSSEC) (ISO 10303-243:2021, IDT)
- SS-ISO-10303-28 - Industrial automation systems and integration - Product data representation and exchange - Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas (ISO 10303-28:2007, IDT)
- SS-ISO-10303-31 - Industrial automation systems and integration - Product data representation and exchange - Part 31:Conformance testing methodology and framework: General concepts
- SS-ISO-10303-32 - Industrial automation systems and integration - Product data representation and exchange - Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
- SS-ISO-10303-34 - Industrial automation systems and integration - Product data representation and exchange - Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations
- SS-ISO-10303-41 - Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support (ISO 10303-41:2018, IDT)
- SS-ISO-10303-42 - Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation (ISO 10303-42:2018, IDT)
- SS-ISO-10303-43 - Industrial automation systems and integration - Product data representation and exchange - Part 43: Integrated generic resource: Representation structures (ISO 10303-43:2018, IDT)
- SS-ISO-10303-44 - Industrial automation systems and integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration (ISO 10303-44:2018, IDT)
- SS-ISO-10303-45 - Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties (ISO 10303-45:2018, IDT)
- SS-ISO-10303-46 - Industrial automation systems and integration - Product data representation and exchange - Part 46: Integrated generic resource: Visual presentation (ISO 10303-46:2018, IDT)
- SS-ISO-10303-47 - Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances (ISO 10303-47:2018, IDT)
- SS-ISO-10303-49 - Industrial automation systems and integration - Product data representation and exchange - Part 49: Integrated generic resources: Process structure and properties
- SS-ISO-10303-50 - Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resource: Mathematical constructs
- SS-ISO-10303-501 - Industrial automation systems and integration - Product data representation and exchange - Part 501: Application interpreted construct: Edge-based wireframe
- SS-ISO-10303-502 - Industrial automation systems and integration - Product data representation and exchange - Part 502: Application interpreted construct: Shell-based wireframe
- SS-ISO-10303-503 - Industrial automation systems and integration - Product data representation and exchange - Part 503: Application interpreted construct: Geometrically bounded 2D wireframe (ISO 10303-503:2000/Cor 1:2006, IDT)
- SS-ISO-10303-504 - Industrial automation systems and integration - Product data representation and exchange - Part 504: Application interpreted construct: Draughting annotation
- SS-ISO-10303-505 - Industrial automation systems and integration - Product data representation and exchange - Part 505: Application interpreted construct: Drawing structure and administration
- SS-ISO-10303-506 - Industrial automation systems and integration - Product data representation and exchange - Part 506: Application interpreted construct: Draughting elements
- SS-ISO-10303-507 - Industrial automation systems and integration - Product data representation and exchange - Part 507: Application interpreted construct: Geometrically bounded surface
- SS-ISO-10303-508 - Industrial automation systems and integration - Product data representation and exchange - Part 508: Application interpreted construct: Part 508: Non-manifold surface
- SS-ISO-10303-509 - Industrial automation systems and integration - Product data representation and exchange - Part 509: Application interpreted construct: Manifold surface
- SS-ISO-10303-51 - Industrial automation systems and integration - Product data representation and exchange - Part 51: Integrated generic resource: Mathematical description (ISO 10303-51:2005, IDT)
- SS-ISO-10303-510 - Industrial automation systems and integration - Product data representation and exchange - Part 510: Application interpreted construct: Geometrically bounded wireframe
- SS-ISO-10303-511 - Industrial automation systems and integration - Product data representation and exchange - Part 511: Application interpreted construct: Topologically bounded surface
- SS-ISO-10303-512 - Industrial automation systems and integration - Product data representation and exchange - Part 512: Application interpreted construct: Faceted boundary representation (ISO 10303-512:1999, IDT)
- SS-ISO-10303-513 - Industrial automation systems and integration - Product data representation and exchange - Part 513: Application interpreted construct: Elementary boundary representation
- SS-ISO-10303-514 - Industrial automation systems and integration - Product data representation and exchange - Part 514: Application interpreted construct: Advanced boundary representation (ISO 10303-514:1999, IDT)
- SS-ISO-10303-515 - Industrial automation systems and integration - Product data representation and exchange - Part 515: Application interpreted construct: Constructive solid geometry
- SS-ISO-10303-517 - Industrial automation systems and integration - Product data representation and exchange - Part 517: Application interpreted construct: Mechanical design geometric presentation - Technical Corrigendum 1
- SS-ISO-10303-518 - Industrial automation systems and integration - Product data representation and exchange - Part 518: Application interpreted construct: Mechanical design shaded presentation (ISO 10303-518:2014, IDT)
- SS-ISO-10303-519 - Industrial automation systems and integration - Product data representation and exchange - Part 519: Application interpreted construct: Geometric tolerances
- SS-ISO-10303-52 - Industrial automation systems and integration - Product data representation and exchange - Part 52: Integrated generic resource: Mesh-based topology (ISO 10303-52:2011, IDT)
- SS-ISO-10303-520 - Industrial automation systems and integration - Product data representation and exchange - Part 520: Application interpreted construct: Associative draughting elements (ISO 10303-520:2018, IDT)
- SS-ISO-10303-521 - Industrial automation systems and integration - Product data representation and exchange - Part 521: Application interpreted construct : Manifold subsurface
- SS-ISO-10303-522 - Industrial automation systems and integration - Product data representation and exchange - Part 522: Application interpreted construct: Machining features (ISO 10303-522:2014, IDT)
- SS-ISO-10303-523 - Industrial automation systems and integration - Product data representation and exchange - Part 523: Application interpreted construct: Curve swept solid
- SS-ISO-10303-54 - Industrial automation systems and integration - Product data representation and exchange - Part 54: Integrated generic resource: Classification and set theory (ISO 10303-54:2005, IDT)
- SS-ISO-10303-55 - Industrial automation systems and integration - Product data representation and exchange - Part 55: Integrated generic resource: Procedural and hybrid representation (ISO 10303-55:2005, IDT)
- SS-ISO-10303-56 - Industrial automation systems and integration - Product data representation and exchange - Part 56: Integrated generic resource: State (ISO 10303-56:2005, IDT)
- SS-ISO-10303-59 - Industrial automation systems and integration Product data representation and exchange Part 59: Integrated generic resource: Quality of product shape data (ISO 10303-59:2021, IDT)
- SS-ISO-11758 - Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance
- SS-ISO-13584-1 - Industrial automation systems and integration - Parts library - Part 1: Overview and fundamental principles
- SS-ISO-13584-101 - Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program
- SS-ISO-13584-102 - Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification (ISO 13584-102:2006, IDT)
- SS-ISO-13584-20 - Industrial automation systems and integration - Parts library - Part 20: Logical resource: Logical model of expressions
- SS-ISO-13584-24 - Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library
- SS-ISO-13584-25 - Industrial automation systems and integration - Parts library - Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content (ISO 13584-25:2004, IDT)
- SS-ISO-13584-26 - Industrial automation systems and integration - Parts library - Part 26: Logical resources: Information supplier identification
- SS-ISO-13584-31 - Industrial automation systems and integration - Parts library - Part 31: Implementation resources: Geometric programming interface
- SS-ISO-13584-42 - Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families
- SS-ISO-13584-511 - Industrial automation systems and integration - Parts library - Part 511: Mechanical systems and components for general use - Reference dictionary for fasteners (ISO 13584-511:2006, IDT)
- SS-ISO-14306 - Industrial automation systems and integration - JT file format specification for 3D visualization (ISO 14306:2017, IDT)
- SS-ISO-15037-1 - Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars (ISO 15037-1:2019, IDT)
- SS-ISO-15113 - Rubber - Determination of frictional properties (ISO 15113:2005, IDT)
- SS-ISO-15531-1 - Industrial automation systems and integration - Industrial manufacturing management data - General overview
- SS-ISO-15531-31 - Industrial automation systems and integration - Industrial manufacturing management data - Part 31: Resource information model (ISO 15531-31:2004, IDT)
- SS-ISO-15531-32 - Industrial automation systems and integration - Industrial manufacturing management data: Resources usages management - Part 32: Conceptual model for resources usage management data (ISO 15531-32:2005, IDT)
- SS-ISO-15531-42 - Industrial automation systems and integration - Industrial manufacturing management data - Part 42: Time model (ISO 15531-42:2005, IDT)
- SS-ISO-15531-43 - Industrial automation systems and integration - Industrial manufacturing management data - Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange (ISO 15531-43:2006, IDT)
- SS-ISO-15745-1 - Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems
- SS-ISO-15745-1-AM1 - Industrial automation systems and integration - Open systems application integration framework - Part 1: Generic reference description (ISO 15745-1:2003/Amd 1:2007, IDT)
- SS-ISO-15745-2 - Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898 based control systems
- SS-ISO-15745-3 - Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems
- SS-ISO-15745-4 - Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems
- SS-ISO-15745-4-AM1 - Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems (ISO 15745-4:2003/Amd 1, IDT)
- SS-ISO-15745-4-AM2 - Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems - Amendment 2: Profiles for Modbus TCP, EtherCAT and ETHERNETPowerlink (ISO 15745-4:2003/Amd 2:2007, IDT)
- SS-ISO-15745-5 - Industrial automation systems and integration - Open systems application integration framework - Part 5: Reference description for HDLC-based control systems (ISO 15745-5:2007, IDT)
- SS-ISO-15926-1 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 1: Overview and fundamental principles (ISO 15926-1:2004, IDT)
- SS-ISO-15926-2 - Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilitates - Part 2: Data model (ISO 15926-2:2003, IDT)
- SS-ISO-18629-1 - Industrial automation systems and integration - Process specification language - Part 1: Overview and basic principles (ISO 18629-1:2004, IDT)
- SS-ISO-18629-11 - Industrial automation systems and integration - Process specification language - Part 11: PSL-Core (ISO 18629-11:2005, IDT)
- SS-ISO-18629-12 - Industrial automation systems and integration - Process specification language - Part 12: Outer core (ISO 18629-12:2005, IDT)
- SS-ISO-18629-13 - Industrial automation systems and integration - Process specification language - Part 13: Duration and ordering theories (ISO 18629-13:2006, IDT)
- SS-ISO-18629-14 - Industrial automation systems and integration - Process specification language - Part 14: Resource theories (ISO 18629-14:2006, IDT)
- SS-ISO-18629-41 - Industrial automation systems and integration - Process specification language - Part 41: Definitional extension: Activity extensions (ISO 18629-41:2006, IDT)
- SS-ISO-18629-42 - Industrial automation systems and integration - Process specification language - Part 42: Definitional extension:Temporal and state extensions (ISO 18629-42:2006, IDT)
- SS-ISO-18629-43 - Industrial automation systems and integration - Process specification language - Part 43: Definitional extension: Activity ordering and duration extensions (ISO 18629-43:2006, IDT)
- SS-ISO-18629-44 - Industrial automation systems and integration - Process specification language - Part 44: Definitional extension: Resource extensions (ISO 18629-44:2006, IDT)
- SS-ISO-20242-1 - Industrial automation systems and integration - Service interface for testing applications - Part 1: Overview (ISO 20242-1:2005, IDT)
- SS-ISO-22093 - Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS) (ISO 22093:2011, IDT)
- SS-ISO-23247-1 - Automation systems and integration Digital twin framework for manufacturing Part 1: Overview and general principles (ISO 23247-1:2021, IDT)
- SS-ISO-23247-2 - Automation systems and integration Digital twin framework for manufacturing Part 2: Reference architecture (ISO 23247-2:2021, IDT)
- SS-ISO-23247-3 - Automation systems and integration Digital twin framework for manufacturing Part 3: Digital representation of manufacturing elements (ISO 23247-3:2021, IDT)
- SS-ISO-23247-4 - Automation systems and integration Digital twin framework for manufacturing Part 4: Information exchange (ISO 23247-4:2021, IDT)
- SS-ISO-23952 - Automation systems and integration - Quality information framework (QIF) - An integrated model for manufacturing quality information (ISO 23952:2020, IDT)
- SS-ISO-3511-1 - Process measurement control functions and instrumentation - Symbolic representation - Part 1: Basicrequirements
- SS-ISO-3511-2 - Process measurement control functions and instrumentation - Symbolic representation - Part 2: Extensions of basic requirements
- SS-ISO-3511-3 - Process measurement control functions and instrumentation - Symbolic representation - Part 3: Detailed symbols for instrument interconnection diagrams
- SS-ISO-3511-4 - Industrial process measurement control functions and instrumentation - Symbolic representation - Part 4: Basic symbols for process computer, interface, and shared display/control functions
- SS-ISO-7269 - Rubber - Determination of free sulfur
- SS-ISO-7628-2 - Road vehicles - Thermoplastics tubing for air braking system - Part 2: Mounting on vehicle and test methods
- SS-ISO-8000-1 - Data quality - Part 1: Overview (ISO 8000-1:2022, IDT)
- SS-ISO-8000-2 - Data quality - Part 2: Vocabulary (ISO 8000-2:2022, IDT)
- SS-ISO-8000-8 - Data quality - Part 8: Information and data quality: Concepts and measuring (ISO 8000-8:2015, IDT)
- SS-ISO-9506-1 - Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition
- SS-ISO-9506-2 - Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification