01.04: Steel--Structural, Reinforcing, Pressure Vessel, Railway
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-A1 - Standard Specification for Carbon Steel Tee Rails
- ASTM-A1017 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
- ASTM-A1022 - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM-A1026 - Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing (Withdrawn 2007)
- ASTM-A1032 - Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
- ASTM-A1034 - Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
- ASTM-A1035 - Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM-A1041 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten (Withdrawn 2013)
- ASTM-A1043 - Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
- ASTM-A1044 - Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM-A1055 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- ASTM-A1058 - Standard Test Methods for Mechanical Testing of Steel Products—Metric
- ASTM-A1060 - Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM-A1061 - Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
- ASTM-A1064 - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM-A1066 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
- ASTM-A1077 - Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
- ASTM-A1078 - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
- ASTM-A1081 - Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
- ASTM-A1094 - Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
- ASTM-A1096 - Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
- ASTM-A1106 - Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
- ASTM-A131 - Standard Specification for Structural Steel for Ships
- ASTM-A183 - Standard Specification for Carbon Steel Track Bolts and Nuts
- ASTM-A184 - Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM-A185 - Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete (Withdrawn 2013)
- ASTM-A2 - Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
- ASTM-A20 - Standard Specification for General Requirements for Steel Plates for Pressure Vessels
- ASTM-A202 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon (Withdrawn 2004)
- ASTM-A203 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
- ASTM-A204 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
- ASTM-A225 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
- ASTM-A242 - Standard Specification for High-Strength Low-Alloy Structural Steel
- ASTM-A263 - Standard Specification for Stainless Chromium Steel-Clad Plate
- ASTM-A264 - Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
- ASTM-A265 - Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
- ASTM-A283 - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
- ASTM-A284 - Specification for Low and Intermediate Tensile Strength Carbon-Silicon Steel Plates for Machine Parts and General Construction
- ASTM-A285 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
- ASTM-A299 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
- ASTM-A3 - Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
- ASTM-A302 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- ASTM-A328 - Standard Specification for Steel Sheet Piling
- ASTM-A353 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
- ASTM-A36 - Standard Specification for Carbon Structural Steel
- ASTM-A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM-A387 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM-A416 - Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- ASTM-A421 - Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
- ASTM-A435 - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM-A441 - Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel
- ASTM-A455 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
- ASTM-A49 - Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
- ASTM-A496 - Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement (Withdrawn 2013)
- ASTM-A497 - Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete (Withdrawn 2013)
- ASTM-A514 - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
- ASTM-A515 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
- ASTM-A516 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
- ASTM-A517 - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
- ASTM-A529 - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM-A533 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- ASTM-A537 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
- ASTM-A542 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
- ASTM-A543 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
- ASTM-A553 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
- ASTM-A562 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
- ASTM-A572 - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM-A573 - Standard Specification for Structural Carbon Steel Plates of Improved Toughness
- ASTM-A577 - Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
- ASTM-A578 - Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
- ASTM-A588 - Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
- ASTM-A6 - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM-A612 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
- ASTM-A615 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM-A615M - Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement (Metric)
- ASTM-A616 - Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
- ASTM-A617 - Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
- ASTM-A631 - Specification for Cast Steel Wheels for Electrical Railway Service (Withdrawn 1993)
- ASTM-A633 - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
- ASTM-A645 - Standard Specification for Pressure Vessel Plates, 5 % and 5
% Nickel Alloy Steels, Specially Heat Treated1 2 - ASTM-A648 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
- ASTM-A65 - Standard Specification for Steel Track Spikes (Withdrawn 2022)
- ASTM-A656 - Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
- ASTM-A658 - Specification for Pressure Vessel Plates, Alloy Steel, 36 Percent Nickel (Withdrawn 1988)
- ASTM-A66 - Standard Specification for Steel Screw Spikes
- ASTM-A662 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM-A67 - Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
- ASTM-A673 - Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM-A678 - Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates (Withdrawn 2010)
- ASTM-A690 - Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
- ASTM-A699 - Specification for Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel Plates (Withdrawn 1985)
- ASTM-A704 - Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
- ASTM-A706 - Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
- ASTM-A709 - Standard Specification for Structural Steel for Bridges
- ASTM-A710 - Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
- ASTM-A722 - Standard Specification for High-Strength Steel Bars for Prestressed Concrete
- ASTM-A724 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
- ASTM-A734 - Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered (Withdrawn 2017)
- ASTM-A735 - Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service (Withdrawn 2017)
- ASTM-A736 - Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
- ASTM-A737 - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
- ASTM-A738 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
- ASTM-A751 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
- ASTM-A759 - Standard Specification for Carbon Steel Crane Rails
- ASTM-A767 - Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
- ASTM-A769 - Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
- ASTM-A770 - Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
- ASTM-A775 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars
- ASTM-A779 - Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
- ASTM-A782 - Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel (Withdrawn 2010)
- ASTM-A786 - Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
- ASTM-A808 - Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005)
- ASTM-A82 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement (Withdrawn 2013)
- ASTM-A820 - Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
- ASTM-A821 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
- ASTM-A827 - Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
- ASTM-A829 - Standard Specification for Alloy Structural Steel Plates
- ASTM-A830 - Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM-A832 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
- ASTM-A841 - Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
- ASTM-A844 - Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
- ASTM-A852 - Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick (Withdrawn 2010)
- ASTM-A857 - Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
- ASTM-A864 - Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997)
- ASTM-A871 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM-A881 - Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
- ASTM-A882 - Standard Specification for Epoxy-Coated Seven-Wire Prestressing Steel Strand
- ASTM-A884 - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
- ASTM-A886 - Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
- ASTM-A898 - Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
- ASTM-A910 - Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
- ASTM-A911 - Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
- ASTM-A913 - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
- ASTM-A933 - Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement (Withdrawn 2016)
- ASTM-A934 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
- ASTM-A941 - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- ASTM-A944 - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM-A945 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
- ASTM-A950 - Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
- ASTM-A951 - Standard Specification for Steel Wire for Masonry Joint Reinforcement
- ASTM-A955 - Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
- ASTM-A970 - Standard Specification for Headed Steel Bars for Concrete Reinforcement
- ASTM-A981 - Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
- ASTM-A992 - Standard Specification for Structural Steel Shapes
- ASTM-A996 - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
- ASTM-D3963 - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars